Spelling suggestions: "subject:"most earthquake assessment"" "subject:"most earthquake essessment""
1 |
Performance-Based Seismic Monitoring of Instrumented BuildingsRoohi, Milad 01 January 2019 (has links)
This dissertation develops a new concept for performance-based monitoring (PBM) of instrumented buildings subjected to earthquakes. This concept is achieved by simultaneously combining and advancing existing knowledge from structural mechanics, signal processing, and performance-based earthquake engineering paradigms. The PBM concept consists of 1) optimal sensor placement, 2) dynamic response reconstruction, 3) damage estimation, and 4) loss analysis. Within the proposed concept, the main theoretical contribution is the derivation of a nonlinear model-based observer (NMBO) for state estimation in nonlinear structural systems. The NMBO employs an efficient iterative algorithm to combine a nonlinear model and limited noise-contaminated response measurements to estimate the complete nonlinear dynamic response of the structural system of interest, in the particular case of this research, a building subject to an earthquake. The main advantage of the proposed observer over existing nonlinear recursive state estimators is that it is specifically designed to be physically realizable as a nonlinear structural model. This results in many desirable properties, such as improved stability and efficiency.
Additionally, a practical methodology is presented to implement the proposed PBM concept in the case of instrumented steel, wood-frame, and reinforced concrete buildings as the three main types of structural systems used for construction in the United States. The proposed methodology is validated using three case studies of experimental and real-world large-scale instrumented buildings. The first case study is an extensively instrumented six-story wood frame building tested in a series of full-scale seismic tests in the final phase of the NEESWood project at the E-Defense facility in Japan. The second case study is a 6-story steel moment resisting frame building located in Burbank, CA, and uses the recorded acceleration data from the 1991 Sierra Madre and 1994 Northridge earthquakes. The third case is a seven-story reinforced concrete structure in Van Nuys, CA, which was severely damaged during the 1994 Northridge earthquake.
The results presented in this dissertation constitute the most accurate and the highest resolution seismic response and damage measure estimates obtained for instrumented buildings. The proposed PBM concept will help structural engineers make more informed and swift decisions regarding post-earthquake assessment of critical instrumented building structures, thus improving earthquake resiliency of seismic-prone communities.
|
2 |
Structural Damage Detection by Comparison of Experimental and Theoretical Mode ShapesRosenblatt, William George 01 March 2016 (has links) (PDF)
Existing methods of evaluating the structural system of a building after a seismic event consist of removing architectural elements such as drywall, cladding, insulation, and fireproofing. This method is destructive and costly in terms of downtime and repairs. This research focuses on removing the guesswork by using forced vibration testing (FVT) to experimentally determine the health of a building. The experimental structure is a one-story, steel, bridge-like structure with removable braces. An engaged brace represents a nominal and undamaged condition; a dis-engaged brace represents a brace that has ruptured thus changing the stiffness of the building. By testing a variety of brace configurations, a set of experimental data is collected that represents potential damage to the building after an earthquake. Additionally, several unknown parameters of the building’s substructure, lateral-force-resisting-system, and roof diaphragm are determined through FVT.
A suite of computer models with different levels of damage are then developed. A quantitative analysis procedure compares experimental results to the computer models. Models that show high levels of correlation to experimental brace configurations identify the extent of damage in the experimental structure. No testing or instrumentation of the building is necessary before an earthquake to identify if, and where, damage has occurred.
|
Page generated in 0.0879 seconds