Made available in DSpace on 2014-12-17T14:07:12Z (GMT). No. of bitstreams: 1 TercioGM_TESE.pdf: 5867799 bytes, checksum: 0584d96a18e4441b6389a02717093ac4 (MD5) Previous issue date: 2012-11-23 / Coordena??o de Aperfei?oamento de Pessoal de N?vel Superior / Extractivism mineral is considered an activity highly degrading, due to the large volume of material that he moves in the form of ore and residues. The vast majority of mining companies do not show any technology or economically viable application that will allow the recycling of mineral residue, these being launched in areas receiving located the "open skies" degrade the environment. In Rio Grande do Norte to the production of ceramic red restricts their activities to the production of products such as: solid bricks, ceramic blocks, tiles, among others. Seeking to unite experiences and technical information that favor sustainable development, with important benefits to the construction sector and civil society in general, the present work studies the incorporation of the residue of scheelite in ceramic matrix kaolinitic, coming from the municipality of Boa Sa?de - RN, in percentage of 5 %, 10 %, 20 %, 30% 40% and 50 %, by evaluating its microstructure, physical properties and formulation. The raw materials were characterized through the trials of X ray fluorescence, Diffraction of X rays, Differential Thermal Analysis and Termogravimetric Analysis. The samples were formed and fired at temperatures of 850o, 900o, 1000o, 1050o, 1100o, 1150o and 1200 oC, with isotherm of 1 hour and heating rate of 10 oC/min. Assays were performed technological of loss to fire, Water Absorption, Apparent Porosity, Apparent Density, Mass Loss in Fire and Bending Resistance; in addition to the Scanning Electron Microscopy, analyzing their physical and mechanical properties. The use of residue of scheelite in ceramic mass kaolinitic provided a final product with technological properties that meet the technical standards for the production of bricks and roofing tiles, with the percentage of 20% of waste that showed the best results / O extrativismo mineral ? considerado uma atividade altamente degradante, devido ao grande volume de material que ele movimenta em forma de min?rio e res?duo. A grande maioria das empresas mineradoras n?o apresenta nenhuma tecnologia ou aplica??o economicamente vi?vel que permitam a reciclagem do res?duo mineral, sendo estes lan?ados em ?reas de recebimento localizadas a c?u aberto , degradando o meio ambiente. No Rio Grande do Norte a produ??o de cer?mica vermelha restringe suas atividades ? produ??o de produtos como: tijolos maci?os, blocos cer?micos, telhas, dentre outros. Buscando unir experi?ncias e informa??es t?cnicas que favore?am o desenvolvimento sustent?vel, com importantes benef?cios ao setor da Constru??o Civil e ? sociedade em geral, o presente trabalho estuda a incorpora??o do res?duo de scheelita em matriz cer?mica caulin?tica, proveniente do munic?pio de Boa Sa?de RN, em percentuais de 5%, 10%, 20%, 30% 40% e 50%, avaliando sua microestrutura, propriedades f?sicas e formula??o. As mat?rias-primas foram caracterizadas atrav?s dos ensaios de Fluoresc?ncia de raios X, Difra??o de raios X, An?lise T?rmica Diferencial e An?lise Termogravim?trica. Os corpos de prova foram conformados e queimados nas temperaturas de 850o, 900o, 1000o, 1050o, 1100o, 1150o e 1200 oC, com isoterma de 1 hora e taxa de aquecimento de 10 oC/min. Foram realizados os ensaios tecnol?gicos de Perda ao Fogo, Absor??o de ?gua, Porosidade Aparente, Massa Espec?fica Aparente e Tens?o de Ruptura ? Flex?o; al?m da Microscopia Eletr?nica de Varredura, analisando-se suas propriedades f?sicas e mec?nicas. A utiliza??o de res?duo de scheelita em massa cer?mica caulin?tica propiciou um produto final com propriedades tecnol?gicas que atendem as normas t?cnicas para produ??o de blocos e telhas cer?micas, sendo que o percentual de 20% de res?duo apresentou os melhores resultados

Made available in DSpace on 2014-12-17T14:07:15Z (GMT). No. of bitstreams: 1 KeiteARA_DISSERT.pdf: 2612937 bytes, checksum: ec59db9fd6d1145d803c85bac8a8f46c (MD5) Previous issue date: 2013-11-29 / The industrial production of ornamental rocks and the burning of coffee husk generate waste that is discarded into the environment. However, with the study of the incorporation of these residues in ceramic products, may be found an alternative to reducing environmental impacts and detrimental effects on human health caused by its indiscriminate disposal of waste in nature. Thus, this work aimed to study the addition of ashes of the coffee husk and granite residue in matrix of red ceramic. The raw materials were dry milled and sieved to mesh 100. To characterize the raw materials were carried out analyzes of X-ray diffraction (XRD), X-ray fluorescence (XRF), particle size analysis (PSA), differential thermal analysis (DTA) and thermogravimetric analysis (TG). Six formulations were prepared where the clay content was kept constant (70%wt) and ashes contents and granite residue varied from 10, 15, 20 and 30%. Dilatometrics analyzes were performed at four selected formulations, containing them: 100% clay (A100); 70% clay and 30% ashes (A70C30); 