I present photonics applications of PbS quantum-dot-doped (QD-doped) glasses. The dissertation consists of two major parts: bulk material applications (Cr:forsterite laser modelocking, bleaching dynamics, optical gain, and photoluminescence) and the fabrication of QD-doped ion-exchanged waveguides.When this work began, these PbS QD-doped glasses were the state-of-the-art in QD glasses due to their narrow size distribution. Modelocking of a Cr:forsterite laser using this glass as a saturable absorber had been demonstrated, with little understanding of the dynamics. This work began by studying the dynamics of the saturable absorber to explain the ps-pulse width.In the bulk measurements, I functioned as secondary researcher. In the laser modelocking and bleaching measurements, my contribution was laser cavity alignment, sample preparation, collecting autocorrelation traces, and aiding in the setup and data collection for the bleaching measurements. On this work, I coauthored one refereed journal article in Applied Physics Letters [1] and one refereed conference paper [2], for which I am third and second author, respectively.For the gain measurements, I aided in the setup and data collection, whereas I set-up and took most of the luminescence data. The gain measurements resulted in one second-author refereed journal article in Applied Physics Letters [3] and I presented the luminescence results at CLEO2000 [4].I took the lead role in the waveguide fabrication and characterization and authored refereed journal articles in Applied Physics Letters [5], Journal of Applied Physics [6], and Journal of the Optical Society of America B [7]. I also presented an invited talk at Photonics West [8] and presented at CLEO2004 [9]. Additionally, I have been a coauthor of presentations at the Nanotechnology Symposium (2006), American Ceramic Society [10], and Photonics Europe (2006) [11]. A book chapter in The Photonics Handbook, 2nd edition [12] also discusses this work.The next step is to focus on reducing the waveguide losses. This requires new, circular wafers with better surface quality and glass homogeneity. I suggest using silver-film ion exchange followed by a field-assisted burial to eliminate the surface interaction.