Nanoporous polymer hydrogels offer a desirable combination of mechanical, optical, and transport characteristics that have placed them at the core of a variety of biomedical technologies including engineered tissue scaffolds, substrates for controlled release of pharmaceutical compounds, and sieving matrices for electrophoretic separation of DNA and proteins. Ultimately, we would like to obtain a detailed picture of the nanoscale pore morphology and understand how it can be manipulated so that we can rationally identify gel formulations best suited for a specific application. But this goal has proven elusive because the most fundamental descriptors of the pore network architecture (e.g., the average pore size and its polydispersity) are particularly difficult to measure in polymer hydrogels. Here we introduce an approach that enables both the mean pore size and the pore size distribution to be quantitatively determined without prior knowledge of any physical material parameters A novel technique to prepare TEM samples was developed so that the nanoscale hydrogel pore size, pore shape and distribution are clearly visualized and quantitatively studied for the first time. The pore sizes of the hydrogel are also estimated with rheology. A new fixture is used in the rheometer and the whole polymerization process can be directly studied using an in-situ rheology experiment. A series of thermoporometry experiments are also conducted, and suitable methods and equations to study hydrogel pore size and distribution are chosen. The pore size derived from TEM, rheology, DSC is compared and their values are self-consistent. These techniques help us understand how the nanoporous morphology of crosslinked polyacrylamide hydrogels is influenced by their chemical composition and polymerization conditions. It is interesting to find hydrogels with similar pore size but different distribution. For two hydrogels with similar pore size, the broader the distribution, the faster the release rate and the higher the accumulated release percentage. So we can control the release of trapped molecules by simply varying the hydrogel pore size distribution. This discovery would have a very promising potential in the application of pharmaceuticals.

No description available.

The purpose of this study was to assess the decay resistance of wood modified with a variety of chemicals and to attempt to further understand the mechanism by which chemical modification protects wood from decay. Corsican pine (Pinus nigra) sapwood was modified with three cyclic anhydrides; succinic anhydride, alkenyl succinic anhydride (a derivative of succinic anhydride with a 16-18 carbon alkenyl chain) and phthalic anhydride, and with two more widely studied modifying chemicals; acetic anhydride and butyl isocyanate. All reactions were carried out using pyridine as solvent and catalyst. Modified wood was tested against decay fungi in a pure culture test against basidiomycete fungi (Coniophora puteana, Gloeophyllum trabeum, Trametes versicolor and Pycnoporus sanguineus) under different moisture content regimes, an unsterile soil soft rot test, a fungal cellar test and a field trial. Butyl isocyanate proved the most effective modifying chemical at protecting wood from decay, followed by acetic anhydride and then alkenyl succinic anhydride. Uneven distribution of the modifying chemical in wood was evident using each of these three chemicals, particularly in the case of acetic anhydride. Despite its apparent ability to control decay by basidiomycete fungi, alkenyl succinic anhydride was unable to completely protect wood from soft rot fungi. Phthalic and succinic anhydride modifications both proved susceptible to hydrolysis and leaching, and neither were effective as wood protection chemicals. Phthalic anhydride modified wood performed well in the pure culture test, apparently through biocidal action, but was susceptible to decay in unsterile conditions. The approach made in this study to understanding the mechanism of protection was to analyse physical properties of the modified wood cell wall. This involved the measurement of adsorption isotherms, volumetric swell due to water soak, and cell wall pore size (using the solute exclusion technique). Neither the moisture content of modified wood nor its cell wall moisture content (measured as the fibre saturation point from the adsorption analysis) provided a good explanation of decay resistance. In several cases, the relationship between volumetric swell (due to water soak) and weight loss (to a given fungus in pure culture) was found to be consistent between modification types. From this it is concluded that the extent by which water swells modified wood is important to decay resistance. A reduction in cell wall pore volume was measured using the solute exclusion technique, though no further conclusions could be drawn from this test. It is proposed that the mechanism of resistance to decay by basidiomycete fungi involves the blocking of cell wall pores, which restricts the access of degradative agents released by decay fungi. The amount by which wood swells is important in this theory since this will determine by how much transient pores in modified wood can open, and whether enough space is created to bypass this blocking effect. The possibility of the role of site substitution in decay resistance is not discounted, and may contribute to decay resistance, particularly against white rot fungi. Pore blocking is not thought to be the mechanism of protection against soft rot fungi. In this case the substitution and shielding of decay susceptible sites are thought to be more important.

No description available.

