Spelling suggestions: "subject:"folymers - eynthesis."" "subject:"folymers - asynthesis.""
31 |
Polynuclear Coordination Assemblies : Synthesis, Crystal Structures And Magnetic BehaviorSengupta, Oindrila 11 1900 (has links) (PDF)
Construction of polynuclear metal assemblies from discrete 0D clusters to extend 3D networks, comprised of metal ions and bridging organic/inorganic ligands has attracted immense attention, owing to their intriguing network topologies and interesting properties. Proper ligand design and the appropriate choice of the metal center are of vital importance to the design of such polynuclear assemblies. One of the various attributes of polynuclear metal assemblies is magnetism. Magnetic materials can be constructed by incorporating magnetic moment carriers such as paramagnetic metals(V, Cr, Mn, Fe, Co, Ni, Cu) in presence of bridging ligands.
Though, one-atom oxo/hydroxo and two-atom cyanide bridges were of popular choices due to their short distance for transmitting strong magnetic coupling between the paramagnetic metal centers, it has been shown that, three-atom bridging ligands like carboxylate and azide (N3 ) are well-fitted moieties for this purpose since they offer a variety of magnetic interactions depending on their versatile bridging modes.
It has been well known that incorporation of anionic bridging ligand in presence of azide anion is a challenging task due to the competition between the 2nd anionic ligand with azide in self-assembly process. Incorporating both azide and carboxylate functionalities, a series of polymeric complexes has been synthesized and conversion of 0D discrete clusters to extended networks with the retention of basic core by fine tuning the ligands has been achieved.
Single-crystal to single-crystal transformation has received considerable attention in crystal engineering since it is difficult for crystals to retain single crystallinity after removal of the guest at high temperature. Interestingly single-crystal to single-crystal transformation was observed at high temperature for Co(II) formate-formamide complex and change in dimensionality from 3D to 0D was observed at high temperature for Cr(III) formate-formamide complex.
Multiferroic materials are those where both ferroelectricity and ferromagnetism coexist in the same phase. In general the transition metal d-electrons which are essential for magnetism reduce the tendency for off-center ferroelectric distortion. First tetrazole based miltiferroic coordination polymer of Co(II) metal ion in presence of azide has been successfully synthesized whereas its analogous Mn(II) complex showed different structural topology with interesting magnetic behavior. It has been also established in the present study, the important role played by hydrazine ligand to prevent oxidation of paramagnetic Co(II) to diamagnetic Co(III) system with the formation of a metal-inorganic assembly of Co(II) which exhibited spin-canted behavior.
|
32 |
Molecularly Imprinted Polymers Based On Fluorescent And Template Binding Cross-LinkerChakraborty, Twarita 08 1900 (has links) (PDF)
The synthesis of materials with molecular recognition properties has become a topic of great technological and scientific interest. Molecular imprinting is one of the most effective strategies in preparing highly selective synthetic receptors. The technique of molecular imprinting involves the copolymerization of functional and cross-linking monomers in the presence of a molecular template. Following polymerization and subsequent removal of the template, the molecularly imprinted polymer (MIP) retains a “molecular memory” of the template. During rebinding, the resultant polymer shows higher affinity and selectivity towards the molecular template when compared to other structural analogs. Ease of preparation and high thermal and chemical stability of this class of materials offers a broad range of potential applications. Promising areas of application include separation, chromatography, catalysis, sensors, antibody mimics, and drug delivery etc.
The thesis entitled “Molecularly Imprinted Polymers based on Fluorescent and Template binding Cross-linker” deals with the design and synthesis of several molecularly imprinted polymers (MIPs) using different functional and cross-linking monomers, the main focus being use of preformed template-monomer complex, use of fluorescent cross-linker and development of functional group containing cross-linker.
Chapter 1: An Introduction to Molecularly Imprinted Polymers.
The first chapter provides an introduction to the field of molecularly imprinted polymers. It presents an overview of molecular imprinting process including a brief history of its discovery and its evolution to the present form. This chapter further elaborates on the principle of molecular imprinting with an emphasis on different parameters that directly affect their performance. It also provides a brief review of the applications of molecularly imprinted polymers.
Chapter 2: Highly Cross-linked Metal Ion Imprinted Polymers.
