Maxwell&rsquo / s thought experiment on a demon performing microscopic actions and violating the second law of thermodynamics has been a challenging paradox for a long time. It is finally resolved in the seventies and eighties by using Landauer&rsquo / s principle, which state that erasing information is necessarily accompanied with a heat dumped to the environment. The purpose of this study is to describe the heat dumped to the environment associated with erasure operations on quantum systems. To achieve this, first a brief introduction to necessary tools like density matrix formalism, quantum operators and entropy are given. Second, the Maxwell&rsquo / s demon and Szilard model is described. Also the connection between information theory and physics is discussed via this model. Finally, heat transfer operators associated with quantum erasure operations are defined and all of their properties are obtained.

In this study, effects of changes in various parameters of the Bayer process on the amount of &ldquo / red mud&rdquo / , which has many environmental drawbacks, were examined in accordance with the principles of &ldquo / sustainable development&rdquo / . The production process of SeydiSehir Aluminum Plant is modeled as a case study. First a steady-state mass balance calculation is carried out by incorporating sequential modular approach. Then a model of the Bayer process digester is programmed and several simulations are carried out using this model. Results of the mass balance calculation revealed that changes in the extent of the digestion reaction, which is a function of temperature and caustic concentration, and washing efficiency may have a 2.07% decrease on the amount of red mud produced,which implies nearly 10,000 tons of decline per annum, while amount of hydrate produced is increased by 4.52%. A 7.40 % decrease on the amount of red mud produced on dry basis per kg of hydrate was found to be achievable. Optimum operating temperature for the digester was calculated as 277.3 &deg / C.

We study in this thesis work the spectroscopic and thermodynamic quantities of some substances such as ammonium halides (NH4Cl, NH4I), ferroelectric crystals of tris-sarcosine calcium chloride (TSCC), tris-sarcosine calcium bromide (TSCB), organic compounds of carbon tetrachloride (CCl4) and s-triazine (C3N3H3) close to the phase transitions. Various physical and chemical properties of those materials have been measured near the critical points and have been reported in the literature. In this study, the spectroscopic parameters of the frequency shifts, intensity and bandwidths are calculated as functions of temperature or pressure near the phase transitions in ammonium halides using the experimental data from the literature. The spectroscopic parameters are related to the crystal volume and the specific heat in these compounds. The thermodynamic quantities of the specific heat, thermal expansion and the isothermal compressibility are also calculated in the solid and liquid phases of carbon tetrachloride using the experimental data. In another part of this thesis work, we analyze the temperature dependence of the spontaneous polarization and the dielectric susceptibility at fixed pressures for TSCC and TSCB by using the experimental data from the literature. The temperature dependence of the damping constant for the s-triazine is also calculated here close to the I-II transition. We use the theoretical models on the basis of the observations in the literature to calculate the critical behaviour of these physical quantities and we compare the results with the observed data. Various experimental studies in the literature give us the opportunity to find the proper way of fitting the calculated and observed results. This study gives us the chance of a better understanding of the critical behavior of the studied materials by verifying the values of some critical exponents and the types of transitions as expected by different theoretical models.

Solar assisted single-stage absorption heat pump (AHP) was used to supply energy to a floor-heating system by using the exergy methods. An existing duplex-house,in Ankara, with a heating load of 25.5 kW was analysed. Heating loads of the spaces in the building were calculated and a floor heating panel was modelled for each space leading to the capacity of the AHP before it was designed. Solar energy was delivered to the evaporator and high temperature heat input delivered to the genarator are met by auxiliary units operating with natural gas.The solar energy gained by flat-plate collectors was circulated through AHP.The anaysis performed according to the storage tank temperature reference value if the water temperature leaving the storage tank exceeds a predetermined value it is directly circulated through the floor heating system. Exergue analysis were carried out with Mathcad program. Exergy analysis showed that irreversibility have an impact on absorption system performance.This study indicated which components in the system need to be improved thermally.A design procedure has been applied to a water-lithium-bromide absorption heat pump cycle and an optimisation procedure that consists of determinig the enthalpy, entropy ,exergy, temperature, mass flow rate in each component and coeficient of performance and exergetic coefficient of performance has been performed and tabulated.

The objective of this study is to analyze theoretically the laminar film condensation of water vapor flowing on a sphere. For this purpose, the problem was handled by including all of the two-phase boundary layer parameters such as gravity, effect of vapor shear, inertia, energy convection and pressure gradient. For this full two-phase boundary layer system, the boundary layer equations, boundary conditions and the interfacial conditions were first analyzed, and then discretized. A computer program in Mathcad, solving these discretized equations, was written to obtain the velocity and temperature profiles within the condensate, the velocity profiles within the vapor, the condensate film thickness and the local Nusselt number. The effects of pressure gradient, gravity, vapor oncoming velocity and sphere radius on these parameters were examined. By alternating the formulation of the problem, the results for the flow over a horizontal cylinder were obtained. These results were then compared with those for the sphere. Finally, the results for the system with Mercury vapor flowing on a sphere were obtained. All of these results were represented as diagrams and tables, and were discussed at the end of the study.

This thesis analyzes the nonextensive generalization of Boltzmann-Gibbs statistics and study its applications to some physical models such as isotropic rigid and non-rigid rotators. The thesis will also try to show what kind of internal energy constraint must be chosen for entropy optimization in a mathematically consistent manner.