Spelling suggestions: "subject:"folymers off intrinsic microporous"" "subject:"folymers oof intrinsic microporous""
1 |
Selective uptake and gas transport in chemically modified PIMsSatilmis, Bekir January 2015 (has links)
The research aimed to develop chemically modified PIM-1s for use in adsorption and gas separation processes. In particular, the nitrile group in PIM-1 was converted to several different functional groups to manipulate the interaction ability of PIM-1 with different species. Synthesis of PIM-1 was achieved by two different methods, using both the low (72h, 65 °C) and the high temperature (40 min, 160 °C) methods. Hydrolysis of PIM-1 was performed in the presence of 20% and 10% NaOH solutions (1:1 H2O/ethanol) at 120 and 100 °C, respectively. The reaction resulted in a mixture of hydrolysis products. The composition of the polymer has a profound effect on the final performance of the polymer. Powder samples of hydrolysed PIMs were used in the research. The reduction of nitrile to primary amine was achieved using borane dimethyl sulphide complex, resulting in amine PIM-1. Both membrane and powder forms of amine PIMs were studied. The reaction of PIM-1 with ethanolamine and diethanolamine produced hydroxyalkylaminoalkylamide PIMs. The combination of all available techniques (ATR-IR, solution and solid state NMR, TGA, Elemental analysis, UV, GPC, MALDI-ToF, low pressure N2 sorption) was used to characterise the polymers. Gas sorption studies of modified PIMs showed that the sorption capacities of polymer altered depend on the modification. Hydrolysed PIMs showed reduced CO2 uptake. Ethanolamine modified PIM showed reduced CO2 uptake along with even more reduced N2 uptake, leading to enhanced CO2/N2 ideal selectivity at 1 bar. Amine modification increased the CO2 uptake of the polymer, while showing the same N2 uptake. Enhanced sorption selectivity was also achieved by amine PIM-1. Although chemical modifications reduced the permeability of the membranes, enhanced gas selectivity was obtained. Enhanced H2/CO2 selectivity placed amine PIM-1 above the 2008 Robeson upper bound. The relationship between the degree of conversion and permeability of amine PIM-1 was studied in detail. The effect of temperature and pressure on the permeability of amine PIM was studied, using several different temperatures and pressures. Ethanolamine modified PIM showed size selective behaviour by enhanced H2/N2 and H2/CH4 selectivities, and it crossed the 2008 Robeson upper bounds. Dye adsorption studies revealed that chemical modification manipulated the interaction ability of PIM-1. PIM-1 showed high affinity for neutral dye. While hydrolysed PIMs showed high affinity for cationic species, amine and ethanolamine modified PIMs displayed high affinity for anionic dyes. The factors affecting the uptake capacity of PIM-1, including temperature and pH, were studied along with kinetics of dye adsorption. Thermal treatments of modified PIMs and their structural characterisation were performed. The adsorption and separation performances of thermally treated and untreated modified PIMs were compared.
|
2 |
Polymers of intrinsic microporosity and incorporation of graphene into PIM-1 for gas separationAlthumayri, Khalid Abdulmohsen M. January 2016 (has links)
Membrane-based gas separation processes are an area of interest owing to their high industrial demand for a wide range of applications, such as natural gas purification from CO2 or H2, and N2 or O2 separation from air. This thesis is focused on developing and investigating polymeric-based membranes. Firstly, novel mixed matrix membranes (MMMs) were prepared, incorporating few-layer graphene in the polymer of intrinsic microporosity PIM-1. Secondly, novel polyphenylene-based polymers of intrinsic microporosity (PP-PIMs) were synthesised. An optimum preparation method of graphene/PIM-1 MMMs (GPMMMs) was established from numbers of experiments. In this study, graphene exfoliation was a step towards GPMMM preparation. Starting from graphene exfoliation in chloroform, as a good solvent for PIM-1, enhancement in graphene dispersibility was obtained with addition of PIM-1. This result helped in GPMMM preparation with high graphene content (up to 4 wt.%). Characterizations techniques such as Raman spectroscopy and scanning electron microscopy (SEM) of GPMMMs, confirmed the few layer graphene content, with morphology changes in the polymeric matrix compared to pure PIM-1.Gas permeability results of GPMMMs showed an enhancement in permeability with low loading graphene (0.1 wt.%) using a relatively low permeability PIM-1 batch, due to high water content. However, less influence of graphene incorporation on permeability was observed with a highly permeable PIM-1 batch. Reduction in permeability over time, termed an ageing effect, is known for a polymer of high-free volume like PIM-1. However, the enhancement of GPMMMs permeability after eight months storage was shown to be retained. Novel PP-PIMs were prepared from novel precursors using a series known organic reactions. PP-PIMs were divided into two groups of polymers based on their polymerization reactions. A group of polymers were prepared from condensation polymerization between bis-catecol monomers and tetrafluoroterephthalonitrile (TFTPN). Another group of polymers were prepared from Diels Alder polymerization between monomers of terminal bisphenylacetylene groups and bis tetraphenylcyclopentadienones (TPCPDs). All of which yielded polymers with apparent BET surface area in the range 290-443 m2 g-1.