Current study of separation mechanism in chromatography heavily relies on the measurement of macroscopic properties, such as retention time and peak width. This dissertation describes the vibrational spectroscopy characterization of separation processes.Raman Spectroscopic characterization of a silica-based, strong anion exchange stationary phase in concentrated aqueous solutions is presented. Spectral response of stationary phase quaternary amine is closely related to changes in interaction between counter anions and the amine functional groups as the result of anion hydration. The molecular-level information obtained will provide useful guidance for control of stationary phase selectivity.To study the effects of stationary phase pore size on separations processes, monodisperse silica particles in the sub-100 nm range are prepared and self-assembled to well-ordered, three-dimensional colloidal arrays. A modified LaMer model is proposed and demonstrated for optimization of reaction conditions that lead to uniform and spherical silica particles. This approach greatly reduces the number of training experiments required for optimization. Fast Fourier transformation of colloidal array scanning electron microscopy images indicates closely-packed hexagonal packing patterns.Using these arrays, a novel system for the measurement of molecular diffusion coefficients in nanopores is reported. This system consists of an ordered colloidal array with well-defined pore structure deposited onto an internal reflection element for in-sit collection of kinetic information by attenuated total reflection-Fourier transform infrared spectroscopy (ATR-FTIR). A mathematical model is established to extract diffusion coefficients from these data. A decrease of approximately eight orders of magnitude in molecular diffusion coefficients is observed for molecular transport in nanopores.Finally, by using this colloidal array-ATR-FTIR system and the corresponding mathematical models that describe absorption in the colloidal array, the distribution in the nanopores of the acetonitrile organic modifier in an aqueous mobile phase solvent system is determined. Based on the results of 50 nm colloidal arrays, pore surface properties have a strong effect on the distribution of organic molecules from bulk solution to the pores.

This master thesis provides an overview of the paper machine with focus on the forming section. The forming section is the first part in the paper machine where the paper pulp is injected through a head box. The paper pulp contains about 99.5% of water and 0.5% fiber. The water as content is reduced by vacuum and gravity. The problem to be studied in this project is related to external rewetting. This is water going back to the paper web from the forming fabric after the dewatering zone. The dewatering is based on vacuum slots under the forming fabric. The vacuum slots absorb water from the soaked paper pulp through the forming fabric. External rewetting causes problem, hence the paper will have a higher dry content when leaving the forming section. The paper should have as low dry content as possible in the end of the forming section. Three different forming fabrics from Albany International were chosen for the project. The structures of the forming fabrics were two different double layers and one plain weave. The performance of the fabrics was studied by 4 different methods. The methods used were 2 different wicking tests, a vacuum dewatering trial and one foulard test. Also micro tomography was done to understand the structure of each design. The main test was a foulard test where the aim was to see in what way the rewetting got affected by different pores sizes. The results showed higher water content for the paper that was on top of the forming fabric with the larger pores.

Porous materials are implemented in several industrial applications such as water desalination, gas separation and pharmaceutical care which they are mainly governed by the pore size and the PSD. Analyzing shale reservoirs are not excluded from these applications and numerous advantages can be gained by evaluating the PSD of a given shale reservoir. Because of the limitations of the conventional characterization techniques, novel methods for characterizing the PSD have to be proposed in order to obtain better characterization results for the porous materials, in general, and shale rocks in particular. Thus, permporosimetry and evapoporometry (EP) technologies were introduced, designed and utilized for evaluating the two key parameters, pore size and pore size distribution. The pore size and PSD profiles of different shale samples from Norway and Argentina were analyzed using these technologies and then confirmed by mercury intrusion porosimeter (MIP). Norway samples showed an average pore diameter of 12.94 nm and 19.22 nm with an average diameter of 13.77 nm and 23.23 nm for Argentina samples using permporosimetry and EP respectively. Both techniques are therefore indicative of the heterogeneity of the shales. The results from permporosimetry are in good agreement with those obtained from MIP technique, but EP for most part over-estimates the average pore size. The divergence of EP results compared to permporosimetry results is referred to the fact that the latter technique measures only the active pores which is not the case with the former technique. Overall, both techniques are complementary to each other which the results from both techniques seem reasonable and reliable and provide two simple techniques to estimate the pore size and pore size distributions for shale rocks.

