Spelling suggestions: "subject:"adiation -- 1ieasurement."" "subject:"adiation -- remeasurement.""
1 |
INVESTIGATION AND EXTENSION OF SELF-CALIBRATION RADIOMETRY.LEE, SUNG-MUK. January 1983 (has links)
Three different types of radiometry have been examined to find the best type for solar spectral irradiance measurements requiring long-term (22 years) and ultra-high precision (0.1% uncertainty) in the near-UV, visible, and near infrared. It has been determined that the best radiometry uses the self-calibration technique developed at NBS using laser lines. Normalization techniques were applied to silicon reflectivity and quantum efficiency models for use with thermal sources and grating spectrometers. The results compared with similar laser-source calibration showed disagreement less than 0.1%. Germanium and GaAsP detectors were also investigated in the infrared and deep blue wavelengths. The germanium detector showed significant recombination loss of photogenerated carriers due to the ion implantation fabrication process. GaAsP detectors have very small dark currents ( < 1 nA), but also demonstrate significant recombination losses inside the photodiode. The possible loss mechanism of the Ge and GaAsP detectors are suggested for future study.
|
2 |
DIGITAL SIGNAL PROCESSING METHODS FOR ESTIMATING SOLAR RADIOMETER ZERO AIRMASS INTERCEPT PARAMETERSScott-Fleming, Ian Crerar, 1955- January 1987 (has links)
No description available.
|
3 |
ABSOLUTE CALIBRATION OF, AND ATMOSPHERIC MEASUREMENTS USING, A MULTIBAND FIELD RADIOMETER (RADIOMETRY).Phillips, Amy Louise. January 1985 (has links)
No description available.
|
4 |
Design, construction, and testing of a microprocessor controlled tracking and scanning solar spectroradiometerBuchhauser, David, 1950- January 1987 (has links)
A versatile solar spectroradiometer has been designed which is capable of measuring direct solar radiation, the solar aureole, and sky radiance far from the sun. An active tracker consisting of a quadrant detector, telescope and stepper-motor driven alt-azimuth mount is used to position the spectroradiometer by computer control for solar tracking and almucantur scans. An internally baffled telescope designed to suppress stray light is employed as the optical receiver, and a photodiode serves to convert the collected flux to an electrical signal. A digitally controlled gain-switching transimpedance amplifier is used to scale the photodiode output to accommodate the large signal range encountered between measuring direct solar radiation and sky radiance well away from the sun. Example measurements are presented which demonstrate the system's capabilities.
|
5 |
A method for predicting peak scanning detection efficiency of a cylindrical sodium iodide scintillation detectorDuffy, William L. 12 September 2001 (has links)
Scanning surveys of building surfaces and land areas are performed with radiation
detection equipment to identify areas of elevated radioactivity. To quantify the
extent and magnitude of the contamination, follow-up radiation surveys and soil
sampling are usually required. The ability to accurately quantify discrete locations
or "hot particles" of contamination requires a full understanding of the scanning
detection efficiency of the instrument being used. A cylindrical sodium iodide
detector's scanning detection efficiency was examined theoretically using the
Monte Carlo N-Particle Code, version 4b, and examined experimentally using the
Marianno Research Sled located in the Department of Nuclear Engineering, Oregon
State University. A method is described for predicting instrument scanning
detection efficiency for a 1 s observation interval over a range of scanning speeds
using a series of static detection efficiency measurements. Testing of the prediction
method and accuracy of predicted values was performed by comparison to
experimentally determined values of scanning detection efficiency. Additionally,
the validity of the predicted scanning detection efficiency values was tested by
quantifying a radioactive source at a number of scanning speeds to quantitatively
determine its activity. Activity values determined by scanning the source were
compared against an activity value determined a by high purity germanium
detection system. Results indicate that the method is both easy to perform and
provides statistically accurate scanning detection efficiency values that can be
utilized for the quantification of discrete locations or "hot particles" of radioactive
contamination. / Graduation date: 2002
|
6 |
Resonance integrals of engineering materialsGreene, Thomas A., 1937- January 1969 (has links)
No description available.
|
7 |
Development of a film radiation dosimeter for small dosesBrown, William Henry, 1940- January 1965 (has links)
No description available.
|
8 |
The chemistry of ferrous-ferric dosimetersBenn, Edward, 1939- January 1965 (has links)
No description available.
|
9 |
Lifetime and intensity measurements for several lines of the oxygen spectrumMasterson, Keith Dennis, 1940- January 1969 (has links)
No description available.
|
10 |
Design and analysis of a spectrally narrow-band radiometerHuttenhow, Jay Donald, 1943- January 1976 (has links)
No description available.
|
Page generated in 0.1126 seconds