The second chapter deals with the synthesis of series of highly cross-linked metal-ion imprinted polymers. The process of metal ion-imprinting usually involves carrying out the polymerization and cross-linking directly in presence of the appropriate metal ion. In the present study, chemical-immobilization method was adopted which involves the use of preformed metal complexes with polymerizable group for the imprinting. Acrylate complexes of various metal-ions, such as Cu2+, Zn2+, Co2+, Ni2+, Pb2+ and Cr3+, were synthesized prior to polymerization. These pre-assembled complexes were then used to prepare MIPs, in the anticipation that this would lead to enhanced selectivity. Ethyleneglycol dimethacrylate (EGDMA) was used as the cross-linking monomer. As a control, the respective non-imprinted polymers (NIPs) were also made in absence of the template metal ion. Following polymerization, the template metal ion was extracted from the resultant metal ion-imprinted polymer. The selectivity of the metal ion-imprinted polymers was examined by a batch process using analytical tools, such as, Atomic Absorption Spectroscopy (AAS) and Inductively Coupled Plasma Spectroscopy (ICP). The spectroscopic studies revealed significant selectivity of all the MIPs towards the template metal ion. Among all six metal ion-imprinted polymers, Pb2+ and Cr3+ ion-imprinted polymer showed remarkable selectivity, followed by Cu2+ and Zn2+ ion-imprinted polymers. The Co2+ and Ni2+ ion-imprinted polymers exhibited comparatively poor selectivity. Representative plots depicting the selectivity exhibited by Pb2+ and Cr3+ ion-imprinted polymers are shown in Figure 1. These observations were rationalized based on the size and geometric preferences imposed by the imprinted site on the ion that binds to it.
Figure 1. Selectivity study for (a) Pb2+ ion-imprinted polymer, (b) Cr3+ ion-imprinted polymer.
Chapter 3. Molecularly Imprinted Fluorescent Chemosensor for Copper (II).
Cu(II) is a source of important pollutant and therefore, the development of sensors that can detect Cu(II) selectively as well as remove Cu(II) from contaminated samples is an important objective. The use of molecular imprinting technique is an appealing approach in this regard. For this, a fluorophore containing cross-linker, namely 9,10-bis-(acryloyloxymethyl)anthracene (BAMA) was synthesized. This fluorescent cross-linker was used along with the standard cross-linker, EGDMA, for preparing Cu2+ ion-imprinted polymer. The complex of copper methacrylate (Cu-MAA) was prepared prior to polymerization used for the preparation of MIP. The resultant imprinted polymer exhibited quenching of the fluorescence in presence of Cu2+ ion, both in organic and aqueous medium. The efficiency of quenching of NIP (prepared in absence of Cu2+ ion) was significantly lower than that of MIP. A typical stack spectra showing the quenching process, along with a comparison of the quenching efficiency of MIP and NIP is shown in Figure 2.
The imprinted polymers showed significant selectivity over other non-template metal ions, thereby reaffirming the importance of the imprinting process. The sensitivity of the fluorescence detection could be enhanced by increasing the level of the fluorophore incorporation. The increased sensitivity in detecting Cu2+ ion, demonstrated by the MIP suggests that a statistically random incorporation of the fluorophore into MIP matrices could be a useful approach for imparting a sensing element to MIPs.
Figure 2. Fluorescence spectra of the (a) imprinted (MIP-1) and (b) non-imprinted (NIP-1) polymers in the presence of various concentration of Cu(OAc)2 in methanol. (c) Comparison of quenching efficiency of MIP-1 and NIP-1. Data were collected 3 h after addition of copper solution. I0 and I are the fluorescence intensities at 399 nm of the polymers in the absence presence of copper respectively. Two individual runs are presented in (c).
Chapter 4. Molecularly Imprinted Turn-Off-On Sensor.
This chapter describes the design and synthesis of molecularly imprinted fluorescent turn-off-on sensor utilizing the same fluorescent cross-linker, BAMA. Combining the process of fluorescence resonance energy transfer (FRET) with molecular imprinting technique, a novel turn-off-on sensor was developed. A molecularly imprinted polymer was prepared using a fluorescent template Coumarin-30 (C-30). C-30 was chosen as the template to ensure a significant overlap of the emission spectra of BAMA and the absorption spectra of C-30, thereby optimizing for FRET.
Figure 3. Structures of relevant molecules.
The C-30 imprinted polymer exhibited simultaneous quenching in fluorescence (turn-off) of BAMA and enhancement in fluorescence (turn-on) of C-30 (Figure 4). The imprinted polymer showed significantly better performance over the non-imprinted polymer (NIP).
Figure 4. Fluorescence spectra of the (a) imprinted (MIP) and (b) non-imprinted (NIP) polymers with increasing concentration of the template Coumarine-30 in methanol.
