The genetic code of all known organisms is comprised of the 20 proteinogenic amino acids that serve as building blocks on a peptide chain to form a vast array of proteins. Proteins are responsible for virtually every biological process in all organisms; however, the 20 amino acids contain a limited number of functional groups that often leaves much to be desired. The lack of diversity addresses the need to increase the genetic repertoire of living cells to include a variety of amino acids with novel structural, chemical, and physical properties not found in the common 20 amino acids. In order to expand the chemical scope of the genetic code beyond the functionalities that can be directly genetically encoded, unnatural amino acids must be added to the proteome. The ability to incorporate unnatural amino acids (UAAs) into proteins at defined sites has a direct impact on the ability of scientists to study biological processes that are difficult or impossible to address by more classical methods. The UUAs of interest are acylated lysine derivatives (isovaleryl, isobutyryl, and β-hydroxybutyryl) and photocaged histidine. Acylation of histone lysine has been linked to epigenetic regulation of metabolism.1 A means to site-specifically incorporate each acylated lysine derivative would help study the effect of acylated lysine in epigenetic regulation. Likewise, in order to elucidate the role of histidine in specific protein functions, one can replace a critical histidine with a photocaged histidine. Photocaged amino acids are those that possess a photo-cleavable, aromatic caged group. Light-induced protein activation allows for the biological activity of the protein to be spatiotemporally regulated under non-invasive external control.2 The site-specific in vivo incorporation of unnatural amino acids is made possible by amber codon suppression by an orthogonal suppressor aminoacyl-tRNA synthetase (aaRS)/tRNA pair.3 In amber codon suppression the amber stop codon is decoded for an UAA by a suppressor aaRS/tRNA pair. To accept the UAA, the aaRS must be evolved to achieve orthogonal activity with specific UUAs. The pyrrolysyl aaRS/tRNA (PylRS/PylT) pair from M. barkeri and M. mazei was used to construct multiple, large-scale aaRS mutant libraries where critical residues within the active site of PylRS are mutated via site-saturated mutagenesis.4 The libraries were subjected to directed evolution through a series of positive and negative selections to enrich aaRS variants that exclusively bind to acylated lysine derivatives and photocaged histidine as substrates.5 The PylRS selection survivors were screened for UAA activity and identified successful clones underwent a fluorescent activity assay. The active aaRS were used for amber codon suppression to express the respective UAA in ubiquitin and green fluorescent protein constructs.

B and T cells comprise the two major arms of the adaptive immune response tasked with clearing and preventing infection; molecular recognition in these cells occurs through antibodies and T cell receptors (TCRs), respectively. Highly successful therapeutics, clinical diagnostics and laboratory tools have been engineered from fragments of these parent molecules. The binding specificity, affinity and biophysical characteristics of these fragments determine their potential applications and resulting efficacies. Thus engineering desired properties into antibody and TCR fragments is a major concern of the multi-billion dollar biopharmaceutical industry. Toward this goal, we (1) designed antibody specificity using a novel computational method, (2) engineered thermoresistant Fabs by phage-based selection and (3) modulated binding kinetics for a single-chain TCR. In the first study, de novo modeling was used to generate libraries of FLAG peptide-binding single-chain antibodies. Phage-based screening identified a dominant design, and activity was confirmed after conversion to soluble Fab format. Bioinformatics analysis revealed potential areas for design process improvement. We present the first experimental validation of this in silico design method, which can be used to guide future antibody specificity engineering efforts. In the second study, the variable heavy chain of a moderately stable EE peptide-binding Fab was subjected to random mutagenesis, and variants were selected for resistance to heat inactivation. Thermoresistant clones where biophysically characterized, and structural analysis of selected mutations suggested general mechanisms of stabilization. Framework mutations conferring thermoresistance can be grafted to other antibodies in future Fab stabilization work. In the third study, TCR fragment binding kinetics for a clonotypic antibody were modulated by varying valence during phage-based selection. Binding affinity and kinetics for representative variants depended on the display format used during selection, and all TCR fragments retained binding to native pMHC antigen. This work demonstrates a general engineering platform for tuning protein-protein interactions. Using a combination of computational design and phage-based screening, we have identified antibodies and TCR fragments with improved binding properties or biophysical characteristics. The optimized variants possess a wider range of potential applications compared to their parent molecules, and we detail engineering methods likely to be useful in the engineering of many other protein-based therapeutics. / text

