This thesis deals with the development, processing and characterization of position sensitive detectors and, in addition, to the development of compact and cost effective spectrometers. Position sensitive detectors are used to measure, with great accuracy and speed, the position of a light spot incident on the surface. Their main use is for triangulation, displacement and vibration measurements. A type of position sensitive detector based on the MOS principle and using optically transparent indium tin oxide as a gate contact has been developed. This type of detector utilizes the MOS principle where an induced channel forms beneath the gate oxide in the surface of the Silicon substrate. One and two dimensional detectors have both been fabricated and characterized. The first measurements showed that the linearity did not fulfil expectations and it was suspected that stress induced by the gate contact could be the reason for the seemingly high nonlinearity. Further investigations into both the p-n junction and the MOS type position sensitive detectors lead to the conclusion that the indium tin oxide gate is responsible for inducing a substantial stress in the surface of the detector, thus giving rise to increased position nonlinearity. The heat treatment step which was conducted was determined to be critical as either a too short or too long heat treatment resulted in stress in the gate and channel leading to position nonlinearity. If a correctly timed heat treatment is performed then the detector’s linearity is in parity with the best commercial position sensitive detectors. In addition, the development of very small, compact and cost effective spectrometers has been performed with the aim of constructing devices for use in the process industry. The development of a wedge shaped array of Fabry-Perot interferometers that can be mounted directly on top of a detector makes it possible to construct a very compact spectrometer using the minimum amount of optics. This wedge interferometer has been evaluated by means of array pixel detectors and position sensitive detectors for both the infrared and the visible wavelength ranges. When used with a position sensitive detector it is necessary to use a slit to record the intensity of the interferogram for many points over the detector, equivalent to pixels on an array detector. Usually the use of moving parts in a spectrometer will impose the use of high precision scanning mechanisms and calibration. By using a position sensitive detector for the interferogram readout both the position and the intensity are known for every measurement point and thus the demands placed on the scanning system are minimized. / Denna avhandling behandlar utveckling, processning och karakterisering av positionskänsliga detektorer och även utveckling av kompakta, kostnadseffektiva spektrometrar. Positionskänsliga detektorer används för att mäta positionen av en infallande ljuspunkt på ytan med hög noggrannhet och hastighet. Det huvudsakliga användningsområdet är triangulering, förskjutnings och vibrationsmätningar. En typ av positionskänslig detektor baserad på MOS principen och som använder optiskt transparent indium-tenn-oxid som ”gate” kontakt har utvecklats och karakteriserats. Denna typ av detektor utnyttjar MOS principen där en inducerad kanal bildas under ”gate” oxiden i ytan på kiselsubstratet. Både en endimensionell och en tvådimensionell detektor har tillverkats och karakteriserats. De första mätningarna visade på att linjäriteten inte var den förväntade och det misstänktes att stress inducerad av ”gate” kontakten kunde vara orsaken till den tillsynes för höga ickelinjäriteten. Ytterligare undersökning på både p-n och MOS positionskänsliga detektorer ledde till slutsatsen att indium-tenn-oxid ”gate” kontakten är ansvarig för att orsaka en väsentlig stress i ytan på detektorn och därigenom orsaka ökad olinjäritet i positionsbestämningen. Värmebehandlingssteget som utförs fastställdes vara kritiskt där en för kort eller för lång värmebehandling resulterar i stress i ”gate” kontakten och kanalen som leder till olinjäritet. Om en korrekt värmebehandling utförs så är de tillverkade detektorernas linjäritet i paritet med de bästa kommersiella positionskänsliga detektorerna. Utveckling av väldigt små, kompakta och kostnadseffektiva spektrometrar har också utförts med målet att konstruera enheter för användning i process industrin. Utvecklingen av en kilformad ”array” av Fabry-Perot interferometrar som kan monteras direkt på en detektor gör det möjligt att konstruera en väldigt kompakt spektrometer med minimalt med optik. Denna kilformade interferometer har utvärderats med arraydetektorer, både för det infraröda och det synliga våglängdsområdet, och också med positionskänsliga detektorer. När den används med en positionskänslig detektor så är det nödvändigt att använda en springa att begränsa ljuset med för att registrera intensiteten av interferrogrammet i många punkter över detektorn, vilket är likvärdigt med pixlar på en arraydetektor. Vanligtvis gör användandet av rörliga delar i en spektrometer att mekanismer med hög precision och kalibrering måste användas. Genom att använda en positionskänslig detektor för att läsa ut interferrogrammet så kommer både positionen såväl som ljusintensiteten att vara känd i varje mätpunkt och därför minimeras kravet på förflyttningsmekanismen.

