The diploma thesis is about design and project documentation of fitness and wellness center. The designed object is situated in the outskirts of Havlíčkův Brod in a quiet environment and with direct connection to the city dam. The object is a three-storey partially-basement building with a flat green roof in three levels. The building is based on the base passages of plain concrete, reinforced concrete slabs and beads. The supporting, peripheral and partition walls are designed from the VELOX system. The outer casing consists of cement slab, reinforced concrete core and thermal insulation. In open-plan areas there are designed reinforced concrete columns. The ceiling structure is predominantly designed from reinforced concrete slabs to lost formwork. Part of the facade is plastered, the other part is ventilated. Individual architectural elements divide the object into units and fit into the natural landscape. The object is divided into several tracts where each has its own purpose and specification. In the 1st floor there is a gym, room for trainers and coordinating training room. In the center there is atrium, reception, cloakroom, buffet and public toilets. Vertical communication is possible using a suspended staircase or a hydraulic lift. On the 1st underground floor there is a reception desk and cloakroom for disabled people. In the western part of the tract there is an indoor pool with whirlpool, of course there are cloakrooms divided for men and women. The eastern part of the tract is used as a technical room of air-conditioning, there are also 3 saunas, including a relaxation room and dressing room. All facilities on the 1st underground floor have access to an outdoor park, including a dam and outdoor whirlpools. In the 2nd floor there is a staffing facility, an area for manegement, technical rooms and an outdoor green terrace. The designed object is designed for disabled people. Around the object there is designed a car park for 33 cars.

Thesis Theme is a primary school, namely the outbuilding primary school Havlíčkův Brod, Konečná 1884. I suggest first grade pavilion and pavilion with school canteen with kitchens. Pavilions are based on the footings. Pavilions are designed as a two-way system from the wall HELUZ. Construction of ceiling are from ferroconcrete slabs are cross reinforced, single-layer roof is flat with a classic sequence of layers. In addition to construction and process layout I solved also the statics of building in specialize of concrete structures. The following are also evaluated heat and acoustic requirements and requirements for fire safety of buildings. New pavilions are solved as wheelchair accessible. Pavilion of the first grade has two floors with 5 classes of stem, 1 vocational and 2 classes are earmarked for after-school clubs. This pavilion is connected to the connecting neck between the former pavilon A and pavilion B. Dining pavilion has one floor, which is divided in the school canteen and kitchen is connected to the connecting neck leading to the gym. The land is mildly sloping to the south side. All consstructions comply with the applicable standards and recommendations ČSN.

The Diploma’s thesis is focused on the design of selected parts of reinforced concrete exhibition hall (prestressed concrete purlin, prestressed concrete girder, reinforced concrete column, reinforced concrete footing, post-tensioned concrete girders). The load calculation (the self weight, the permanent load, the wind load, the snow load and imposed load), the design and the review of selected reinforced concrete items and the drawing documentation are included in this thesis.

The thesis deals with Komenského Street sports hall construction in Lysá nad Labem. Although partially dealing with construction of all parts, in detail it studies gym construction, focusing on time management, technology and resources of implementation. The thesis is divided into the drawing and text parts. The former includes site facilities design and building situation. The latter consists of the main part construction project implementation study, itemized budget, time schedule, technological regulations, inspection and testing plan for the implementation of the main construction part 1st floor reinforced concrete columns and walls, construction machines and mechanisms design as well as time and financial schedule.

The final thesis is focused on the design and elaboration of the project documentation of the sports and relaxation center. The proposed building is located in the south-eastern part of the town of Hradec Králové, in a location supposed for buildings and areas of sports and relaxation use. It is a three-storey building with a flat roof and partial basement. The construction system is wall-mounted with a combination of skeleton. The building is based on plain concrete and reinforced concrete foundation footing. The peripheral, supporting and partition walls are designed from ceramic blocks POROTHERM. The inner load-bearing elements consist mainly of reinforced concrete columns. The ceiling structure is designed from reinforced concrete slabs supported locally. The perimeter walls of the first overground floor and part of the perimeter walls of the basement are insulated by an external contact thermal insulation system. The thermal insulation of the perimeter walls of the second floor is designed by means of a ventilated facade with facade tiles except the squash courts and the relaxation area. The building is functionally divided into three main parts, where the central part forms an entrance hall with comunication spaces of all floors. In this part a basement with technical facilities is designed. The right part of the ground floor consists of a restaurant with a bowling alley and a kitchen with storage and hygienic facilities. As part of this section, a gym and exercise rooms for fitness exercises, spinning and TRX are designed on the second floor. The left part consists of two squash courts with the appropriate facilities and massage areas. There is also a relaxing facilities with a north-facing terrace on the second floor. There are also dressing rooms and hygienic facilities. The designed object is accessible for disabled people. There is a parking lot for 40 cars, 3 motorcycles, one bus and three barracks for cars.

This diploma thesis describes the design and processing of project documentation pension. The proposed facility is located in the village of Železná Ruda- Pamferova Hut. The site is widely used by tourists in winter and summer. This is partly basement building, which has 2 storeys and an attic. The roof is designed as a gabled dormer with a flat roof. The building is based on the footings of plain concrete and under the reinforced concrete pillars are designed shoe. Supporting, peripheral and partition walls are designed from sand-lime bricks SENDWIX. An exception is peripheral walls of the basement, which is in contact with soil, which is designed as a lost formwork. In the dining area, which has an open reinforced concrete columns. Ceiling structure will consist of prestressed ceiling panels SPIROLL. Perimeter walls are insulated using external thermal insulation composite system using insulation from stone wool. The building is functionally divided into three main parts with a common main entrance. The first part is a restaurant with a kitchen, storage and kitchen facilities. This section is designed restaurants with a total capacity of 26 persons, the capacity will be in the summer to expand the possible capacity of the terrace, which belongs to the dining room. It is also proposed sanitary facilities for visitors to the restaurant, kitchen with storage and facilities for staff. The second part is the wellness center, which consists of a gym and rooms with infrared sauna and whirlpool. This section is designed sanitary facilities for visitors separated for men and women. The last part of the pension, which used to accommodate 30 people and the background of the pension. Backgrounds pension means any technical equipment room, storage room for bikes and skis, and not least the individual room house, which also includes a room for personal hygiene. This thesis was created with an emphasis on a correct layout and architectural design, static requirements an

This thesis deals with the design and elaboration process of a project documentation of a sports centre. The designed sports centre building is situated in the southern part of the town of Polička, in the area determined for sports and free time activities complexes and areas. It is a two-floor, non-cellar, flat-roof building. It is based on plain concrete strip foundations and reinforced concrete foundation footing. The bearing, peripheral and partition walls are designed from POROTHERM hollow clay blocks. Reinforced concrete columns are designated in open disposition areas. The ceiling construction is made from SPIROLL pre-stressed concrete floor slabs and point-supported reinforced concrete slabs. The peripheral walls of the first aboveground floor are insulated with external thermal insulation system with a protective gabion facade. The peripheral wall thermal insulation in a bowling restaurant and gym halls extension is designed from a ventilated facade with CEMBRIT METRO facade cladding panels. The building is functionally divided into two main parts with a shared entrance. The sports centre with gyms and other sports facilities form the first part. Three squash courts, a mini-football piste, a special room for spinning and alpinning, a room for group exercising and cloakrooms with sanitary facilities are designed within one part of the sports centre. A restaurant with a bowling area and a kitchen with storerooms and other facilities for employees form the second part. The designed complex is barrier-free. There is aimed to be a car park for fifty cars, four motorbikes and a bus in front of the building. Three parking places are for disabled people.