The family 1 cellulose-binding modules (CBM1) form a groupof small, stable carbohydrate-binding proteins. These modulesare essential for fungal cellulosedegradation. This thesisdescribes both functional studies of the CBM1s as well asprotein engineering of the modules for several objectives. The characteristics and specificity of CBM1s from theTrichoderma reeseiCel7A and Cel6A, along with severalother wild type and mutated CBMs, were studied using bindingexperiments and transmission electron microscopy (TEM). Datafrom the binding studies confirmed that the presence of onetryptophan residue on the CBM1 binding face enhances itsbinding to crystalline cellulose. The twoT. reeseiCBM1s as well as the CBM3 from theClostridium thermocellumCipA were investigated by TEMexperiments. All three CBMs were found to bind in lineararrangements along the sides of the fibrils. Further analysesof the bound CBMs indicated that the CBMs bind to the exposedhydrophobic surfaces, the so called (200) crystalline face ofValoniacellulose crystals. The function and specificity of CBM1s as a part of an intactenzyme were studied by replacing the CBM from the exo-actingCel7A by the CBM1 from the endoglucanase Cel7B. Apart fromslightly improved affinity of the hybrid enzyme, the moduleexchange did not significantly influence the function of theCel7A. This indicates that the two CBM1s are analogous in theirbinding properties and function during cellulosehydrolysis. The CBM1 was also used for immobilization studies. Toimprove heterologous expression of a CBM1-lipase fusionprotein, a linker stability study was carried out inPichia pastoris. A proline/threonine rich linker peptidewas found to be stable for protein production in this host. Forwhole bacterial cell immobilization, theT. reeseiCel6A CBM1 was expressed on the surface of thegram-positive bacteria,Staphylococcus carnosus. The engineeredS. carnosuscells were shown to bind cellulosefibers. To exploit the stable CBM1 fold as a starting point forgenerating novel binders, a phage display library wasconstructed. Binding proteins against an amylase as well asagainst a metal ion were selected from the library. Theamylase-binding proteins were found to bind and inhibit thetarget enzyme. The metal binding proteins selected from thelibrary were cloned on the surface of theS. carnosusand clearly enhanced the metal bindingability of the engineered bacteria. <b>Keywords</b>: cellulose-binding, family 1carbohydrate-binding module, phage display, bacterial surfacedisplay, combinatorial protein library, metal binding, proteinengineering,Trichoderma reesei, Staphyloccus carnosus.

<p>The family 1 cellulose-binding modules (CBM1) form a groupof small, stable carbohydrate-binding proteins. These modulesare essential for fungal cellulosedegradation. This thesisdescribes both functional studies of the CBM1s as well asprotein engineering of the modules for several objectives.</p><p>The characteristics and specificity of CBM1s from the<i>Trichoderma reesei</i>Cel7A and Cel6A, along with severalother wild type and mutated CBMs, were studied using bindingexperiments and transmission electron microscopy (TEM). Datafrom the binding studies confirmed that the presence of onetryptophan residue on the CBM1 binding face enhances itsbinding to crystalline cellulose. The two<i>T. reesei</i>CBM1s as well as the CBM3 from the<i>Clostridium thermocellum</i>CipA were investigated by TEMexperiments. All three CBMs were found to bind in lineararrangements along the sides of the fibrils. Further analysesof the bound CBMs indicated that the CBMs bind to the exposedhydrophobic surfaces, the so called (200) crystalline face of<i>Valonia</i>cellulose crystals.</p><p>The function and specificity of CBM1s as a part of an intactenzyme were studied by replacing the CBM from the exo-actingCel7A by the CBM1 from the endoglucanase Cel7B. Apart fromslightly improved affinity of the hybrid enzyme, the moduleexchange did not significantly influence the function of theCel7A. This indicates that the two CBM1s are analogous in theirbinding properties and function during cellulosehydrolysis.</p><p>The CBM1 was also used for immobilization studies. Toimprove heterologous expression of a CBM1-lipase fusionprotein, a linker stability study was carried out in<i>Pichia pastoris</i>. A proline/threonine rich linker peptidewas found to be stable for protein production in this host. Forwhole bacterial cell immobilization, the<i>T. reesei</i>Cel6A CBM1 was expressed on the surface of thegram-positive bacteria,<i>Staphylococcus carnosus</i>. The engineered<i>S. carnosus</i>cells were shown to bind cellulosefibers.</p><p>To exploit the stable CBM1 fold as a starting point forgenerating novel binders, a phage display library wasconstructed. Binding proteins against an amylase as well asagainst a metal ion were selected from the library. Theamylase-binding proteins were found to bind and inhibit thetarget enzyme. The metal binding proteins selected from thelibrary were cloned on the surface of the<i>S. carnosus</i>and clearly enhanced the metal bindingability of the engineered bacteria.</p><p><b>Keywords</b>: cellulose-binding, family 1carbohydrate-binding module, phage display, bacterial surfacedisplay, combinatorial protein library, metal binding, proteinengineering,<i>Trichoderma reesei, Staphyloccus carnosus</i>.</p>