70% clay and 30% granite residue (A70G30); and 70% clay, 15% granite residue and 15% ashes (A70G15C15). The samples were prepared by uniaxial compaction with pressure of 25 MPa, and fired at temperatures of 800?C, 850?C, 900?C, 950?C, 1000?C and 1100?C. Assays were performed to determine the linear shrinkage of burning (LSB), water absorption (WA), apparent porosity (AP), density (D) and tensile bending. Also were performed analyzes of X-ray diffraction (XRD) and scanning electron microscopy (SEM) of the samples fired. The formulations incorporating granite residue and/or ashes reached the required limits of water absorption according to NBR 15270-1 and NBR 15310 and tensile bending according to classical literature (SANTOS, 1989) necessary for the production of tiles and ceramic block for masonry sealing / A produ??o industrial de rochas ornamentais e a queima da casca do caf? geram res?duos que s?o descartados no meio ambiente. Por?m, com o estudo da incorpora??o destes res?duos em produtos cer?micos, poder? ser encontrada uma alternativa para a redu??o dos impactos ambientais e efeitos danosos ? sa?de humana causados pelo seu descarte indiscriminado na natureza. Nesse sentido, este trabalho teve como objetivo estudar a adi??o de cinzas da casca do caf? e res?duo de granito na argila usada para a produ??o de cer?mica vermelha. As mat?rias-primas foram mo?das a seco e peneiradas na malha 100 mesh. Para caracterizar as mat?rias-primas foram realizadas as an?lises de difra??o de raios X (DRX), fluoresc?ncia de raios X (FRX), an?lise granulom?trica (AG), an?lise t?rmica diferencial (DTA) e an?lise termogravim?trica (TG). Foram preparadas seis formula??es onde o teor de argila foi mantido constante (70% em peso) e os teores de cinzas e de res?duo de granito variaram de 10, 15, 20 e 30%. Foram realizadas an?lises dilatom?tricas em quatro formula??es selecionadas, contendo elas: 100% argila (A100); 70% argila e 30% cinza (A70C30); 70% argila e 30% res?duo de granito (A70G30); e 70% argila, 15% res?duo de granito e 15% cinza (A70G15C15). As amostras foram confeccionadas por compacta??o uniaxial com press?o de 25 MPa, e queimadas ?s temperaturas de 800?C, 850?C, 900?C, 950?C, 1000?C e 1100?C. Foram realizados ensaios para determinar a retra??o linear de queima (RLq), absor??o de ?gua (AA), porosidade aparente (PA), massa espec?fica aparente (MEA) e tens?o de ruptura ? flex?o (TRF). Foram realizadas tamb?m an?lises de difra??o de raios X (DRX) e microscopia eletr?nica de varredura (MEV) das amostras queimadas. As formula??es com incorpora??o de res?duo de granito e/ou cinza alcan?aram os limites exigidos de absor??o de ?gua segundo as normas NBR 15270-1 e 15310 e de tens?o de ruptura ? flex?o segundo a literatura cl?ssica (SANTOS, 1989), necess?rios para a produ??o de telhas e blocos cer?micos para alvenaria de veda??o

Made available in DSpace on 2014-12-17T14:48:16Z (GMT). No. of bitstreams: 1 ManoelFNN_DISSERT.pdf: 4039272 bytes, checksum: 94a5a9d27ce419af64ac066b0c814a1d (MD5) Previous issue date: 2013-11-28 / It is a case study that reports the construction of metal truss bridge in the river Potengi in Natal, Rio Grande do Norte, between the years 1912 and 1916. From testimonials on steel bridges in Brazil and worldwide including foundations. Documentary research from procurement of projects and contracts was performed. A chronology of construction, with a description of the equipment used and its original budget with the Brazilian government. Still, we used interviews and surveys with experimental sampling / testimonies, laboratory tests. This study aims to analyze historically and technically the Bridge over the River Potengi, emphasizing primarily the construction process, the qualities and characteristics of the materials used and the technological, chemical, mineralogical and microstructural properties of cement and concrete used in its construction. Taking as conclusions that cements pozol?nicos ensured a good durability to the concrete in a hundred-year period and that the solution employed with the compressed air caissons was right / ? um estudo de caso que relata a constru??o da ponte em treli?a met?lica sobre o rio Potengi em Natal, Estado do Rio Grande do Norte, entre os anos de 1912 e 1916. A partir de aprecia??es sobre pontes met?licas no Brasil e no mundo inclusive funda??es. Foi realizada uma pesquisa documental a partir da obten??o dos projetos e contratos. Uma cronologia da constru??o, com a descri??o de equipamentos utilizados e de seu or?amento original com o governo brasileiro. Utilizaram-se ainda, entrevistas e pesquisas experimentais com coleta de amostras/testemunhos, ensaios em laborat?rio. O presente trabalho tem como objetivo analisar historicamente e tecnicamente a Ponte sobre o Rio Potengi, ressaltando, primordialmente, o processo construtivo, as qualidades e caracter?sticas dos materiais utilizados e as propriedades tecnol?gicas, qu?micas, mineral?gicas e microestruturais do cimento e do concreto empregados em sua constru??o. Tendo-se como conclus?es que cimentos pozol?nicos garantiram uma boa durabilidade ao concreto em um per?odo de cem anos e que a solu??o empregada com tubul?es ? ar comprimido foi acertada