In areas of transported overburden there is frequently a weak relationship between soil and the underlying mineralized bedrock. Vegetation has the capability to absorb metals from the underlying substrate via its extensive root systems. These metals are translocated to the various organs of the plant such as leaves, twigs bark and roots without negatively impacting on the normal functioning of the plant. The analysis of the vegetation may therefore be used to locate deeply buried mineral targets. The main focus of this investigation was to determine the suitability of A. karroo and B. albitrunca for biogeochemical prospecting for gold in the Blue Dot Mine area. The appraisal of the suitability for both plant species requires an understanding of element absorption and distribution patterns in relation to variable composition of bedrock and associated underlying gold mineralization.

In areas of transported overburden there is frequently a weak relationship between soil and the underlying mineralized bedrock. Vegetation has the capability to absorb metals from the underlying substrate via its extensive root systems. These metals are translocated to the various organs of the plant such as leaves, twigs bark and roots without negatively impacting on the normal functioning of the plant. The analysis of the vegetation may therefore be used to locate deeply buried mineral targets. The main focus of this investigation was to determine the suitability of A. karroo and B. albitrunca for biogeochemical prospecting for gold in the Blue Dot Mine area. The appraisal of the suitability for both plant species requires an understanding of element absorption and distribution patterns in relation to variable composition of bedrock and associated underlying gold mineralization.

The dissertation reviews the present knowledge regarding diamonds, from its formation in the lithospheric upper mantle at depths between 150 and 300 km, to its final valuation in terms of US$/carat by diamantaires in London, Antwerp, Tel Aviv and New York. The dissertation is divided into two complimentary sections. Section one focuses on the formation, emplacement, occurrence and characteristics of kimberlites and, when present, their associated trace amounts of diamonds. The section follows a logical sequence from the regional tectonic-, local structrual- and geodynamic controls on kimberlite formation and emplacement to the characteristics of individual kimberlite morphology, mineralogy, petrography and geochemistry. Finally, the environment or diamond formation, resorption and the characteristics that have led to the marketability of diamonds are discussed. Section two reviews the current exploration techniques used in locating diamondiferous kimberliies and the subsequent economic evaluation of these kimberlites. A brief history of known Southern African kimberlite occurrences, grades, tonnages, tectonic settings, ages and regional structural controls is given. The prospective countries mentioned are Angola, Botswana, Lesotho, South Africa, Swaziland, Tanzania and Zimbabwe. Exploration techniques considered are ; the application of a landscape analysis and investigation of the surface processes active in a given area, indicator mineral sampling (with reference to their mineralogy and exploration significance), remote sensing techniques (subdivided into satellite imagery and aerial photography), geophysical techniques (including the magnetic-, gravity-, electrical-, radiometric- and seismic methods as well as heat flow models), geochemical techniques, petrographic- and electron beam techniques as well as geobotanical- and geobiological techniques. Finally, a brief summary of current evaluation techniques employed on diamondiferous kimberlite deposits is presented. The review covers kimberlite sampling methods, sample processing, diamond grade distributions (with reference to the experimental variogram model, statistical methods used in grade distribution calculations as well as block definition and local grade estimation). Stone size distributions, including microdiamond counts and value estimation, are also discussed. / KMBT_363 / Adobe Acrobat 9.54 Paper Capture Plug-in

A dissertation submitted to the Faculty of Science, University of the Witwatersrand, Johannesburg, in fulfilment of the requirements for the degree of Master of Scieuce in Geophysics . / Rockbursts continue to be one of the more high profile and problematic worker hazards in the South African gold mining industry. Recent advances in the technology of seismic monitoring systems and seismic data analysis and interpretation methods hold considerable promise towards improving the success rate of rockburst control measures. This study tests different methods for the evaluation of the response of geological structures to mining induced stress changes. A small part of Western Holdings Gold Mine in the Welkom goldfield -- the Postma Area -- offers a challenge because of its geological complexity, accessibility and high incidence of seismicity. The sensitivity of the local network to ground motions in this area of interest and the expected spatial location accuracy is established and deemed adequate for a detailed investigation of seismic activity. The local mining geometry, geology and methods of mining are discussed. The fractured state of the rock mass observed in situ, close to the stope faces, is in agreement with the results of numerical elastic modelling and the high stresses inferred seismically. Almost immediately after the incidence of a large event (ML 3.7) which occurred close to one end of a dyke, an increased rate of seismic activity became apparent at another part of the same dyke, some 250 m to the east. A change in the state of seismic stress, before and after the large event, points to a transfer of stress along this geological discontinuity. A quantitative analysis of recorded seismicity indicates spatial and temporal variations in the state of stress and strain throughout the rock mass surrounding Mining excavations. The elastic stress modelling performed routinely by rock mechanics engineers in the deep gold mines is, by itself, incapable of catering for the rheological nature of the rock mass, but taken together with independent seismic evaluations of a fault orthogonal to a highly stressed dyke it is shown that both methods are mutually complementary and can enhance the assessment of the seismic instability of the structures. A back-analysis is conducted on ten large seismic events (ML> 2.5) to identify precursors. These show that the timely recognition of high gradients in physical seismic parameters pertaining to strain rate and stress in time and space immediately prior to major seismic events is a real and practical possibility, as such constituting an early warning mechanism. The fore-warning of a large event is best served by an analysis of seismicity over the short term (weeks or days) through time-history variations and/or contouring of various seismic parameters, although long-term seismic responses (months or weeks) characterise specific patterns and trends which are useful in the forecast. / AC2018

