The Rossendorf Beamline (ROBL) - located at BM20 of the European Synchrotron Radiation Facility (ESRF) in Grenoble, France - is in operation since 1998. This 7th report covers the period from January 2009 to December 2010. In these two years, 67 peer- reviewed papers have been published based on experiments done at the beamline, more than in any biannual period before. Six highlight reports have been selected for this report to demonstrate the scientific strength and diversity of the experiments performed on the two end-stations of the beamline, dedicated to Radiochemistry (RCH) and Materials Research (MRH). The beamtime was more heavily overbooked than ever before, with an acceptance rate of only 25% experiments. We would like to thank our external proposal review members, Prof. Andre Maes (KU Leuven, Belgium), Prof. Laurent Charlet (UJF Grenoble, France), Dr. Andreas Leinweber (MPI Metallforschung, Stuttgart, Germany), Prof. David Rafaja (TU Bergakademie Freiberg, Germany), Prof. Dirk Meyer (TU Dresden, Germany), who evaluated the inhouse proposals in a thorough manner, thereby ensuring that beamtime was distributed according to scientific merit. The period was not only characterized by very successful science, but also by intense work on the optics upgrade. In spring 2009, a workshop was held at ROBL, assembling beamline experts from German, Spanish and Swiss synchrotrons, to evaluate the best setup for the new optics. These suggestions was used to prepare the call for tender published in July 2009. From the tender acceptance in November 2009 on, a series of design review meetings and factory acceptance tests followed. Already in July 2010, the first piece of equipment was delivered, the new double-crystal, double-multilayer monochromator. The disassembly of the old optics components started end of July, 2011, followed by the installation of the new components. As of December 2011, the new optics have seen the first test beam and thorough hot commissioning will be continued until May 2012, since the ESRF shuts down for a major upgrade from December 2011 to April 2012. We expect that we will be ready for user operation from June 2012 on, with a better beamline than ever. The beamline staff would like to thank all partners, research groups and organizations who supported the beamline during the last 24 months. Special thanks to the FZD management, the CRG office of the ESRF with Axel Kaprolat as liaison officer and Eric Dettona as lead technician, and to the ESRF safety group members, Paul Berkvens, Patrick Colomp and Yann Pira.

The second report from the Project-Group ESRF-Beamline of the Forschungszentrum Rossendorf covers the period from July 1999 until December 2000. The ROssendorf BeamLine (ROBL) at the European Synchrotron Radiation Facility (ESRF) in Grenoble, France performed quite well during this time. In the beamtime used by the FZR and collaborating institutes 44 scheduled experiments were performed, while in the ESRF scheduled beamtime 12 experiments. Additionally, a distinct amount of beamtime was devoted to in-house research of the FZR and methodical experiments. Since February 2000 ROBL is part of the European Commission's programme "Access to Research Infrastructure" which supports user groups from member and associated states of the EU during experiments at ROBL. In the year 2000 ROBL hosted 6 groups for experiments. The report is organised in three main parts. The first part contains extended contributions on results obtained at ROBL. The second part gives an overview about the scheduled experiments, publications, guests having visited ROBL with support of the EC, and some other information. Finally, the third part collects the experimental reports of the user groups received.

The second report from the Project-Group ESRF-Beamline of the Forschungszentrum Rossendorf covers the period from July 1999 until December 2000. The ROssendorf BeamLine (ROBL) at the European Synchrotron Radiation Facility (ESRF) in Grenoble, France performed quite well during this time. In the beamtime used by the FZR and collaborating institutes 44 scheduled experiments were performed, while in the ESRF scheduled beamtime 12 experiments. Additionally, a distinct amount of beamtime was devoted to in-house research of the FZR and methodical experiments. Since February 2000 ROBL is part of the European Commission's programme "Access to Research Infrastructure" which supports user groups from member and associated states of the EU during experiments at ROBL. In the year 2000 ROBL hosted 6 groups for experiments. The report is organised in three main parts. The first part contains extended contributions on results obtained at ROBL. The second part gives an overview about the scheduled experiments, publications, guests having visited ROBL with support of the EC, and some other information. Finally, the third part collects the experimental reports of the user groups received.

