This thesis occupies with the design of the road bridge over the stream Živný, a railway lane and a projected road between Běleč village and Husinec village. There are designed three variants of bridges. The variant no. 1 – continuous box girded beam – was chosen for the detailed analysis. The pre-stressed concrete road bridge is designed and evaluated according to European standards – Euro codes. The sequential construction influence and its impact on the construction is also considered in the calculations. The drawing documentation and the visualization of the bridge are made.

The aim of this master thesis is a design of the pedestrian bridge across the highway. The bridge is formed by a slab structure of 6 spans with lenghts from 9 to 51 m. The main spans are suspended on a V shape pylon. The deck of the span across the highway is assambled of precast segments and composite deck slab. The deck is in the lenghtways kept in the parabolic arch. The model of the construction is made in software ANSYS, the solution was done non-linear. The design and assessment are according to the europien standard.

The aim of this diploma thesis is the design of the roofing of an ice hockey stadium situated in Žďár nad Sázavou. Plan view dimensions are 55 m x 77 m. The structural height of the roof varies from 10 to 17 m. The roof itself consists of pipe truss girders with a span of 55 m, which are supported by columns on each side. The girders are suspended by a load-carrying arch with a span of 96 m and a camber of 29 m through a system of pre-stressed cables. To determine the internal forces, structural analysis software Scia Engineer was used. Individual elements were then manually designed.

The subject of the diploma thesis is the design of the ghrinder bridge over the Kyselá voda brook valley. The main topic is static calculation of supporting construction of six span structure. Two studies were executed and the second option, pre-stressed girder bridge was chosen. The lenght of the spans is 27 + 6 x 35 + 27 m. Static model and effect of loading are solved in software Scia Engineer. Reviews are calculated by hand according to current standards.

This master's thesis deals with application of modern injection system Common Rail on six-cylinder CI engine. One of aims of thesis is to get a large overview of pressure accumulator injection system and explore the development in this area. Among main aims of the thesis belong a new construction layout in Pro/Engineer, accomplishing of static and dynamic analyse of most important parts via the finite element method (FME) and necessary control calculations. Finally, the design documentation of new most essential designed parts will be made. During making the thesis necessary source materials obtained from Vývojový ústav traktorů a.s. of Zetor Group company was made use of.

The subject of the diploma thesis is the design of the ghrinder bridge over the Knovízský potok brook valley. The main topic is static calculation of supporting construction of five span structure. Three studies were executed and one of them, pre-stressed girder bridge was chosen. The langht of the spans is 27 + 3 x 32 + 27 m. Static model and effect of loading are solved in software Scia Engineer. Reviews are caltulated by hand according to current standards.

[pt] Colunas protendidas de aço representam uma excelente solução estrutural em escoramentos de grandes estruturas e em colunas de estruturas espaciais de apoio a lonas tensionadas de coberturas de grandes vãos. Após um estudo extensivo do comportamento teórico através do uso do programa ANSYS onde avaliou-se a geometria estrutural mais eficiente, níveis de protensão e características dos cabos de aço, foram então definidos os diversos ensaios experimentais a serem executados em colunas com doze metros de comprimento e com tubos de 89,3 mm de diâmetro. A característica inédita deste estudo é a execução de ensaios tri-dimensionais em escala real deste tipo de coluna. Foram executadas comparações de resultados teóricos com os obtidos experimentalmente e foram feitas recomendações de análise e projeto destas estruturas. / [en] Pre-stressed steel columns represent an efficient structural solution for a great variety of temporary/permanent supports systems including large span spatial structures using pre-tensioned fabrics. The first step of the present investigation comprised a painstaking investigation of the structural behaviour of these members with the aid of finite element simulations performed with the ANSYS program. Its results indicated trends for the determination of the most efficient structural geometries, steel ties pre-stressing levels and characteristics. With these results in hand, the investigation proceeded with full-scale experimental tests executed in twelve meters pre-stressed stayed steel columns with an approximately diameter of ninety millimetres. The main contribution of the present investigation was the conception, development and execution of new tri-dimensional full-scale tests for this load bearing systems. The test results enable theoretical and numerical results to be validated against experimental evidence later to be introduced in structural design codes.

The aim of this master thesis is multi-criteria assessment SBToolCZ of the building district department for Czech police in Kyjov. The building has a basement with underground garages, shooting range and technical facilities (boiler room, air conditioning room, storage, archives, cleaning room), and a ground floor with offices covered by a flat roof. The load-bearing structure of the basement is designed from watertight reinforced concrete. The ground floor has ceramic block walls. The floor and roof structure are designed from pre-stressed Spiroll. The building envelope is insulated with ETICS. The thesis also contains project documentation of building and HVAC design. The project was carried out in the AutoCad programme. Project documentation was prepared according to valid legal and technical regulations.

This diploma thesis deals with the demolition of a bridge located at the D1 motorway from Prague to Brno. The bridge no longer meets the load and width requirements of today´s standards. The thesis also deals with the construction of a new bridge, which will be expanded into D28/120 category. This expansion will allow for provisory use of the carriageways of one half of the motorway in both directions. The whole reconstruction is very time consuming that is the reason the new bridge is made of prefabricated pre-tensioned girders with a composite bridge deck. This can save time and the new bridge can be open for service in a shorter period of time.

This diploma thesis solves design of the new building for temporary accommodation. The building of hotel is located in the center of village Halenkov on plot no. 103/1, which is city plan for construction of buildins for development. The building is designed as two and no cellerage. The floor plan of designed building is creating the shape of letter L. The has gabled roof with a slope of 40 degree at the part for accomodation and single-layer flat at the part for restaurant. The building is of brick construction system of Porotherm blocks based on concrete footings. The ceilings consist of reinforced concrete monolithic slab andpre-stressed concrete floor slabs. The hotel is equipped with 27 rooms for 50 guests and the restaurant is designed for 72 customers. The thesis is processed in the form of project documentation for new building, containing all the requirements according to applicable standards and regulations.