A dissertation submitted to the Faculty of Science, University of the Witwatersrand, Johannesburg, in fulfilment of the requirements for the degree of Master of Science in Geophysics . / Rockbursts continue to be one of the more high profile and problematic worker hazards in the South African gold mining industry. Recent advances in the technology of seismic monitoring systems and seismic data analysis and interpretation methods hold considerable promise towards improving the success rate of rockburst control measures. This study tests different methods for the evaluation of the response of geological structures to mining induced stress changes. A small part of Western Holdings Gold Mine in the Welkom goldfield -- the Postma Area -- offers a challenge because of its geological complexity, accessibility and high incidence of seismicity. The sensitivity of the local network to ground motions in this area of interest and the expected spatial location accuracy is established and deemed adequate for a detailed investigation of seismic activity. The local mining geometry, geology and methods of mining are discussed. The fractured state of the rock mass observed in situ, close to the stope faces, is in agreement with the results of numerical elastic modelling and the high stresses inferred seismically. Almost immediately after the incidence of a large event (ML 3.7) which occurred close to one end of a dyke, an increased rate of seismic activity became apparent at another part of the same dyke, some 250 m to the east. A change in the state of seismic stress, before and after the large event, points to a transfer of stress along this geological discontinuity. A quantitative analysis of recorded seismicity indicates spatial and temporal variations in the state of stress and strain throughout the rock mass surrounding Mining excavations. The elastic stress modelling performed routinely by rock mechanics engineers in the deep gold mines is, by itself, incapable of catering for the rheological nature of the rock mass, but taken together with independent seismic evaluations of a fault orthogonal to a highly stressed dyke it is shown that both methods are mutually complementary and can enhance the assessment of the seismic instability of the structures. A back-analysis is conducted on ten large seismic events (ML 2.5) to identify precursors. These show that the timely recognition of high gradients in physical seismic parameters pertaining to strain rate and stress in time and space immediately prior to major seismic events is a real and practical possibility, as such constituting an early warning mechanism. The fore-warning of a large event is best served by an analysis of seismicity over the short term (weeks or days) through time-history variations and/or contouring of various seismic parameters, although long-term seismic responses (months or weeks) characterise specific patterns and trends which are useful in the forecast. / AC 2018

No description available.