|
3 |
Preparation and properties of polybenzodioxane PIM-1 and its copolymers with poly(ethylene glycol)Laghari, Gul Mohammad January 2011 (has links)
This thesis describes the synthesis of soluble Polymer of Intrinsic Microporosity (PIM-1), fluoro-endcapped PIM-1 (F-PIM-1) and copolymers of F-PIM-1 with poly(ethylene glycol) monomethyl ether (MeOPEG). The main aim of the project was to alter the porosity of microporous PIM-1 in three ways: (a) synthesis of copolymers of F-PIM-1 with MeOPEG (b) blending of PIM-1 with MeOPEG in various proportions; and (c) adsorption of MeOPEG from aqueous solution byPIM-1. PIM-1 and F-PIM-1 were synthesized by step growth polymerization of tetrafluoroterephthalonitrile (TFTPN) with 5,5',6,6'-tetrahydroxy-3,3,3',3'-tetramethyl-1,1'-spirobisindane (THSB), using the conventional method and a newly reported high shear mixing method. F-PIM-1 oligomers were then coupled to poly(ethylene glycol) monomethyl ether (MeOPEG). The products were analyzed by NMR, IR, MALDI ToF MSS, TGA and polystyrene based GPC as well as multidetector GPC techniques. The high shear technique generally produced high molar mass products and yields. This method was also more successful for copolymerization.Blending of PIM-1 and MeOPEG in different proportions resulted in macrophase separation. Copolymer products were used to facilitate mixing of blends (as compatibilizers), however only 5% of MeOPEG could be solubilised into a PIM-1 phase. The effect of compatibilizer was found to be affected by interaction between PIM-1 and copolymer. However, N2 adsorption studies showed that after thermal removal of MeOPEG, PIM-1 regained stable porosity with significant BET surface area.Fluorescence studies were aimed at applications of PIM-1 and copolymers in sensors. PIM-1 and copolymers, spin-coated on the polyester-based substrate Melinex, were studied with and without methanol treatment in an environment of different solvent vapours. The effect of time and volume on wavelength shift and change in intensity was studied. Polar solvents tended to cause a red shift with decrease in intensity while less polar solvents behaved otherwise. Based on fluorescence experiments, solvent profiles for PIM-1 and copolymers were established.
|
4 |
Innovative gas separations for carbon capture : a molecular simulation studyLeay, Laura January 2013 (has links)
Adverse changes in the Earth's climate are thought to be due to the output of carbon dioxide from power stations. This has led to the development of many new materials to remove CO2 from these gas streams. Polymers of intrinsic microporosity (PIMs) are a novel class of polymers that are rigid with sites of contortion. These properties result in inefficient packing and so lead to large pore volumes and high surface areas. The inclusion of Tröger’s base, a contortion site made up of two nitrogen atoms, is thought to lead to increased uptake of CO2. The combination of electrostatic interactions with strong van der Waals forces should interact favourable with the quadrupole moment of CO2.Here a molecular simulation study of a selection of these polymers is presented. The study begins by developing a quick screening method on single polymer chains. This shows that the high surface area and adsorption affinity are a result of the contorted nature of PIMs along with the inclusion of groups such as Tröger’s base.The creation of atomistic models that reproduce the space packing ability of these polymers is also explored. Methods developed for PIMs in literature are investigated along with a new method developed during this study. GCMC simulations are then used to investigate the adsorption of CO2. In this study it is seen that that these polymers possess a well percolated network of both ultramicropores and supermicropores with a significant fraction of these pores being close to the kinetic diameter of CO 2. It is posited that these pores may be the result of the inclusion of Tröger’s base. It is also shown that this produces a particularly favourable site for adsorption. The phenomenon of swelling as a result of CO2 adsorption is also investigated using a variety of methods that make use of the output from the GCMC simulations. It was found that swelling is negligible for pressures of up to 1 bar. This result is important as swelling in the polymer can lead to a reduction in selectivity and an increase in permeability, which can affect the overall material’s performance.
|
5 |
Thermal Tuning of Ethylene/Ethane Selective Cavities of Intrinsically Microporous PolymersSalinas, Octavio 21 June 2016 (has links)
Ethylene is the most important organic molecule with regard to production volume. Therefore, the energy spent in its separation processes, based on old-fashioned distillation, takes approx. 33% of total operating costs. Membranes do not require significant thermal energy input; therefore, membrane processes may separate hydrocarbons cheaply and just as reliably as distillation columns. Olefin/paraffin separations are the future targets of commercial membrane applications, provided high-performing materials become available at reasonable prices.