The UV-vis studies revealed that the more effective quenching is indeed due to the affinity for C-30 exhibited by the higher binding imprinted polymer. The imprinted polymer also showed significant selectivity over structurally analogous molecules. Therefore, both high sensitivity and selectivity were realized in such novel off-on sensor. Extension of this concept to other biologically relevant fluorescent templates could lead to potentially useful applications.
Chapter 5. Design of New Template Binding Cross-linker.
In molecularly imprinted polymers (MIP), high cross-linking density (~80 to 90 mole percent) is essential to ensure high selectivity, which limits the functional (binding) monomer to about 10-20 mole percent. Methacrylic acid (MAA) and ethyleneglycol dimethacrylate (EGDMA) are the most common combination of functional monomer and cross-linker, respectively, used in molecular imprinting. Generally a molecularly imprinted polymer made with this combination, contains only 10-20% binding sites. This limitation of binding site density is an aspect that has largely been overlooked. In order to improve the efficiency of MIP materials by enhancing the number of binding sites, a new cross-linking monomer (CYDI, 1) with two carboxylic acid groups was designed and synthesized by coupling itaconic anhydride with cyclohexane dimethanol (Figure 5).
Figure 5. Structures of relevant molecules. The new functional group bearing cross-linking monomer (1) Itaconate ester of cyclohexanedimethanol (CYDI), the template (2) theophylline (Theop) and the structural analogue of template (3) caffeine (Caff).
This new cross-linking monomer was then employed for preparing molecularly imprinted polymer using a drug molecule, theophylline (Theop 2, a bronchodilator) as the template. Seven molecularly imprinted polymers were synthesized with different ratios of CYDI and EGDMA, keeping the cross-linking density constant. The binding efficiency and the selectivity of these imprinted polymers were thoroughly investigated. It was seen that while saturation binding values for theophylline increased continuously with functional cross-linker (CYDI) content, the optimum selectivity with respect to analogous substrate, caffeine, was attained at 40 mol% CYDI. These studies suggest that the approach of using functional group containing cross-linkers could lead to improved MIP performance.
|
33 |
Design And Synthesis Of Donor-Acceptor (D-A) Organic Semiconductors : Applications In Field Effect Transistors And PhotovoltaicsDutta, Gitish Kishor 06 1900 (has links) (PDF)
The present thesis is focused on rational design and synthesis of π-conjugated donor-acceptor (D-A) type oligomers and polymers. It is organized in six different chapters and a brief discussion on the content of the individual chapter is provided below.
Chapter 1 briefly describes the charge transport properties of organic semiconductors followed by recent development of different organic semiconducting materials mainly for applications in OFET and solar cells have been highlighted.
Chapter 2 explores the synthesis and characterization of two new liquid crystalline, D-A type bithiophene-benzothiazole derivatives. The liquid crystalline properties of the materials have been studied in detail with optical polarizing microscopic images and differential scanning calorimetry and found that these materials possess highly ordered smectic A liquid crystalline phase. Their charge transport properties have also been investigated by fabricating OFET devices.
Chapter 3 describes the photophysical properties and OFET performance of quinoxaline based donors-acceptor-donor (D-A-D) type molecules. Depending on the flexibility and rigidity of the conjugated backbone these materials show liquid crystalline behaviour. Investigation of their OFET performance indicated that these molecules exhibit p-type mobility up to 9.7 x 10-4 cm2V-1s-1 and on/ off ratio of 104.
Chapter 4 investigates excited state properties and OFET behavior of D-A-D type diketopyrrolopyrrole (DPP) derivatives end-capped with alkoxynaphthalene group. UV-Visible spectroscopy measurement shows strong intramolecular charge transfer (ICT) between donor and acceptor unit. Steady-state and time-resolved fluorescence measurements confirm the formation of excimer. The excited state interactions, the interchromophore separation and geometry of the molecules influence the extent of excimer formation. Finally, the OFET behavior of these DPP based materials has been studied using different dielectric layers.
Chapter 5 discusses the synthesis, characterization and properties of two new thieno[3,2-b]thiophene-DPP based donor-acceptor (D-A) type low band gap polymers (PTTDPP-BDT and PTTDPP-BZT). Investigation of OFET performance indicated that polymers exhibited ambipolar behaviour with hole mobility upto 1.0 x 10-3 cm2/Vs and electron mobility upto 8 x 10-5 cm2/Vs. Using polymer PTTDPP-BDT with electron acceptor C70PCBM, power conversion efficiency (PCE) around 3.26% in bulk heterojunction solar cell has been achieved.
