No description available.

Not available / text

Although the synthesis of polymers with highly controlled molecular architectures has gained increased importance due to the rising demand for specialty polymers that possess novel properties, their physical characteristics are direct consequences of the size and constitution of the covalent structures of the polymer. Our program aims to prepare and characterize polymers, whose structures and properties are determined by non-covalent interactions. These novel polymer architectures are comprised of macrocycles threaded by linear macromolecules and are called polyrotaxanes. Polyrotaxanes are considered to be physical analogs of block or graft copolymers or molecular interpenetrating systems. The design and synthesis of the macrocyclic component, "blocking groups" to constrain the macrocycles and the polyrotaxane will be described. / Ph. D.

Polyrotaxanes are novel polymer architectures consisting of theo components. One component is the macrocycel consisting of 24-60 atoms; it is threaded by he second component, i.e., the linear backbone polymer. / Ph. D.

Rotaxane chemistry provides a new direction of research in polymer architectures. Unlike conventional polymers, polyrotaxanes are molecular composites comprised of macrocycles threaded by linear polymer backbones with no covalent bonds between the two components. This novel class of materials displays unusual chemical and physical properties due to their unique architectures. The studies include crown ether and blocking group syntheses, synthetic methodologies leading to rotaxanes and polyrotaxanes and structure-property relationships of polyrotaxanes. Crown ethers (30-crown-10, 36-crown-12, 42-crown-14, 48-crown-16 and 60-crown-20) were systematically synthesized from low molecular weight glycols with 30 - 60% yields. Bis(p-phenylene)-32-crown-4 and bis(p-phenylene)-34-crown-10 (BPP34C10) were also synthesized in 8 - 13% yields; the latter was synthesized with four different synthetic routes. All crown ethers were prepared in large quantities. A series of monofunctionalized triaryl derivatives were also synthesized as rotaxane blocking groups. A series of polyrotaxanes comprised of a polyurethane backbone and crown ethers with ring size ranging from 36 - 60 membered were synthesized via the statistical threading method. The polyrotaxane formation was proven by multiple reprecipitations, ¹H-NMR and GPC analyses. The threading efficiency (rings per repeat unit) increases from 0.16 to 0.87 with an increase in ring size of crown ethers from 36 to 60 membered at 1.5 molar ratio of crown ether to linear glycol. Host-guest complexation of paraquat dication and BPP34C10 has been studied. A series of difunctionalized paraquat dication derivatives was synthesized and used to prepare host-guest complexes (pseudorotaxanes) with BPP34C10. X-Ray crystal structures of the complexes were determined. Furthermore, a class of viologen-containing polyurethane elastomeric polyrotaxanes was synthesized via this host guest complexation. The threading efficiencies from this method were quantitative. Through rotaxane formation, polymer solubilities increase and glass transition temperatures decrease. Evidenced by DSC and WAXS analyses, the crown ether forms crystalline domains without dethreading from the amorphous polyurethane backbone. This process is kinetically "retarded". It is time and temperature dependent and reversible. It can only be observed for polyrotaxanes with large rings and high ring contents, which provide high mobilities of rings along the backbone and also wide T_m - T_g windows. The study of recrystallization kinetics has also shown that 60-crown-20 recrystallizes much slower in a polyrotaxane than in its physical blend with the model polymer. / Ph. D.

The generalized Langevin equation (GLE) has been used to describe the dynamics of particles in a stationary environment. To better understand the dynamics of polymerization, the GLE has been generalized to the irreversible generalized Langevin equation (iGLE) so as to incorporate the non-stationary response of the solvent. This non-stationary response is manifested in the friction kernel and the behavior of the projected (stochastic) force. A particular polymerizing system, such as living polymerization, is specified both through the parameters of the friction kernel and the potential of mean force (PMF). Equilibrium properties such as extent of polymerization have been obtained and are consistent with Flory-Huggin¡¯s theory. In addition, time-dependent non-equilibrium observables such as polymer length, the polymer length distribution, and polydispersity index (PDI) of living polymerization have been obtained. These have been compared to several experiments so as to validate the models, and to provide additional insight into the thermodynamic and kinetic properties of these systems. In addition to the iGLE, a stochastic model has been used to study the effect of nonequilibrium reactivity on living polymerization. This model can be used to determine whether the reaction is controlled by kinetics or diffusion. A combination of the iGLE and stochastic models may help us obtain more information about living polymerization.

No description available.

