Master’s thesis deals with diagnostics and reconstruction of neo-gothic chapel in Medlice. Summary of appropriate testing methods for this chapel is compiled. Visual examination of whole structure have been performed by diagnostics. Masonry element strength was found out at specimens which had were taken out from structure (drill cores and whole bricks). Masonry elements also was tested by Schmidt hammer LB. Mortar was tested by Kucera’s drill. Masonry strength required for static calculation was computed from achieved values. After examination of all structure defects have been designed reconstruction by post-tensioning.

The aim is to propose solutions to the new bridge construction due to its unsatisfactory compared to the existing bridge reconstruction project . There are three studies bridging and selected variant trapezoidal plate further processed static opinion. The design was judged by the ultimate limit states and usability. Partial assessments were made for the anchoring system, anchorage area , unravels notched bars and store design to support .

The thesis deals with design of strengthening of existing bridge structure near the village Holýšov using modern method of additional presstresing. The bridge over the river of Radbuza is h-shaped beam bridge, which was built in 1924. In the present state its load capacity is under the limits for bridges situated on first-class roads. Original documentation of the bridge does not exist, the main source of information about construction details is the diagnostics research. The method of reinforcement by post-tensioning by cables in substituted cable ducts is highly efective in terms of the incerease the load capacity of existing bridge structure. The design of strengthening and the final load capacity was verified by static calculation.

The work deals with design of load-bearing structure of watertower. The solution include design and assessment of all main parts of watertower according to ČSN EN 1992 in the ultimate limit state and the serviceability limit state (crack limitation).

The aim of the Master´s thesis is to design the prestressed floor construction of the shopping centre. The construction is supported by the columns with the maximal span dimensions 16,0*16,6 m. The design is made according to the VSL (VSL International Ltd.)slab system - post-tensioned slab prestressed by the unbonded system of 4 monostrand units. In the thesis there is also made a simplified design of the reinforced concrete floor construction supported with the bigger amount of the columns. It is made a comparison of the both types of the floor slabs and the evaluation of their advantages and disadvantages. The statical analysis and the calculation of the internal forces is assessed by the program Nexis 3.60.15 32.

The matter of this diploma thesis is a static storage tank for petroleum substances, the study of a solution for appropriate shape of shell and its effort to dihedral for roofing, and the study of effect of the storage of inner roofs walls of the tank to the size of the internal forces. The internal walls are carried out by the method of finite elements in the engineering program Scia Engineering 2013 and on the basis of it, designing of the framing sections of the tank. There is a calculation part of the lower horizontal bias wreaths of the shell and internal supporting wall. All the components are assessed on the 1st limit state of the load-bearing capacity and the 2nd limit state of the application (emergence cracks, limiting voltage in the concrete and a prestressing steel). The existing external wall is assessed only on the marginal status load of carrying capacity. The part of diploma thesis is also drawing documentation, accompanying report and technical report. The goal of the diploma thesis was to design the tank without an occurrence of the cracks in the concrete so as the vertical wall was prestressing only in the horizontal direction and the optimal proposal roof tanks as an addition.