Thesis (doctoral)--Technische Universität Müunchen, 2004. / Includes bibliographical references (p. 135-155).

M.Ing. / This dissertation covers a literature survey of materials handling and plant layout in the steel fabrication environment. It covers some of the elements and principles of materials handling and how they interact with and influence the effective flow of materials in an operation. Some of the current materials handling methods and systems of a specific South African steel fabrication operation are then investigated. By using the information from the literature study, an evaluation is done on some of these handling methods and systems. The implementation of materials handling elements and principles is investigated in the form of a case study, by using methods proposed in the literature survey. This investigation identifies current materials handling problems in the steel fabrication environment. Recommendations are made that may aid the improvement of materials flow and production output in this particular steel fabrication operation.

Thesis: M.S., Massachusetts Institute of Technology, Sloan School of Management, 1980 / Includes bibliographical references. / by H. Lee Hales and Harvey Cooper Jones, Jr. / M.S. / M.S. Massachusetts Institute of Technology, Sloan School of Management

El texto completo de este trabajo no está disponible en el Repositorio Académico UPC por restricciones de la casa editorial donde ha sido publicado. / There is a high margin of informality in small- and medium-sized companies in the bakery sector because of their lack of focus and poor standardization of their activities. Bakery SMEs, the activities of which have not yet been standardized, usually perform activities inefficiently, unnecessarily extending production times. The current average productivity of Lima-based SMEs is 1.7, a figure that, when compared with countries in the Pacific Alliance, is low. In addition, currently no methodologies seek continuous process improvement. Therefore, a Lean Process Management model was established to reduce activities and times. As validation, a production time simulation was performed in a warehouse, increasing the productivity to 2.08, with a percentage variation of 87.39% when compared with the initial productivity.

Tenhults Pressgjuteri AB is facing growth in expansion, which results in need of bigger premises. The company has bought an adjoining property to overcome this problem. This thesis givessuggestions on how the logistics of these properties should be managed, which transport system is most suitable to use, where deliveries will take place and how the stock will be set upin the new premises. To obtain relevant data and information have a description of the facts, measurements and calculations been made. Selections and ratings have been used to develop suitable alternative solutions. The payback-method has been used to calculate the investments. A specially designed evaluation chart forms the basis of which transport system to be used. Lastly, a sensivity analysishas been conducted to determine how reliable the results are. Deliveries and inventory have been determined based on the choice of transport system.The thesis shows that the choice of transport system depends on the volumes that are carried, distance and environmental conditions. The market offers both automated transport systems and systems that require a driver. The automated transport system willnot be profitable whenthe cargo volume is too small since the investment costs are significantly higher. However, the operating costs are low which makes it profitable with an increased cargo volume. Closer analysis of existing production flow could provide a more credibleresult. What also must be taken into account is thatthe costs is not preciseand may differ in reality. The costs are assumed to be so lifelike that they do not affect the result more than marginally. / Tenhults Pressgjuteri AB befinner sig i en expansionsfasoch är i behov av större lokaler. För att lösa dettahar företaget köpt upp en grannfastighet. Denna rapport ger förslag på hur logistiken mellan dessa fastigheter skall skötas,vilket transportsystem som är lämpligt att använda, var utleveranserskall ske,samt ett förslag på hurlager kan ställas uppi den nya fabriken. För att erhålla relevant data och information har nulägesbeskrivningar, mätningar och beräkningar gjorts. Urval och värderingar har använts för att ta fram lämpliga alternativ på lösningar. För att beräkna investeringskostnader har payback-metoden använts och ett specialframtaget värderingsschema ligger som grund för valet av transportsystem. Slutligen har en känslighetsanalys gjorts för att bestämma hur pålitligt resultatet är. Utleverans och lager har bestämts utifrån valet av transportsystem för att synkronisera på bästa sätt. Arbetet visar att val av transportsystem beror påvilka volymer som fraktas, avstånd och miljöförhållanden. Marknaden erbjuder både automatiserade transportsystem och system som kräver chaufför. I detta fall är fraktvolymen för litenför att ett automatiserat system skall vara lönsamt eftersominvesteringskostnaderna för ett sådant system är betydligt högre. Däremot är driftkostnaderna lågaför ett automatiserat systemoch vid en större fraktvolym sparas dessa driftkostnaderin då ingen bemanningskostnad tillkommer.Närmare undersökning av befintligt produktionsflöde kunde ge ett mer trovärdigt resultat då arbetet baseras på beräkningar från olika portar. Det som också skall tas i beaktande är att kostnaderna inte är exakta och kan komma att avvika i verkligheten. Kostnaderna antas dock vara så verklighetstrogna att de inte påverkar resultatet mer än marginellt.

No description available.

Mémoire (M.P.M.O.)-- Université du Québec à Chicoutimi, 1993. / Document électronique également accessible en format PDF. CaQCU

With the ongoing technology battles and price wars in today's competitive economy, every company is looking for an advantage over its peers. A particular choice of facility layout can have a significant impact on the ability of a company to maintain lower operational expenses under uncertain economic conditions. It is known that systems with less congestion have lower operational costs. Traditionally, manufacturing facility layout problem methods aim at minimizing the total distance traveled, the material handling cost, or the time in the system (based on distance traveled at a specific speed). The proposed methodology solves the looped layout design problem for a looped layout manufacturing facility with a looped conveyor material handling system with shortcuts using a system performance metric, i.e. the work in process (WIP) on the conveyor and at the input stations to the conveyor, as a factor in the minimizing function for the facility layout optimization problem which is solved heuristically using a permutation genetic algorithm. The proposed methodology also presents the case for determining the shortcut locations across the conveyor simultaneously (while determining the layout of the stations around the loop) versus the traditional method which determines the shortcuts sequentially (after the layout of the stations has been determined). The proposed methodology also presents an analytical estimate for the work in process at the input stations to the closed looped conveyor. It is contended that the proposed methodology (using the WIP as a factor in the minimizing function for the facility layout while simultaneously solving for the shortcuts) will yield a facility layout which is less congested than a facility layout generated by the traditional methods (using the total distance traveled as a factor of the minimizing function for the facility layout while sequentially solving for the shortcuts). The proposed methodology is tested on a virtual 300mm Semiconductor Wafer Fabrication Facility with a looped conveyor material handling system with shortcuts. The results show that the facility layouts generated by the proposed methodology have significantly less congestion than facility layouts generated by traditional methods. The validation of the developed analytical estimate of the work in process at the input stations reveals that the proposed methodology works extremely well for systems with Markovian Arrival Processes.

No description available.

No description available.