Chapter 6 describes the approach to tailor the energy levels of conjugated polymers (PTDPP-IDT and PTTDPP-IDT) based on Indacenodithiophene (IDT) coupled with DPP moieties. We have studied the photovoltaic performance of these conjugated polymers by blending with PCBM and P3HT. The importance of these materials in polymer/polymer blend solar cell has been emphasized. The photovoltaic devices with polymer/polymer blend solar cell exhibit high open-circuit voltages (VOC) of ~ 0.8 V.
In summary, the work presented in this thesis describes synthesis, characterization and photophysical properties of new organic semiconductors and their importance in optoelectronic devices. This work also describes a general design principle of nonfullerene organic solar cell. The results described here show that these materials have potential application as active components in plastic electronics.
|
34 |
Rational Design of Diketopyrrolopyrrole-Based Conjugated Polymers for Ambipolar Charge TransportKanimozhi, K Catherine January 2013 (has links) (PDF)
The present thesis is focused on the rational design of Diketopyrrolopyrrole based π- conjugated polymers for organic electronics. The thesis is organized into six different chapters and a brief description of the individual chapters is provided below.
Chapter 1 briefly describes the physics governing the electronic processes occurring in organic photovoltaics (OPVs) and organic field-effect transistors (OFETs) followed by design rules for the synthesis of conjugated polymers for organic electronics. Diketopyrrolopyrrole (DPP) based π-conjugated materials and their development in OPVs and OFETs have been highlighted.
Chapter 2 discusses the synthesis and characterization of a series of small molecules of DPP derivatives attached with different alkyl chains. Influence of side chains on the photophysical properties of these DPP derivatives have been studied by UV-visible spectroscopy and DFT calculations. Crystal structure studies revealed the effect of alkyl chains on the torsional angle, crystal packing, and intermolecular interactions such as π-π stacking.
Chapter 3 reports the synthesis of novel diketopyrrolopyrrole-diketopyrrolopyrrole (DPPDPP) based conjugated copolymers and their application in high mobility organic field-effect transistors. Effect of insulating alkyl chains on polymer thin film morphology, lamellar packing and π-π stacking interactions have been studied in detail. Investigation of OFET performance of these DPP-DPP copolymers with branched alkyl chains (N-CS2DPP-ODEH) resulted in low charge carrier mobilities as compared to the polymers (N-CS2DPP-ODHE) with linear alkyl chains. Polymer with triethylene glycol side chains (N-CS2DPP-ODTEG) exhibited a high field-effect electron mobility value of ~3 cm2V-1s-1 with a very low threshold voltage of ~2 V.
Chapter 4 investigates the effect of torsional angle on the intermolecular interactions and charge transport properties of diketopyrrolopyrrole (DPP) based polymers (PPDPP-OD-HE and PPDPP-OD-TEG). Grazing incidence x-ray diffraction studies shows the different orientation of the polymer crystallites and lamellar packing involved in polymer thin films. Investigation of OFETs evidenced the effect of torsional angle on the charge transport properties where the polymer with higher torsional angle PPDPP-OD-TEG resulted in high threshold voltage with less charge carrier mobility compared to the polymer with lower torsional angle (N-CS2DPP-OD-TEG).
Chapter 5 investigates the effect of photoactive material morphology on the solar cell device performance, and charge transfer kinetics by adding high boiling point processing additives. DPP based donor-acceptor (D-A) type low band gap polymers (PTDPPQ and PPDPPQ) have been synthesized and employed in bulk-heterojunction (BHJ) solar cells with the acceptor PC71BM. Addition of processing additive 1,8-diiodooctane (DIO) resulted in three order improvements in power conversion efficiency (PCE).
Chapter 6 describes the design and synthesis of two diketopyrrolopyrrole based copolymers (PPDPP-BBT and PTDPP-BBT) for their application in organic devices such as field-effect transistors and bulk-heterojunction solar cells. Investigation of OFET performance of these DPP based copolymers displayed hole mobilities in the order of 10-3 cm2V-1s-1. The semiconductor-dielectric interface has been characterized by capacitance-voltage, and Raman scattering methods.
In summary, the work presented in this thesis describes the synthesis and characterization of diketopyrrolopyrrole based new polymeric semiconductors. Effects of insulating side chains and torsional angle on the charge transport properties of these polymers in OFETs have been investigated. This work also describes the effect of solvent additives on the active layer morphology and BHJ solar cell device performance. The results described here show that these materials have potential application as active components in plastic electronics.
|
Page generated in 0.0396 seconds