This thesis addresses the development of advanced carbon molecular sieve (CMS) membranes derived from intrinsically microporous polymers (PIMs). Chronologically, Chapter 4 of this work reports the evaluation of PIMs as potential ethylene/ethane selective materials, while Chapters 5 to 7 propose PIMs as carbonization precursors. The gravimetric sorption studies conducted in this work regarding both the polymers and their heated-derivatives revealed that this separation is entirely controlled by diffusion differences.
The pristine polymers examined in this study presented BET surface areas from 80 to 720 m2g-1. Furthermore, the effect of using bromine-substituted PIM-polyimides elucidated a boost in ethylene permeability, but with a significant drop in selectivity. The hydroxyl functionalization of PIM-polyimides was confirmed as a valuable strategy to increase selectivity. Functionalized PMDA-HSBF is the most selective polyimide of intrinsic microporosity known to date (= 5.1) due to its hydrogen-bonded matrix. In spite of their novelty, pristine PIMs based on the spirobisindane moiety were not tight enough to distinguish between the 0.2 Å difference in diameter of the ethylene/ethane molecules. Therefore, they did not surpass the upper bound limit performance of known polymeric membranes. Nevertheless, the carbons derived from these polymers were excellent ethylene/ethane sieves by virtue of their narrow and tight pore distribution around the 3.6- 4.4 Å range.
PIM-based carbons were typically 10 times more permeable than their corresponding low free-volume analogues treated after the weight-loss of the sample reached a plateau. Furthermore, carbons derived from PIM-6FDA-OH and PIM-6FDA at 800 ºC were as ethylene separating efficient as their lower free-volume counterparts. The pore sintering mechanism that takes place above 600 ºC during the carbonization procedure of these films reduced the entropic freedom of the molecules, as was observed from separation factors of up to 25 under pure-gas conditions and 2 bar of pressure— The best performing CMS membranes reported to date for ethylene/ethane separation.
The mixed-gas separation of 1:1 binary ethylene/ethane mixtures revealed a significant decrease of the pure-gas measurements due to a carbon matrix dilation effect. This localized ultramicroporous dilation caused the ethane permeation rate to increase monotonically as the pressure rose to realistic operating values. Nevertheless, the CMS obtained from PIM-6FDA and PIM-6FDA-OH surpassed any diffusion-controlled polymer or carbon that has been reported to date.
|
6 |
Tuning PIM-PI-Based Membranes for Highly Selective Transport of Propylene/PropaneSwaidan, Ramy J. 06 December 2016 (has links)
To date there exists a great deal of energetic and economic inefficiency in the separation of olefins from paraffins because the principal means of achieving industrial purity requirements is accomplished with very energy intensive cryogenic distillation. Mitigation of the severe energy intensity of the propylene/propane separation has been identified as one of seven chemical separations which can change the landscape of global energy use, and membranes have been targeted as an emerging technology because they offer scalability and lower capital and operating costs. The focus of this work was to evaluate a new direction of material development for the very industrially relevant propylene/propane separation using membranes. The objective was to develop a rational design approach for generating highly selective membranes using a relatively new platform of materials known as polyimides of intrinsic microporosity (PIM-PIs), the prospects of which have never been examined for the propylene/propane separation. Structurally, PIMs comprise relatively inflexible macromolecular architectures integrating contortion sites that help disrupt packing and trap microporous free volume elements (< 20 Å). To date most of the work reported in the literature on this separation is based on conventional low free volume 6FDA-based polyimides which in the best case show moderate C3H6/C3H8 selectivities (<20) with C3H6 permeabilities too low to garner industrial interest. Due to propylene and propane’s relatively large molecular size, we hypothesized that the use of more open structures can provide greater accessibility to the pores necessary to enhance membrane sieving and flux. It has been shown for numerous key gas separations that introduction of microporosity into a polymer structure can defy the notorious permeability/selectivity tradeoff curve and induce simultaneous boosts in both permeability and selectivity.
