No description available.

Orientador: Maria Isabel Felisberti / Tese (doutorado) - Universidade Estadual de Campinas, Instituto de Quimica / Made available in DSpace on 2018-08-05T05:18:11Z (GMT). No. of bitstreams: 1 Hanamoto_LilianSatomi_D.pdf: 13319819 bytes, checksum: 0e6b63b39a199cc970951da7436dd7f6 (MD5) Previous issue date: 2005 / Doutorado / Físico-Química / Doutor em Ciências

Polymers are added to asphalt binders primarily to stiffen the binder at higher temperatures and thus to protect the pavement against rutting at summertime temperatures early in the pavement's life. Also, it has been noted that polymers typically increase the ductility of a binder and that some polymer-asphalt combinations are especially effective. Furthermore, it is hypothesized that enhancing a binder's ductility, and maintaining this enhancement with binder oxidative aging, contributes to enhanced binder durability in pavements. However, polymer-asphalt interactions and how they might contribute to improved binder performance is not well understood. The goal of this work was to probe the relationship of polymer morphology on asphalt binder rheology and mixture durability. Experiments were conducted on asphalt mixtures and binders, and as a function of oxidative aging. PFC mixtures, which are an open mixture designed to allow enhanced water drainage, were of specific interest. These mixtures were tested for Cantabro Loss, an indicator of a mixture's likelihood of failure by raveling. Asphalt binders were tested using dynamic shear rheometry (DSR), which provided the DSR function, (G' /η'/G'), a measure of binder stiffness that includes both the elastic modulus and the flow viscosity), ductility (used to measure the elongation a binder could withstand before failure), gel permeation chromatography (GPC), used to estimate the relative amount of polymer) and fluorescence microscopy (used to image the polymer morphology in the asphalt binder). From these data, relationships were assessed between binder morphology and binder rheology and between binder rheology and mixture durability, all as a function of binder oxidative aging. Polymer morphology related to ductility enhancement. Polymer morphology related to a change in the DSR function, relative to the amount of polymer, as measured by the polymer GPC peak height. Cantabro loss correlated to the DSR function (R2=0.963). The overall conclusion is that polymer morphology, as indicated by fluorescence microscopy, relates to both the rheological properties of the binder and the Cantabro loss of the mixture. These relationships should yield a better understanding of polymer modification, increased mixture durability (decreased raveling) and improved rheological properties (DSR function and ductility).

Graft copolymers with a dendritic (arborescent) architecture and unimolecular micelle properties have been synthesized and examined for their solution properties as well as their ability to serve as templates for the preparation of metallic nanoparticles. The research focused on two types of arborescent copolymers, namely core-shell (CS) and core-shell-corona (CSC) architectures. Copolymer amphipolarity was provided by a hydrophobic polystyrene (PS) component and a polar poly(2-vinylpyridine), P2VP, phase. The CS copolymers were obtained by grafting P2VP onto linear or branched PS substrates to yield PS-g-P2VP unimolecular micelles. These copolymers exhibited solubility with limited aggregation in aqueous environments after protonation with HCl. Coordination of the coronal P2VP phase with HAuCl4 was achieved, and the resulting polymer-stabilized metallic nanoparticles had a spherical morphology. The tri-layered copolymers were synthesized in similar fashion, by grafting PS-b-P2VP block copolymers onto linear or branched PS substrates to afford a CSC morphology with a PS core, a P2VP inner shell, and a PS corona. While the grafting reaction proceeded with lower than expected grafting yields as compared to grafting reactions of homopolymer side-chains, significant P2VP content and molecular weight increases were achieved. It was determined that aggregation of the block copolymer side-chains hindered the coupling reaction of the reactive centers with the substrate. After purification of the PS-g-(P2VP-b-PS) arborescent copolymers, in part by developing a cloud-point centrifugation purification technique, the spherical copolymers were successfully loaded with various metallic compounds. The uptake of compounds such as HAuCl4 by the P2VP phase of the copolymers induced intramolecular phase segregation for copolymers of generations (G) 2 and above. Phase segregation produced some unique and intricate morphologies different from the ones observed previously for other unimolecular metal scaffolds. Intramolecular toroidal, nodular, and cylindrical morphologies were observed for the G2, G3, and G4 arborescent copolymers, respectively. Templates of generations 0 and 1 displayed a spherical morphology similar to their PS-b-P2VP intermolecular micelle analogues when loaded with metals. Phase segregation is believed to be mediated mainly by the characteristics of the PS core, the length of the P2VP segments having less influence on the morphologies obtained. Reduction of the metallic salts was performed using various agents and protocols. Stronger reducing agents yielded smaller and more narrowly distributed gold nanoparticles, while other reduction methods also removing the polymer scaffold resulted in larger nanoparticles.

