Spelling suggestions: "subject:"1solates, iron anda steel."" "subject:"1solates, iron ando steel.""
1 |
DUCTILITY AND STRENGTH OF SINGLE PLATE CONNECTIONSGillett, Paul Edward January 1978 (has links)
No description available.
|
2 |
Triangular bracket plates without diagonal edge stiffenersSalmon, Charles G. January 1900 (has links)
Thesis (Ph. D.)--University of Wisconsin--Madison, 1961. / Typescript. Vita. eContent provider-neutral record in process. Description based on print version record. Includes bibliographical references.
|
3 |
Single plate connections for steel beamsWyss, Urs January 1967 (has links)
Single plate connections for steel beams, connected by high strength bolts to the beam web and welded to the column, were investigated to determine their, behaviour.
Tests were performed on the connections in the absence and in the presence of shear, and shear was found not to affect the rigidity of the connections.
Varying the gauge distance, the weld size, the pitch and the number of bolts in the test specimens, showed that only the pitch and the number of bolts influenced the rigidity of the connections. An increase in the pitch and the number of bolts causes an increase in the rigidity of the connections.
In all cases the major slip value was greater than the usually assumed value.
Under the action of pure moment the centre of rotation was found to be slightly above the centroid of the connection, whereas under the action of moment and shear the centre of rotation was slightly below the centroid of the connection.
The maximum moment developed by the connections varied from 45 kip-inches for the two-bolt connection, to 355 kip-inches for the six-bolt connection. / Applied Science, Faculty of / Civil Engineering, Department of / Graduate
|
4 |
The use of elastic finite elements in the design of reinforced concrete flat platesGentry, T. Russell 08 1900 (has links)
No description available.
|
5 |
GUSSET PLATE DESIGN UTILIZING BLOCK-SHEAR CONCEPTS.Hardash, Steve Gregory. January 1984 (has links)
No description available.
|
6 |
Metal dusting of iron and low alloy steelYin, Maggie Huaying, Materials Science & Engineering, Faculty of Science, UNSW January 2006 (has links)
Metal dusting is a kind of catastrophic corrosion phenomenon that can be observed in several of petrochemical processes. It occurs on iron-, nickel- and cobalt-base metals in carbonaceous atmospheres at high temperature when gaseous carbon activity is higher than one. The process is particularly rapid for ferritic alloys The aim of this project was to compare the dusting kinetics of pure iron and a 2.25Cr-1Mo alloy steel under CO-H2-H2O atmosphere at 650??C. Polished (3??m) samples of iron and the steel were exposed to flowing CO-H2-H2O gas atmospheres at 650??C, when the gases were supersaturated with respect to graphite. The partial pressure of CO was varied between 0.25 and 0.9 atm, and the carbon activity was varied from 2.35 to 16, in order to obtain a series of experimental conditions. In most experiments, pO2 was less than 7.37E-24 atm, and no iron oxide could form. However, Cr2O3 would always have been stable. When exposed to these gases, both iron and steel developed a surface scale of Fe3C which was buried beneath a deposit of carbon, containing iron-rich nanoparticles (the dust). Examination by Scanning Electron Microscopy allowed the observation of fine and coarse carbon nanotubes, and also spiral filaments. However, the morphology of the graphitic carbon was not sensitive to pCO and aC. Moreover, the carbon deposit was gas permeable, allowing continuing gas access to the underlying metal. At a fixed=4.5, the carburizing rate clearly increased with CO content from 0.25 to 0.68 atm. However, increasing the CO content to higher value led to decreased rates, indicating that carburizing rate reaches a maximum value at pCO=0.68 atm. When pCO was fixed at 0.25 atm and 0.68 atm, and carbon activity was varied. The induction period was extended by the formation of protective oxide layers at low values of carbon activity (aC= 2.35 and 2.55) where pO2 exceed the iron oxide formation value. For other reaction conditions, the carbon uptake rate for iron and steel did not increase with aC. The present work showed that the carbon deposition rates were not proportional to pCO or pCOpH2. Instead, the rate was affected by the partial pressure of all three reaction gases, and the carbon uptake rate for both materials could be expressed at r=k1pCOpH2+k2pCO2+k3pH22 and the rate constant k3 has a negative value, corresponding to coke gasification. From XRD analyses, it was found that cementite was the only iron-containing phase in the dusting product. The cementite particles acted as catalysts for carbon deposition from the gas. The same deposition process at the surface of the cementite layer led to its disintegration, thereby producing the particles. This disintegration process was faster on the steel than on pure iron. Consequently, the rates of both metal wastage and coke accumulation were faster for the steel. It is concluded that chromium and molybdenum do not stabilize the carbide but accelerate its disintegration process. It is suggested that Cr2O3 fine particles in the cementite layers provide more nucleation sites in the cementite layer on steel, explaining its more rapid dusting kinetics. However, appropriate methods of proving this assumption, such as TEM and FIB, are required.