This study involves the application, interpretation and utilization of regional geochemical data for target generation in the North West Province, South Africa. A regional soil geochemical survey programme has been carried out by the Council of Geoscience South Africa since 1973. A number of 1:250 000 sheet areas have been completed, but there are no interpretative maps which could aid in mineral exploration and other purposes. In order to utilize the valuable and expensive data, the project was motivated through data acquisition and interpretation to generate exploration targets. The study area is confined to Mafikeng, Vryburg, Kuruman and Christiana in the Northwest Province, where potential exploration and mining opportunities exist in areas of great geological interest. These include geological events such as the Bushveld Complex, the Kalahari manganese field and the Kraaipan greenstone belts. The aim of this project was to utilize geochemical data together with geophysical and geological information to verify and identification of possible obscured ore bodies or zones of mineralization, and to generate targets. Another objective was the author to be trained in the techniques of geochemical data processing, interpretation and integration of techniques such as geophysics, in the understanding of the geology and economic geology of the areas. Approximately 5 kg of surface soil was collected per 1 km2 by CGS from foot traversing. Pellets of the samples were prepared and analyzed for TiO2, MnO and Fe2O3, Sc, V, Cr, Ni, Co, Cu, Zn, As, Y, Ba, Nb, Rb, Th, W, Zr, Pb, Sr and U using the simultaneous wavelengthdispersive X-ray fluorescence spectrometer technique at the Council for Geoscience, South Africa. For each element the mean +2 standard deviations were used as a threshold value to separate the negative from the positive anomalies. The integration of geological, geophysical and geochemical information was used to analyze and understand the areas of interest. A number of computer programmes were extensively used for data processing, manipulation, and presentation. These include Golden Software Surfer 8®, Arc-View 3.2a®, TNT-Mips®, JMP 8 ®, and Microsoft Excel®. Through geochemical data processing and interpretation, together with the low resolution aeromagnetic data, gravity data and geological data, seven (7) exploration target areas have been generated: These have been numbered A to G. It is concluded that there is good potential for Cr, PGMs, vanadium, nickel, iron, copper, manganese, uranium and niobium in the targets generated. The results provide some indication and guide for exploration in the target areas. In Target A, Cu, Cr, Fe, Ni and V anomalies from the lower chromitite zone of far western zone of the Bushveld Complex, which has be overlain buy the thick surface sand of the Gordonia Formation. Target B occurs over the diabase, norite, andesitic lava and andalusite muscovite hornfels of the Magaliesberg Formation. This target has the potential for Cu, Fe and Ni mineralization. The felsic rocks of the Kanye Formation and the Gaborone Granite in target C have shown some positive anomalies of niobium, uranium, yttrium and rubidium which give the area potential for Nb, REE and U exploration. Target D is located on the Allanridge Formation, and has significant potential for Ni-Cu mineralization, and is associated with the komatiitic lava at the base of the Allanridge Formation in the Christiana Area. The light green tholeiitic, calc-alkali basalt and andesitic rocks of the Rietgat Formation are characterized by a north-south trending yttrium anomaly with supporting Ba and Y anomalies (Target E). This makes the area a potential target for rare earth elements. Calcrete on the west of the Kuruman has a low b potential target for vanadium. It is believed that the area might be potential for potassium-uranium vanadate minerals, carnotite which is mostly found in calcrete deposits. This study has proved to be a useful and approach in utilizing the valuable geochemical data for exploration and future mining, generated by Council for Geoscience Science. It is recommended that further detailed soil, rock and geochemical surveys and ultimately diamond drilling be carried out in the exploration target areas generated by this study.

Magister Scientiae - MSc / The Morokweng impact structure which is located in the North West province of South Africa, has attracted attention as a potential host for Ni-PGE mineralization. Geochemical exploration techniques using hydroxylamine partial extraction were used to determine the nature and source of surface geochemical anomalies known to occur in the overlying aeolian sang regolith. About 40 aeolian samples were taken from an area of about 35 square kilometer, located in the north eastern sector of the Morokweng impact structure. The samples were sieved to various grain size fractions and partially extracted using varying concentration of hydroxylamine hydrochloride at 50° / South Africa

Three hybrid moment tensor inversion methods were developed for seismic sources originating from a small source region. These techniques attempt to compensate for various types of systematic error (or noise) that influence seismograms recorded in the underground environment in order to achieve an accurate and robust measure of the seismic moment tensor. The term 'hybrid' was used to distinguish between the relative method proposed by Dahm (1995) and the methods developed in this thesis. The hybrid methods were essentially weighting schemes designed to enhance the accuracy of the computed moment tensors by decreasing the influence of any low quality observations, to damp (or amplify) any signals that have been overestimated (or underestimated) due to local site effects, and to correct for raypath focussing or defocussing that results from inhomogeneities in the rockmass. The weighting or correction applied to a particular observation was derived from the residuals determined when observed data were compared with corresponding theoretical data (for a particular geophone site, sensor orientation and wave phase) and were calculated using a cluster of events rather than a single event. The first and second weighting schemes were indirectly related to the mean and the median of the residuals where the residuals were defined as the ratio of the theoretical to observed data. In the third scheme, the residuals were defined as the difference between the observed and theoretical data and the weights were based on the distance of a data point (measured in standard deviations) from the mean residual. In each of the weighting schemes, the correction was applied iteratively until the standard error of the least-squares solution (normalised to the scalar seismic moment) was a minimum. The schemes were non-linear because new weights were calculated for each iteration. A number of stability tests using synthetic data were carried out to quantify the source resolving capabilities of the hybrid methods under various extreme conditions. The synthetic events were pure double-couple sources having identical fault-plane orientations, and differing only in rake. This similarity in the mechanisms was chosen because the waveforms of tightly grouped events recorded underground often show high degrees of similarity. For each test, the results computed using the three hybrid methods were compared with one another and with those computed using the single event, absolute method and two relative methods (with and without a reference mechanism). In the noise-free situation, it was found that the relative method without reference mechanism showed the highest resolution of mechanisms, provided that the coverage of the focal sphere was not too sparse (> 3 stations). The hybrid method using a median correction was found to be the most robust of all the methods tested in the most extreme case of poor coverage (2 stations) of the focal sphere. When increasing levels of pseudo-random noise were applied to the data, the absolute moment tensor inversion method, the hybrid method using a median correction, and the hybrid method using a weighted mean correction all showed similar robustness and stability in extreme configurations concerning network coverage of the focal sphere and noise level. When increasing levels of systematic noise were added to the data, the hybrid methods using a median correction and weighted mean correction were found to exhibit similar robustness and stability in extreme configurations concerning network coverage of the focal sphere and systematic noise. In all situations investigated, these two hybrid methods outperformed the relative and absolute methods. The hybrid moment tensor inversion methods using a median and weighted mean correction were applied to a cluster of 14 events, having remarkably similar waveforms, recorded at Oryx Gold Mine. For comparative purposes, the absolute method was also applied. The inputs to the inversion methods consisted of the spectral plateaus of both P- and S-waves at frequencies below the comer frequency of the time-integrated displacement traces. The polarities of dominant motion were used as an additional constraint and were determined from cross-correlation of observed with synthetic P- or S-waves. The solutions computed using the hybrid moment tensor inversion using a median correction displayed a distinct improvement after the iterative residual correction procedure was applied. The radiation patterns and faultplane solutions showed a high degree of similarity, and are probably more accurate reflections of reality than those computed using the absolute moment tensor inversion methods. These observations are very encouraging and point towards the method's potential for use as a standard processing tool for mine seismicity. The implications of this work are a better understanding of the focal mechanisms of seismic events induced by mining activities, ultimately leading to improved safety underground.