The Rossendorf Beamline (ROBL) - located at BM20 of the European Synchrotron Radiation Facility (ESRF) in Grenoble, France - is in operation since 1998. This 7th report covers the period from January 2009 to December 2010. In these two years, 67 peer- reviewed papers have been published based on experiments done at the beamline, more than in any biannual period before. Six highlight reports have been selected for this report to demonstrate the scientific strength and diversity of the experiments performed on the two end-stations of the beamline, dedicated to Radiochemistry (RCH) and Materials Research (MRH). The beamtime was more heavily overbooked than ever before, with an acceptance rate of only 25% experiments. We would like to thank our external proposal review members, Prof. Andre Maes (KU Leuven, Belgium), Prof. Laurent Charlet (UJF Grenoble, France), Dr. Andreas Leinweber (MPI Metallforschung, Stuttgart, Germany), Prof. David Rafaja (TU Bergakademie Freiberg, Germany), Prof. Dirk Meyer (TU Dresden, Germany), who evaluated the inhouse proposals in a thorough manner, thereby ensuring that beamtime was distributed according to scientific merit. The period was not only characterized by very successful science, but also by intense work on the optics upgrade. In spring 2009, a workshop was held at ROBL, assembling beamline experts from German, Spanish and Swiss synchrotrons, to evaluate the best setup for the new optics. These suggestions was used to prepare the call for tender published in July 2009. From the tender acceptance in November 2009 on, a series of design review meetings and factory acceptance tests followed. Already in July 2010, the first piece of equipment was delivered, the new double-crystal, double-multilayer monochromator. The disassembly of the old optics components started end of July, 2011, followed by the installation of the new components. As of December 2011, the new optics have seen the first test beam and thorough hot commissioning will be continued until May 2012, since the ESRF shuts down for a major upgrade from December 2011 to April 2012. We expect that we will be ready for user operation from June 2012 on, with a better beamline than ever. The beamline staff would like to thank all partners, research groups and organizations who supported the beamline during the last 24 months. Special thanks to the FZD management, the CRG office of the ESRF with Axel Kaprolat as liaison officer and Eric Dettona as lead technician, and to the ESRF safety group members, Paul Berkvens, Patrick Colomp and Yann Pira.

Bi-annual report on the activities at the ROssendorf BeamLine (ROBL) at the ESRF in Grenoble. The report contains selected contributions on actual research topics, a list of all scheduled experiments, and short experimental reports.

Bi-annual report on the activities at the ROssendorf BeamLine (ROBL) at the ESRF in Grenoble. The report contains selected contributions on actual research topics, a list of all scheduled experiments, and short experimental reports.

Durch das Forschungszentrum Rossendorf wurde in den Jahren 1996-1998 ein eigenes Strahlrohr fuer Experimente mit Synchrotronstrahlung an der ESRF (European Synchrotron Radioation Facility) in Grenoble/Frankreich aufgebaut. Das Strahlrohr verfuegt ueber zwei alternativ nutzbare Messplaetze fuer die Untersuchung von radioaktiven Proben mittels Roentgenabsorptionsspektroskopie und fuer Materialstrukturuntersuchungen mit Roentgendiffraktion. Der Bericht konzentriert sich auf die Arbeiten, die fuer die Steuerung der Optik und die Nutzung der Messplaetze hinsichtlich der Elektronik, Rechentechnik und Software erforderlich waren. Nach einer Beschreibung der Randbedingungen und einer Kurzcharakteristik der geraetetechnischen Basis werden wichtige Hardwarekomponenten fuer die Instrumentierung der Systeme vorgestellt. Die rechentechnische Basis wird anschliessend beschrieben. Die angewendeten Software-Grundprinzipien werden erlaeutert und diskutiert sowie an einigen Applikationen beispielhaft verdeutlicht. Abschliessend werden spezifische Probleme bei der Programmierung von Applikationen mit grafischer Bedienoberflaeche in Verbindung mit Geraetezugriffen behandelt. Tabellen, in denen die benutzten Hardware-Module und die Softwarekomponenten zusammengestellt sind, ermoeglichen einen Ueberblick ueber das Gesamtsystem. Das Literaturverzeichnis dient als Leitfaden fuer die Detaildokumentationen.

Durch das Forschungszentrum Rossendorf wurde in den Jahren 1996-1998 ein eigenes Strahlrohr fuer Experimente mit Synchrotronstrahlung an der ESRF (European Synchrotron Radioation Facility) in Grenoble/Frankreich aufgebaut. Das Strahlrohr verfuegt ueber zwei alternativ nutzbare Messplaetze fuer die Untersuchung von radioaktiven Proben mittels Roentgenabsorptionsspektroskopie und fuer Materialstrukturuntersuchungen mit Roentgendiffraktion. Der Bericht konzentriert sich auf die Arbeiten, die fuer die Steuerung der Optik und die Nutzung der Messplaetze hinsichtlich der Elektronik, Rechentechnik und Software erforderlich waren. Nach einer Beschreibung der Randbedingungen und einer Kurzcharakteristik der geraetetechnischen Basis werden wichtige Hardwarekomponenten fuer die Instrumentierung der Systeme vorgestellt. Die rechentechnische Basis wird anschliessend beschrieben. Die angewendeten Software-Grundprinzipien werden erlaeutert und diskutiert sowie an einigen Applikationen beispielhaft verdeutlicht. Abschliessend werden spezifische Probleme bei der Programmierung von Applikationen mit grafischer Bedienoberflaeche in Verbindung mit Geraetezugriffen behandelt. Tabellen, in denen die benutzten Hardware-Module und die Softwarekomponenten zusammengestellt sind, ermoeglichen einen Ueberblick ueber das Gesamtsystem. Das Literaturverzeichnis dient als Leitfaden fuer die Detaildokumentationen.