A simple capillary flow porometer (CFP) was assembled for pore structure characterization of monolithic capillary liquid chromatography columns based on ASTM standard F316-86. Determination of differential pressures and flow rates through dry and wet samples provided the necessary information to determine the through-pore throat diameter, bubble point pore diameter, mean flow pore diameter, and pore distribution. Unlike measurements in bulk using traditional techniques to provide indirect information about the pore properties of monolithic columns, monoliths can be characterized in their original chromatographic forms with this system. The performance of the new CFP was first evaluated by characterizing the pore size distributions of capillary columns packed with 3, 5, and 7 µm spherical silica particles. The mean through-pore diameters of the three packed columns were measured to be 0.5, 1.0 and 1.4 µm, which are all smaller than the pore diameters calculated from a close-packed arrangement (i.e., 0.7, 1.1 and 1.6 µm), with distributions ranging from 0.1 - 0.7, 0.3 - 1.1 and 0.4 - 2.6 µm, respectively. This is reasonable, since visual inspection of SEM images of the particles showed relatively large fractions of smaller than specified particles in the samples. Typical silica monoliths were fabricated via phase separation by polymerization of tetramethoxysilane (TMOS) in the presence of poly(ethylene glycol) (PEG). The mean pore diameter and pore size distribution measured using the CFP system verified that a greater number of pores with small throat diameters were prepared in columns with higher PEG content in the prepolymer mixture. SEM images also showed that the pore diameters of monoliths fabricated in bulk were found to be smaller than those in monoliths synthesized by the same procedure, but confined in capillary tubes. The CFP system was also used to study the effects of column inner diameter and length on pore properties of polymeric monoliths. Typical monoliths based on butyl methacrylate (BMA) and poly(ethylene glycol) diacrylate (PEGDA) in capillary columns with different inner diameters (i.e., 50 to 250 µm) and lengths (i.e., 1.5 to 3.0 cm) were characterized. The mean pore diameters and the pore size distributions indicated that varying the inner diameter and/or the length of the column affected little the pore properties. The latter finding is especially important to substantiate the use of CFP for determination of monolithic pore structures in capillaries. The results indicate that the through-pores are highly interconnected and, therefore, pore structure determinations by CFP are independent of capillary length. A negatively charged polymer monolith based on BMA, ethylene glycol dimethacrylate (EDMA) and 2-acryloylamido-2-methylpropanesulfonic acid monomer (AMPS), was successfully prepared in silica sacrificial layer, planar (SLP) microchannels. Extraction of FITC (fluorescein 5-isothiocyanate) labeled phenylalanine and capillary electrochromatography (CEC) of FITC labeled glycine using this monolithic stationary phase were demonstrated.

Parabutoporin (PP) and opistoporin 1 (OP1) are cation, a-helical antimicrobial peptides isolated from the southern African scorpion species, Parabuthus schlechteri and Opistophthalmus carinatus, respectively. Along with their antimicrobial action against bacteria and fungi, these peptides show pore-forming properties in the membranes of mammalian cells. Pore-formation and ion selectivity in cardiac myocytes were investigated by measuring the whole cell leak current by means of the patch clamp technique. Pore-formation was observed as the induction of leak currents. Ion selectivity of the pores was indicated by the shift of the reversal potential (E,,,) upon substitution of intra (K' with CS' and CI- with aspartate) and extracellular (Na' with NMDG') ions. Results were compared with the effect of gramicidin A used as a positive control for monovalent cation selective pores. PP and OP I induced a fluctuating leak current and indicate non-selectivity of PP and OP1-induced pores. An osmotic protection assay to determine estimated pore size was performed on the cardiac myocytes. PP and OP1-induced pores had an estimate pore size of 1.38-1.78 nm in diameter. The effect of PP and OP1 on the membrane potential (MP) of a neuroblastoma cell line and cardiac myocytes was investigated. TMRM was used to mark the MP fluorescently and a confocal microscope used to record the data digitally. The resting membrane potential (RMP) of the neuroblastoma cells was calculated at -38.3 f 1.9 mV. PP (0.5 uM) and OP1 (0.5-1 uM) depolarized the entire cell uniformly to a MP of -1 1.9 k 3.9 mV and -9.4 k 1.9 mV, respectively. This occurred after 20-30 min of peptide exposure. In the case of the cardiac myocytes depolarization was induced to -39.7 f 8.4 mV and -32.6 f 5.2 mV by 0.5-1 uM PP and 1.5-2.5 uM OPl, respectively. / Thesis (M.Sc. (Physiology))--North-West University, Potchefstroom Campus, 2006.

The purpose of this study was to construct a flowmeter that could accurately measure the hydraulic permeability of electrospun fibrinogen scaffolds, providing insight into the transport properties of electrospun scaffolds while making the measurement of their topographical features (fiber and pore size) more accurate. Three different concentrations of fibrinogen were used (100, 120, and 150mg/ml) to create scaffolds with three different fiber diameters and pore sizes. The fiber diameters and pore sizes of the electrospun scaffolds were analyzed through scanning electron microscopy and image analysis software. The permeability of each scaffold was measured and used to calculate permeability-based fiber diameters and pore sizes, which were compared to values obtained through image analysis. Permeability measurement revealed scaffold permeability to increase linearly with fibrinogen concentration, much like average fiber diameter and pore size. Comparison between the two measurement methods proved the efficacy of the flowmeter as a way to measure scaffold features.