No description available.

<p>The application of pulse shape analysis (PSA) and γ-ray tracking techniques has attracted a great deal of interest in the recent years in fields ranging from nuclear structure studies to medical imaging. These new data analysis methods add position sensitivity as well as directional information for the detected γ-rays to the excellent energy resolution of germanium detectors. This thesis focuses on the application of PSA on planar segmented germanium detectors, divided into three separate studies. The pulse shape analysis technique known as the matrix method was chosen due to its ability to treat events with arbitrary number and combinations of interactions within a single detector. It has been applied in two experiments with the 25-fold segmented planar pixel detector -- imaging and polarization measurements -- as well as in a simulation of upcoming detectors for DESPEC at NuSTAR/FAIR.</p><p>In the first experiment, a point source of ¹³⁷Cs was imaged. Events where the 662 keV γ-rays scattered once and were then absorbed in a different segment were treated by the PSA algorithm in order to find the locations of these interactions. The Compton scattering formula was then used to determine the direction to the source. The experiment has provided a robust test of the performance of the PSA algorithm on multiple interaction events, in particular those with interactions in adjacent segments, as well as allowed to estimate the realistically attainable position resolution. In the second experiment, the response of the detector to polarized photons of 288 keV was studied. The polarization of photons can be measured through the observation of the angular distribution of Compton-scattered photons, Hence the ability to resolve the interaction locations had once again proven useful.</p><p>The third study is focused on the performance of the proposed planar germanium detectors for the DESPEC array. As these detectors have not yet been manufactured at the time of this writing, a set of data simulated in GEANT4 was used. The detector response was calculated for two of the possible segmentation patterns -- that with a single pixelated contact and one where both contacts are segmented into mutually orthogonal strips. In both cases, PSA was applied in order to reconstruct the interaction locations from this response. It was found that the double-sided strip detector can achieve an over-all better position resolution with a given number of readout channels. However, this comes at the expense of a small number of complex events where the reconstruction fails. These results have also been compared to the performance of the 25-fold pixelated detector.</p>

The application of pulse shape analysis (PSA) and γ-ray tracking techniques has attracted a great deal of interest in the recent years in fields ranging from nuclear structure studies to medical imaging. These new data analysis methods add position sensitivity as well as directional information for the detected γ-rays to the excellent energy resolution of germanium detectors. This thesis focuses on the application of PSA on planar segmented germanium detectors, divided into three separate studies. The pulse shape analysis technique known as the matrix method was chosen due to its ability to treat events with arbitrary number and combinations of interactions within a single detector. It has been applied in two experiments with the 25-fold segmented planar pixel detector -- imaging and polarization measurements -- as well as in a simulation of upcoming detectors for DESPEC at NuSTAR/FAIR. In the first experiment, a point source of 137Cs was imaged. Events where the 662 keV γ-rays scattered once and were then absorbed in a different segment were treated by the PSA algorithm in order to find the locations of these interactions. The Compton scattering formula was then used to determine the direction to the source. The experiment has provided a robust test of the performance of the PSA algorithm on multiple interaction events, in particular those with interactions in adjacent segments, as well as allowed to estimate the realistically attainable position resolution. In the second experiment, the response of the detector to polarized photons of 288 keV was studied. The polarization of photons can be measured through the observation of the angular distribution of Compton-scattered photons, Hence the ability to resolve the interaction locations had once again proven useful. The third study is focused on the performance of the proposed planar germanium detectors for the DESPEC array. As these detectors have not yet been manufactured at the time of this writing, a set of data simulated in GEANT4 was used. The detector response was calculated for two of the possible segmentation patterns -- that with a single pixelated contact and one where both contacts are segmented into mutually orthogonal strips. In both cases, PSA was applied in order to reconstruct the interaction locations from this response. It was found that the double-sided strip detector can achieve an over-all better position resolution with a given number of readout channels. However, this comes at the expense of a small number of complex events where the reconstruction fails. These results have also been compared to the performance of the 25-fold pixelated detector. / QC 20101110

No description available.