Spelling suggestions: "subject:"pipe support"" "subject:"ripe support""
1 |
Improved pipe support design for the process industry to reduce mechanical loads on pumps / Vidareutveckling av rörstöd för processindustrin för att reducera mekaniska krafter på pumparPåhlsson, Carl January 2016 (has links)
This master thesis has been written to develop a new pipe support for pipe systems in the process industry. The purpose was to relieve pumps or other sensitive equipment from elevated forces or moments that may cause failure. The elevated forces or moments occur due to the weight of the piping, the weight of the medium and expansion due to elevated temperatures. The support is mainly designed to be implemented in a 90 degree bend but they can also be implemented in straight pipes with small adjustments of the attachment between the support and the pipe. Six different complete concepts were developed and put through different elimination matrices and evaluated against a requirement specification. The final design was calculated to withstand the forces and moments from a worst case scenario. The concept is in need of further development and testing before it can be implemented in projects. It is necessary to investigate if the clamps can withstand the working load in the new design. The concept should also be tested possibly by a prototype.
|
2 |
Pevnostní návrh potrubí / Strength design of pipeJahodová, Miroslava January 2015 (has links)
The subject of this thesis is strength design of pipe connecting furnace of continuous catalytic reforming with reactor. First is realize analytical design of individual parts according to ASME VIII, ČSN EN 12952-3 a ČSN EN 13480-3. It is also design and optimize supporting pipe using Caesar II. At the end of work is creating isometric documentation.
|
Page generated in 0.373 seconds