The Mount Ayliff Complex (MAC) is situated on the border between Kwa-Zulu Natal and the Eastern Cape provinces in the Republic of South Africa, approximately 90 km due west of Port Shepstone. The Complex forms part of the Karoo Igneous Province and includes five lobes (Ingeli, Insizwa, Tonti, Tabankulu, and Horseshoe) that are the remnants of a single continuous intrusive sheet that had an original extent of 18,000km2• The current outcrop is estimated at 800km2• The lobes all show extensive internal differentiation, from basal ultramafic cumulates to diorites and monzonites at the top, while most other intrusions in the Karoo Igneous Province cooled rapidly enough to produce relatively homogenous dolerites. Most work conducted on the Complex thus far has centered on the Insizwa lobe due to the presence of a Ni-sulphide occurrence near the base of the lobe at Waterfall Gorge. The setting of the ores has analogies to the Noril'sk-Talnakh deposits, which has raised considerable exploration interest on the Mount Ayliff Complex over the last century. The current study investigates the Ni-Cu sulphide potential of the Ingeli and Horseshoe lobes, which have been poorly studied in the past. To this effect, a stream sediment survey was conducted around the Ingeli lobe to try and detect potentially hidden magmatic sulphide ores. Further, the five lobes of the Complex have been compared in terms of lithology and lithogeochemistry. Analytical techniques used for the current study include: XRF, ICP-MS and electron microprobe. Stream sediment samples were analysed using XRF and ICP-OES. Olivines from the ultramafic cumulates of the Ingeli and Insizwa lobes are undepleted in Ni, whereas olivines from the Horseshoe and Tabankulu lobes are strongly depleted in Ni. This suggests that the rocks of the latter two lobes crystallized from parental magmas that interacted with a sulphide liquid and that the magmatic flow direction was from the north to the south. The data indicate that the ultramafic rocks of the Complex plot on or near control lines between olivine and Karoo dolerite indicating that the rocks are mixtures of cumulus olivine and trapped melt of Karoo dolerite composition. There appears to be a copper enrichment towards the top of the ultramafic package in the Ingeli lobe. This pattern corresponds to other studies conducted in the InsiZWa lobe and suggests that the two lobes had originally been connected. The lowermost cumulates of the Ingeli lobe contain an enhanced crustal component suggesting some in situ contamination. No significant sulphide enrichments were encountered in the Basal Zone rocks of the Ingeli lobe. However, the stream sediment data indicate localized PGE enrichment indicating the possible presence of a localized hidden sulphide occurrence of the type found at Waterfall Gorge. Small amounts of sulphides were found associated with the Basal Zone rocks in the Horseshoe lobe consistent with the trends of Ni-depletion of olivines. However, a lack of Co depletion in the ultramafic rocks of this lobe suggests that any sulphide segregation event that did take place was of a relatively small scale. / Dissertation (MSc)--University of Pretoria, 2006. / Geology / MSc / Unrestricted