The cornerstone approach to designing state of the art high performance PIM-PI membranes for the light gas separations involving maximizing the intra-segmental rigidity of the polymer chain was applied to the C3H6/C3H8 separation. A study regarding a stepwise maximization of intra-molecular rigidity and its effects on C3H6/C3H8 permeation was evaluated by conducting systematic structural modifications to high performance PIM-PIs. State of the art increases in performance were observed in pure-gas measurements as there were significant increases in C3H6/C3H8 selectivity and C3H6 permeability upon doing so. However, mixed-gas measurements showed that there were 65% losses in selectivity due to competitive sorption and mainly plasticization. Based on the conclusions drawn, a fundamental departure from conventional PIM design principles was used, instead emphasizing enhancing inter-chain interactions by introduction of a flexible diamine and functionalization with hydroxyl groups to attempt to immobilize the polymer chains. In doing so, the polymer chains may be able to pack more efficiently and upon sub-Tg annealing cause a microstructural reorganization to form a coplanarized configuration due to the combination of inter-chain charge transfer complexes (CTC) and hydrogen bonding networks. This approach successfully mitigated plasticization, but more importantly resulted in a tightening of the microstructure, especially in the ultra-microporous range (<7 Å) thereby yielding significant boosts in C3H6/C3H8 selectivity. Based on the PIM platform and novel polymer design approach thereof, the C3H6/C3H8 upper bound was thrust to new limits and led to the generation of the most selective solution processable polymers reported for the C3H6/C3H8 separation.
Although the PIM platform has redefined the polymer upper bound, the permeability/selectivity tradeoff still endures, as the C3H6 permeabilities were on the order of 1 to 3.5 Barrer for the most selective polymers. To bridge that gap in permeability, several different approaches were taken. For the first time attempted for C3H6/C3H8 separation, high temperature heating of a PIM-PI to form thermally-rearranged and carbon molecular sieve membranes was employed. The TR membrane showed increased C3H6 permeability and about 50% losses in C3H6/C3H8 selectivity, while the CMS membrane formed at 600 oC showed modest gains in C3H6/C3H8 selectivity with significant improvements in C3H6 permeability.
Finally, hybrid nanocomposite membranes incorporating a metal-organic framework structure into a PIM-PI matrix was used. ZIF-8, which has demonstrated high diffusive selectivities for C3H6/C3H8, was dispersed within the polymer, since previous work by the Koros group indicated that its incorporation into polyimide matrices can facilitate major improvements in both C3H6/C3H8 selectivity and C3H6 permeability compared to the respective neat polymer. Focus was directed towards attempting to improve polymer/nanoparticle adhesion by enhancing the interactions between the polymer and filler particles to mitigate the interfacial defects notorious in mixed-matrix membranes (MMM). To do so, ZIF-8 was dispersed into one of the best performing hydroxyl functionalized PIM-PI for the C3H6/C3H8 separation. The highest loaded mixed-matrix membrane in a glassy polymer to date of 65% (w/w) was achieved. The membranes showed pure-gas selectivities ranging from 34 with 10 Barrer at 30% loading to 43 with 38 Barrer at 65% loading. Strong performance and plasticization resistance were sustained in mixed-gas experiments even to feed pressures approaching the vapor pressure of the C3H6/C3H8 mixture, as selectivities well over 20 were achieved with high permeabilities, thereby demonstrating the potential commercial viability.
Based on the work reported in this dissertation, we hope to help lay a framework to be able to tailor membrane performance and future membrane design to meet the demands of the different applications of the propylene/propane separation and hence show that there can be a marketplace for membranes in the separation. These include the debottlenecking of cryogenic distillation towers for production of polymer-grade propylene (99.5%) to reduce the associated extensive energy load, production of chemical-grade propylene (92-95% propylene), or for the recovery and recycling of olefins from reactor purges of petrochemical processes.
|
7 |
Thickness-dependent physical aging of a triptycene-based Tröger’s base ladder polymer of intrinsic microporosity (PIM-Trip-TB)Albuwaydi, Ahmed Y 04 1900 (has links)
Gas separation membranes are proving to be a sustainable method to mitigate climate change given the rising energy demand. Polymers of intrinsic microporosity (PIMs) have emerged as a novel material class for such application. Physical aging is a major concern for the growth and commercialization of these glassy polymers. Several factors play an important role in determining the effects of physical aging for a PIM film; one important parameter is its thickness.
Gas transport properties of PIM-Trip-TB films of thicknesses between 20-150 µm were monitored over 150 days for physical aging and its dependence on film thickness. Over this period, thicker films had generally higher permeability, and thinner films aged faster.
Although fresh films showed higher selectivity during the initial tests, no correlation was found between film thickness and selectivity after aging. In addition, physical aging was more severe and independent of film thickness for larger-sized gases. Film storing environment affected the physical aging of multiply tested samples significantly, whereas films which were not tested periodically showed very minimal aging. A more systematic approach is required to fully analyze and comprehend factors yielding this phenomenon.
|
Page generated in 0.1522 seconds