|
7 |
Fulfilling customer orders for steel plates from existing inventory /Huegler, Peter A., January 2003 (has links)
Thesis (Ph. D.)--Lehigh University, 2003. / Includes vita. Includes bibliographical references (leaves 188-191).
|
8 |
Ductility of single plate framing connectionsCaccavale, Salvatore Erasmo, 1951- January 1975 (has links)
No description available.
|
9 |
Metal dusting of iron and low alloy steelYin, Maggie Huaying, Materials Science & Engineering, Faculty of Science, UNSW January 2006 (has links)
Metal dusting is a kind of catastrophic corrosion phenomenon that can be observed in several of petrochemical processes. It occurs on iron-, nickel- and cobalt-base metals in carbonaceous atmospheres at high temperature when gaseous carbon activity is higher than one. The process is particularly rapid for ferritic alloys The aim of this project was to compare the dusting kinetics of pure iron and a 2.25Cr-1Mo alloy steel under CO-H2-H2O atmosphere at 650??C. Polished (3??m) samples of iron and the steel were exposed to flowing CO-H2-H2O gas atmospheres at 650??C, when the gases were supersaturated with respect to graphite. The partial pressure of CO was varied between 0.25 and 0.9 atm, and the carbon activity was varied from 2.35 to 16, in order to obtain a series of experimental conditions. In most experiments, pO2 was less than 7.37E-24 atm, and no iron oxide could form. However, Cr2O3 would always have been stable. When exposed to these gases, both iron and steel developed a surface scale of Fe3C which was buried beneath a deposit of carbon, containing iron-rich nanoparticles (the dust). Examination by Scanning Electron Microscopy allowed the observation of fine and coarse carbon nanotubes, and also spiral filaments. However, the morphology of the graphitic carbon was not sensitive to pCO and aC. Moreover, the carbon deposit was gas permeable, allowing continuing gas access to the underlying metal. At a fixed=4.5, the carburizing rate clearly increased with CO content from 0.25 to 0.68 atm. However, increasing the CO content to higher value led to decreased rates, indicating that carburizing rate reaches a maximum value at pCO=0.68 atm. When pCO was fixed at 0.25 atm and 0.68 atm, and carbon activity was varied. The induction period was extended by the formation of protective oxide layers at low values of carbon activity (aC= 2.35 and 2.55) where pO2 exceed the iron oxide formation value. For other reaction conditions, the carbon uptake rate for iron and steel did not increase with aC. The present work showed that the carbon deposition rates were not proportional to pCO or pCOpH2. Instead, the rate was affected by the partial pressure of all three reaction gases, and the carbon uptake rate for both materials could be expressed at r=k1pCOpH2+k2pCO2+k3pH22 and the rate constant k3 has a negative value, corresponding to coke gasification. From XRD analyses, it was found that cementite was the only iron-containing phase in the dusting product. The cementite particles acted as catalysts for carbon deposition from the gas. The same deposition process at the surface of the cementite layer led to its disintegration, thereby producing the particles. This disintegration process was faster on the steel than on pure iron. Consequently, the rates of both metal wastage and coke accumulation were faster for the steel. It is concluded that chromium and molybdenum do not stabilize the carbide but accelerate its disintegration process. It is suggested that Cr2O3 fine particles in the cementite layers provide more nucleation sites in the cementite layer on steel, explaining its more rapid dusting kinetics. However, appropriate methods of proving this assumption, such as TEM and FIB, are required.
|
10 |
The static in-plane strength of welded steel plate I-girders under bending /Wei, Ber-Lin, January 1998 (has links)
Thesis (Ph. D.)--Lehigh University, 1999. / Includes vita. Includes bibliographical references (leaves [184-196]).
|
Page generated in 0.0614 seconds