The thesis describes the study of structure and dynamics of polymers in confined geometry. We study the finite size effect on the dynamics of non glassy and glassy polymers. Systematic measurement have been performed to address the issue of the possibility of entanglement and hence reptation dynamics of the polymer segments in confinement. The confinement effect on the glassy dynamics has been studied for Langmuir monolayers as well as for polymer nanoparticle hybrid systems. Slow and heterogeneous dynamics are the underlined observed behavior for dynamics in hybrid systems. The available theories explains the slowing down of the dynamics as the system is cooled from the liquid state in terms of increasing cooperative motion of the molecules. The size of the cooperative region is predicted to grow with reducing temperature. Experiments, theories and simulation in confined dimensions have been motivated to detect this length scale of the cooperatively rearranging region. The surface and interface effects on glass transition were studied using measurements based on modulated differential scanning calorimetry and small angle X ray scattering techniques. The dynamical heterogeneity in glassy polymers were studied using advanced X ray photon correlation spectroscopy techniques. Our studies presented in this thesis are also an small step to contribute to the existing experimental results on studying the surface, interface and finite size effects on the morphology and dynamics of confined systems. These effects were studied for, firstly ultra thin Langmuir monolayers and secondly polymer nanoparticle hybrid systems. In Chapter 1, we provide the theoretical background along with brief review of the literature for understanding the results presented in this thesis. The details of the experimental set up and their operating principle along with the details of the experimental conditions are provided in Chapter 2. In Chapter 3 we presents our experimental results on surface morphology and surface dynamics in ultra thin Langmuir monolayer of polymers. Chapter 4 and Chapter 5 discusses the result based on polymer nanoparticle hybrid systems. We provide the summary of our result and the future prospective of the work in Chapter 6. In appendix we have shown the complete derivation of the equation used in Chapter 3 for understanding the surface morphology of Langmuir monoalyers on water surface. Chapter 1 provides in detail the introduction to several aspects related with the dynamics of both glassy and non glassy polymers in confinement. It starts with brief introduction to structure and dynamics of polymers in bulk. In the next section we discuss the macroscopic viscoelastic behavior of materials followed by a very brief discussion on the common techniques used for such measurement. Further it discusses the theory and several available models present in literature to understand the dynamics of glass transition. This section is followed by discussion on surface and interface effects on structure and dynamics of such systems in confinement. Towards the end of this chapter we discuss the universal behavior of slow dynamic observed in soft glassy materials. Chapter 2 contains the details of the experimental techniques which has been used for the study. Brief introduction to basic principles of the measurements followed by details of the material and methods have been provided. The surface morphology and dynamics of Langmuir monolayer of polymers confined at air water interface, under compressive mechanical strain has been discussed in Chapter 3. The results presented for surface morphology are based on the studies using the combination of in situ grazing angle incidence small angle X ray scattering and ex situ atomic force microscopy measurements on monolayers transfered on silicon substrate. The issue of the presence of reptation motion in confinement has been addressed by performing systematic measurements as a function of surface concentration and molecular weight at fixed temperature. The glassy dynamical behavior has been studied on different glassy polymer layer as a function of surface concentration and temperature. In Chapter 4 we show the glass transition behavior of polymer nanoparticle (PMMA gold) hybrid system based on thermal measurements. This chapter discusses the role of the existence of a length scale in deciding the dynamics of the glass transition temperature of polymers. The confinement effect was tuned by the variation of the inter particle spacing between the nanoparticles in the polymer matrix. It also discusses the model to understand the observed behavior of the glass transition temperature in terms of the tunability of the polymer particle interface and the effect of the interface morphology on the dynamics of glass transition temperature. Chapter 5 is about the study of dynamics of polymer nanocomposites near glass transition as a function of temperature, wave vector and volume fraction of gold nanoparticles using X ray photon correlation spectroscopy. Based on our experimental results , we provide a phase diagram for dynamics in 2D space of temperature, wave vector and volume fraction for our PMMA gold nanoparticle hybrid samples. Chapter 6 contains the summary and the future perspective of the work presented.

Indiana University-Purdue University Indianapolis (IUPUI) / Microspectrophotometry is a quick, accurate, and reproducible method to compare colored fibers for forensic purposes. The use of chemometric techniques applied to spectroscopic data can provide valuable discriminatory information especially when looking at a complex dataset. Differentiating a group of samples by employing chemometric analysis increases the evidential value of fiber comparisons by decreasing the probability of false association. The aims of this research were to (1) evaluate the chemometric procedure on a data set consisting of blue acrylic fibers and (2) accurately discriminate between yellow polyester fibers with the same dye composition but different dye loadings along with introducing a multivariate calibration approach to determine the dye concentration of fibers. In the first study, background subtracted and normalized visible spectra from eleven blue acrylic exemplars dyed with varying compositions of dyes were discriminated from one another using agglomerative hierarchical clustering (AHC), principal component analysis (PCA), and discriminant analysis (DA). AHC and PCA results agreed showing similar spectra clustering close to one another. DA analysis indicated a total classification accuracy of approximately 93% with only two of the eleven exemplars confused with one another. This was expected because two exemplars consisted of the same dye compositions. An external validation of the data set was performed and showed consistent results, which validated the model produced from the training set. In the second study, background subtracted and normalized visible spectra from ten yellow polyester exemplars dyed with different concentrations of the same dye ranging from 0.1-3.5% (w/w), were analyzed by the same techniques. Three classes of fibers with a classification accuracy of approximately 96% were found representing low, medium, and high dye loadings. Exemplars with similar dye loadings were able to be readily discriminated in some cases based on a classification accuracy of 90% or higher and a receiver operating characteristic area under the curve score of 0.9 or greater. Calibration curves based upon a proximity matrix of dye loadings between 0.1-0.75% (w/w) were developed that provided better accuracy and precision to that of a traditional approach.