Graft copolymers with a dendritic (arborescent) architecture and unimolecular micelle properties have been synthesized and examined for their solution properties as well as their ability to serve as templates for the preparation of metallic nanoparticles. The research focused on two types of arborescent copolymers, namely core-shell (CS) and core-shell-corona (CSC) architectures. Copolymer amphipolarity was provided by a hydrophobic polystyrene (PS) component and a polar poly(2-vinylpyridine), P2VP, phase. The CS copolymers were obtained by grafting P2VP onto linear or branched PS substrates to yield PS-g-P2VP unimolecular micelles. These copolymers exhibited solubility with limited aggregation in aqueous environments after protonation with HCl. Coordination of the coronal P2VP phase with HAuCl4 was achieved, and the resulting polymer-stabilized metallic nanoparticles had a spherical morphology. The tri-layered copolymers were synthesized in similar fashion, by grafting PS-b-P2VP block copolymers onto linear or branched PS substrates to afford a CSC morphology with a PS core, a P2VP inner shell, and a PS corona. While the grafting reaction proceeded with lower than expected grafting yields as compared to grafting reactions of homopolymer side-chains, significant P2VP content and molecular weight increases were achieved. It was determined that aggregation of the block copolymer side-chains hindered the coupling reaction of the reactive centers with the substrate. After purification of the PS-g-(P2VP-b-PS) arborescent copolymers, in part by developing a cloud-point centrifugation purification technique, the spherical copolymers were successfully loaded with various metallic compounds. The uptake of compounds such as HAuCl4 by the P2VP phase of the copolymers induced intramolecular phase segregation for copolymers of generations (G) 2 and above. Phase segregation produced some unique and intricate morphologies different from the ones observed previously for other unimolecular metal scaffolds. Intramolecular toroidal, nodular, and cylindrical morphologies were observed for the G2, G3, and G4 arborescent copolymers, respectively. Templates of generations 0 and 1 displayed a spherical morphology similar to their PS-b-P2VP intermolecular micelle analogues when loaded with metals. Phase segregation is believed to be mediated mainly by the characteristics of the PS core, the length of the P2VP segments having less influence on the morphologies obtained. Reduction of the metallic salts was performed using various agents and protocols. Stronger reducing agents yielded smaller and more narrowly distributed gold nanoparticles, while other reduction methods also removing the polymer scaffold resulted in larger nanoparticles.

It is well established that the morphology and physical properties of an organic semiconducting (OSC) material regulate its electronic properties. However, structure-function relationships remain difficult to describe in polymer-based OSC, which are of particular interest due to their robust mechanical properties. If relationships among the molecular and bulk levels of structure can be found, they can aid in the design of improved materials. To explore and detail important structure-function relationships in polymer-based OSC, this work employs molecular dynamics (MD) simulations to study various π-conjugated polymers in different environments. Two independent investigations are discussed in this work. One investigation examines how the purposeful disruption of the π-conjugated backbone to increase the chain flexibility impacts the chain structure and packing in the condensed phase. This is done by adding a conjugation break spacer (CBS) unit of one to ten carbons in length into the monomer structure of diketopyrrolopyrrole-based polymers. It is found that trends in the folding and glass structure follow the increase and the parity (odd versus even) of the CBS length. The second investigation analyzes a variety of polymers and small molecule acceptor (SMA) blends to observe the effects of changing the shape of either component and the physical properties of the material, as well as the structure of the polymer chains. It is found that the conjugated core, the side chains, and the planarity or sphericity each influence the density and diffusion of the materials made.

