The motivation of this research is to meet the growing demand for the measurand high-resolution, high-spatial resolution, attenuation insensitive and low-cost quasi-distributed temperature and strain sensors that can reliably work under harsh environment or in extended structures. There are two main drives for distributed fiber sensor research. The first is to lower cost-per-sensor so that the fiber sensors may become price-competitive against electrical sensors in order to gain widespread acceptance. The second is to obtain spatial distribution of the measurand. This dissertation presents detailed research on the design, modeling, analysis, system implementation, sensor fabrication, performance evaluation, sensor field test and noise analysis of a quasi-distributed intrinsic Fabry-Perot interferometric (IFPI) fiber sensor suitable for temperature and strain measurement. For the first time to our knowledge, an IFPI sensor using a different type of fiber spliced in between two single-mode fibers is proposed and tested. The proposed sensor has high measurement accuracy, excellent repeatability, a large working range and a low insertion-loss. It requests no annealing after the sensor is made, and the sensor is calibration-free. The sensor fabrication is low-cost and has a high yield rate. The goal for this research is to bring this sensor to a level where it will become commercially viable for quasi-distributed sensing applications. / Ph. D.

Structural health monitoring (SHM) has become a strong national interest because of the need of reliable and accurate damage detection methods for aerospace, civil and mechanical engineering infrastructure. Health monitoring of these structures usually requires the sensors to have such features as large area coverage, maintenance free or minimum maintenance, ultra-low cost per measurement point, and capability of operation in harsh environments. Fiber Bragg grating (FBG) has attracted considerable interest for this application because of its compactness, electromagnetic immunity, and excellent multiplexing capability. Several FBG multiplexing techniques have been developed to increase the multiplexing number and further reduce the unit cost. To the author's best knowledge, the current demonstrated maximum multiplexing number are 800 FBG sensors in a single array using optical frequency domain reflectometry (OFDR), whose maximum fiber span is limited by the coherence length of light source. In this work, we proposed and demonstrated a wavelength-scanning time-division multiplexing (WSTDM) of 1000 ultra-weak FBGs for distributed temperature sensing. In comparison with the OFDR method, the WSTDM method distinguishes the sensors by different time delays, and its maximum operation distance, which is limited by the transmission loss of the fiber, can be as high as tens of kilometers. The strong multiplexing capability and low crosstalk of the ultra-weak FBG sensors was investigated through both theoretical analysis and experiment. An automated FBG fabrication system was developed for fast FBG fabrication. With this WSTDM method, we multiplexed 1000 ultra-weak FBGs for distributed temperature sensing. Besides the demonstrated temperature measurement, the reported method can also be applied to measure other parameters, such as strain, pressure. / Ph. D.