Spelling suggestions: "subject:"pilot modelling"" "subject:"milot modelling""
1 |
Pilot modelling for airframe loads analysisLone, M. Mudassir 01 1900 (has links)
The development of large lightweight airframes has resulted in what used to be high frequency
structural dynamics entering the low frequency range associated with an aircraft’s rigid body dynamics.
This has led to the potential of adverse interactions between the aeroelastic effects and
flight control, especially unwanted when incidents involving failures or extreme atmospheric disturbances
occur. Moreover, the pilot’s response in such circumstances may not be reproducible
in simulators and unique to the incident. The research described in this thesis describes the
development of a pilot model suitable for the investigation of the effects of aeroelasticity on
manual control and the study of the resulting airframe loads. After a review of the state-ofthe-
art in pilot modelling an experimental approach involving desktop based pilot-in-the-loop
simulation was adopted together with an optimal control based control-theoretic pilot model.
The experiments allowed the investigation of manual control with a nonlinear flight control
system and the derivation of parameter bounds for single-input-single-output pilot models. It
was found that pilots could introduce variations of around 15 dB at the resonant frequency
of the open loop pilot-vehicle-system. Sensory models suitable for the simulation of spatial
disorientation effects were developed together with biomechanical models necessary to capture
biodynamic feedthrough effects. A detailed derivation and method for the application of the
modified optimal control pilot model, used to generate pilot control action, has also been shown
in the contexts of pilot-model-in-the-loop simulations of scenarios involving an aileron failure
and a gust encounter. It was found that manual control action particularly exacerbated horizontal
tailplane internal loads relative to the limit loads envelope. Although comparisons with
digital flight data recordings of an actual gust encounter showed a satisfactory reproduction and
highlighted the adverse affects of fuselage flexibility on manual control, it also pointed towards
the need for more incident data to validate such simulations.
|
2 |
Pilot modelling for airframe loads analysisLone, Mohammad Mudassir January 2013 (has links)
The development of large lightweight airframes has resulted in what used to be high frequency structural dynamics entering the low frequency range associated with an aircraft’s rigid body dynamics. This has led to the potential of adverse interactions between the aeroelastic effects and flight control, especially unwanted when incidents involving failures or extreme atmospheric disturbances occur. Moreover, the pilot’s response in such circumstances may not be reproducible in simulators and unique to the incident. The research described in this thesis describes the development of a pilot model suitable for the investigation of the effects of aeroelasticity on manual control and the study of the resulting airframe loads. After a review of the state-ofthe- art in pilot modelling an experimental approach involving desktop based pilot-in-the-loop simulation was adopted together with an optimal control based control-theoretic pilot model. The experiments allowed the investigation of manual control with a nonlinear flight control system and the derivation of parameter bounds for single-input-single-output pilot models. It was found that pilots could introduce variations of around 15 dB at the resonant frequency of the open loop pilot-vehicle-system. Sensory models suitable for the simulation of spatial disorientation effects were developed together with biomechanical models necessary to capture biodynamic feedthrough effects. A detailed derivation and method for the application of the modified optimal control pilot model, used to generate pilot control action, has also been shown in the contexts of pilot-model-in-the-loop simulations of scenarios involving an aileron failure and a gust encounter. It was found that manual control action particularly exacerbated horizontal tailplane internal loads relative to the limit loads envelope. Although comparisons with digital flight data recordings of an actual gust encounter showed a satisfactory reproduction and highlighted the adverse affects of fuselage flexibility on manual control, it also pointed towards the need for more incident data to validate such simulations.
|
3 |
Pilot-induced oscillation detection and mitigationLiu, Qingling 12 1900 (has links)
Commercial Aircraft
Corporation of China, Ltd (COMAC)and Chinese Scholarship Council. / The aim of this thesis is to develop a real time PIO detection and mitigation system that
consists of a detector based on short time Fourier transform(STFT) and autoregressive
model(ARX) with exogenous inputs, together with an adaptive controller based mitigation
system. The system not only detects the traditional PIO characteristics but also focuses on
the trend of pilot behaviour by calculating the rate of change in the open loop crossover
frequency. In the detection system, a sliding windowed STFT method was applied to
identify the frequency and phase characteristics of the system via processing the signal of
pilot input and aircraft state. An ARX model was also applied to get the rate of change
of the crossover frequency. After detection, a PIO cue was shown on the primary flight
display. A scheduled gain controller was coupled to provide PIO mitigation by varying
stick input gain.
Compensatory and tracking tests for the evaluation of this system were performed using
a quasi-linear Boeing-747 aircraft model including nonlinear command gearing and actuator
rate-limiting. Bandwidth and Gibson criteria were used to design PIO prone control
laws for system evaluation experiments. Results from PIO tests conducted on desktop
PCs were presented. These were analyzed and compared with those obtained from implementing
the Real-time Oscillation Verifier module available in literature.
|
Page generated in 0.0822 seconds