This work investigates the influence of microstructure and cooling and heating rates on the physical and chemical properties of fast crystallizing polymers. The primary objectives were to 1) utilize advanced methodologies to accurately determine the fundamental thermodynamic value of equilibrium melting temperature (Tmo) for the semi-crystalline polymer poly(ether ketone ketone) (PEKK), 2) increase understanding of the influence of microstructure (random versus blocky) of functionalized semi-crystalline polymers on physical and chemical properties, and 3) understand the influence of additive manufacturing process parameters on semi-crystalline polymer crystallization and final properties. All objectives utilized the advanced characterization technique of fast scanning calorimetry (FSC) using the Mettler Toledo Flash DSC 1. The first half of this work focuses on the high-performance semi-crystalline aromatic polymer poly(ether ketone ketone) (PEKK) with a copolymerization ratio of terephthalate to isophthalate moieties (i.e., T/I ratio) of 80/20. Due to the fast heating and cooling rates of the Flash DSC, PEKK underwent melt-reorganization upon heating at slow heating rates. This discovery resulted in utilizing a Hoffman-Weeks linear extrapolation of the zero-entropy production temperature to establish a new equilibrium melting temperature of 382 oC. Additionally, a new NMR solvent, dichloroacetic acid, was discovered for PEKK, allowing for comprehensive NMR analysis of PEKK for the first time. Diphenyl acetone (DPA) was discovered as a novel, benign gelation solvent for PEKK, enabling heterogeneous gel-state bromination and sulfonation to afford blocky microstructures. The gel state functionalization process resulted in a blocky microstructure with runs of pristine crystallizable PEKK retained within the crystalline domains, and amorphous domains containing the functionalized PEKK monomers. The preservation of the pristine crystalline domains resulted in enhanced physical and chemical properties compared to the randomly functionalized analogs. Additionally, heterogeneous gel state functionalization of PEKK gels prepared from different solvents and gelation temperatures resulted in differences in crystallization behavior between blocky microstructures of the same degree of functionalization. This result demonstrates that the blocky microstructure can be tuned through controlling the starting gel morphology. The second half of this work focuses on understanding the influence of cooling and heating rates on the melting, crystal morphology, and crystallization kinetics on isotactic polypropylene (iPP), iPP-polyethylene copolymers (iPP-PE), and iPP/iPP-PE blends and using this information to gain understanding of how these polymers crystallize during the additive manufacturing processes of powder bed fusion (PBF) and material extrusion (MatEx). The crystallization kinetics of iPP, iPP-PE copolymers, and iPP/iPP-PE blends exhibited bimodal parabolic-like behavior attributed to crystallization of the mesomorphic crystal polymorph at low temperatures and the α-form crystal at high temperatures. Incorporation of non-crystallizable polyethylene fractions both covalently and blended as a secondary component, resulted in decreasing crystallization rates, inhibition of crystallization, and decreased crystallizability. Additionally, the non-isothermal crystallization behavior of these systems shows that the non-crystallizable fractions influence the crystal nucleation density and temperature at which polymorphic crystallization occurs. Utilizing in-situ IR thermography in the PBF system, the heating and cooling rates observed for a single-layer PBF print were used to mimic the PBF process by FSC. Partial melting in the printing process leads to self-seeding and increased crystallization onset temperatures upon cooling, which influences the final part melting morphology. Nucleation from surrounding powder and partially melted crystals greatly influences the crystallization kinetics and crystal morphology of the final part. Utilizing rheological experiments and process-relevant cooling rates observed in the MatEx process, the miscibility of iPP/iPP-PE blends influenced the nucleation behavior and crystallization rates, subsequently leading to differences in printed part properties. / Doctor of Philosophy / The crystalline morphology of semi-crystalline polymers depends on their microstructure and thermal history. The resultant crystalline morphology greatly affects the physical and chemical properties. In the first part of this work, the effect of microstructure on material properties is explored. Block copolymer microstructures consist of two or more blocks of distinct polymer segments covalently bonded to one another. This leads to self-organization of the components into unique structural order that would not be attainable if the polymer segments were randomly bonded together. This structural order enhances material properties; thus, block copolymers are advantageous for many applications. However, synthesis of block copolymers can be tedious and expensive. Thus, additional methodologies for block copolymer synthesis are desired. In this work blocky (i.e., statistically non-random) copolymers are synthesized through a facile post-polymerization functionalization method. These blocky copolymers result in enhanced physical and chemical properties compared to the randomly synthesized analogs. This work shows blocky functionalization of a new polymer under new post-polymerization conditions and expands upon the synthesis methodology for block copolymers. In the second part of this work, the effect of heating and cooling rates on the formation of crystals during additive manufacturing is explored. Additive manufacturing modalities of powder bed fusion and material extrusion consist of rapid heating and cooling processes, which can affect how crystals form and ultimately affect the final printed part properties. Using a technique called fast scanning calorimetry, the different heating and cooling rates that the polymer witnesses during printing can be mimicked, and the formation of crystals under these different conditions can be replicated. This mimicking analysis can be related to the printing process and be used to help guide printing processes to enhance printed part properties.