No description available.

No description available.

No description available.

Radical polymerisation (RP) has for many years been an industrially important process, and the kinetics of the process remains an active area of research. As polymerisation proceeds, converting monomer (small molecules) into polymer (long chain molecules), chemical species of a variety of chain lengths are produced. Recent work has pointed toward the fact that rate coefficients for polymerisation reactions (specifically, termination and propagation) are often dependent on the chain-length of the reacting species. The focus of this thesis is to study the effects of chain-length-dependent reactions on the kinetics of RP, by using computer-based modeling and comparing the results of such modeling with experimental data. This enables the understanding of otherwise inexplicable trends and the building of more mechanistically detailed and accurate models for RP kinetics. In Chapter 2, a new model for termination is developed, connecting observations and analyses of termination kinetics at short chain lengths (particularly small molecule studies) with other observations and analyses at long chain lengths (conventional RP kinetics studies) in order to construct a model for termination that is shown to be capable of coherently describing termination kinetics at any chain length. In Chapter 3, this new model for termination is tested at short chain lengths on polymerisations with large quantities of added chain transfer agent. With the inclusion of chain-length-dependent propagation in the model, the model for termination is validated. Chapter 4 is aimed at extending an existing reduced-variable, compact, 'universal' description of steady-state RP kinetics by incorporating all known chain-length dependent reactivities. This both increases computational efficiency over other approaches and provides easily evaluated, approximate analytical expressions for RP kinetics. This foundational theory is applied in Chapter 5 to reach a deeper understanding of the behaviour of the model, and show how experimental data may readily be analysed to extract information about chain-length-dependent termination kinetics. In Chapter 6, the effect of chain-length dependent reactivities on the important technique of single-pulse pulsed-laser polymerisation is investigated, and this technique is validated as the best experimental method for investigation of termination kinetics. In general, a central result of this thesis is that chain-length-dependent reactivities, when acknowledged and properly incorporated into models, can explain many phenomena in RP kinetics which otherwise seem difficult to account for. No exceptions to this principle have been found.

Ultrasound irradiation of a protein or polymer solution at the air:water interface can be used to form hollow microspheres containing an air bubble. By introducing a layer of oil and sonicating the oil:water interface, microspheres containing an oil droplet are formed. The microspheres are stabilised by disulfide crosslinking, have diameters of between 1-20 mm and have a number of applications; gas filled protein microspheres are used as ultrasound contrast agents and oil filled microspheres are being developed for delivery of lipophilic drugs. This project extends the scope of sonochemically produced microspheres to include water-in-oil emulsion filled microspheres, which facilitate encapsulation of hydrophilic species, and polymer microspheres that release their contents in response to an external stimulus. Successful encapsulation of a water in oil emulsion phase is demonstrated using confocal microscopy. Release studies are reported for a number of hydrophilic species (in vitro) including 5,6-carboxyfluorescein, 5-fluorouracil and sodium chloride. Release can be triggered by sonochemical disruption of the microsphere shells or cleavage of the disulfide cross links. Thiol-ene coupling reactions initiated by ultrasound irradiation are reported. In water, ultrasound initiation of thiol-ene reactions with electron rich alkenes results in rates of reaction which compare favourably with conventional thermal initiation. Thiol-ene crosslinking is proposed as an alternative to disulfide crosslinking to stabilise sonochemically produced microspheres. Temperature responsive microspheres are produced via the sonochemical method using a block copolymer of N-isopropylacrylamide and thiolated methacrylic acid, P(MASH-b-NIPAm). The block co-polymer is synthesised using reversible addition-fragmentation transfer (RAFT) polymerisation and has a lower critical solution temperature (LCST) of 37 ºC. The microspheres formed from this block copolymer can be seen to rupture, releasing their internal oil phase, when heated above 37 ºC. These findings provide a basis from which to develop sonochemically produced polymer microspheres for responsive delivery of both hydrophilic and lipophilic species.

This work reports the investigation of Cu-mediated polymerization systems and its limits, in order to obtain functional branched polymers, in particular star-shaped and graft-shaped polymers. A novel initiator structure has allowed developing a new approach to synthesise sequence controlled multiblock star polymers via Cu-mediated reversible deactivation radical polymerization (RDRP) in water. This technique allows the preparation of pentablock star shaped polymers in just under 90 minutes of reaction time. The obtained polymers had a good agreement between theoretical and experimental molecular weights and excellent control over molecular weight distribution. Alternatively, the Cu-mediated RDRP of star polymers using a British 1 penny coin was described, displaying similar results as in the literature, providing better experimental conditions. As the copper coin was recovered unharmed, the catalyst was found to be economically very effective. Furthermore, poly(2-ethyl oxazoline) (PEtOx) was polymerized with good control and partially hydrolysed to poly(ethylene imine) (PEI) to yield PEtOx-r-PEI using a microwave reactor. The secondary amines of PEI was converted to macroinitiators, to allow the polymerization of acrylamides in aqueous medium, resulting in graft type polymers based on a poly(oxazoline) backbone with acrylamide side chains. Finally, the synthesis of carbohydrate-monomers was described, which allows to obtain monomers with a different number of carbohydrates (one, two or three). These monomers were polymerised via aqueous SET-LRP, to explore their interaction with carbohydrate binding lectins and to understand the impact on binding of carbohydrate density on polymers and polymer chain length.

Radical polymerisation (RP) has for many years been an industrially important process, and the kinetics of the process remains an active area of research. As polymerisation proceeds, converting monomer (small molecules) into polymer (long chain molecules), chemical species of a variety of chain lengths are produced. Recent work has pointed toward the fact that rate coefficients for polymerisation reactions (specifically, termination and propagation) are often dependent on the chain-length of the reacting species. The focus of this thesis is to study the effects of chain-length-dependent reactions on the kinetics of RP, by using computer-based modeling and comparing the results of such modeling with experimental data. This enables the understanding of otherwise inexplicable trends and the building of more mechanistically detailed and accurate models for RP kinetics. In Chapter 2, a new model for termination is developed, connecting observations and analyses of termination kinetics at short chain lengths (particularly small molecule studies) with other observations and analyses at long chain lengths (conventional RP kinetics studies) in order to construct a model for termination that is shown to be capable of coherently describing termination kinetics at any chain length. In Chapter 3, this new model for termination is tested at short chain lengths on polymerisations with large quantities of added chain transfer agent. With the inclusion of chain-length-dependent propagation in the model, the model for termination is validated. Chapter 4 is aimed at extending an existing reduced-variable, compact, 'universal' description of steady-state RP kinetics by incorporating all known chain-length dependent reactivities. This both increases computational efficiency over other approaches and provides easily evaluated, approximate analytical expressions for RP kinetics. This foundational theory is applied in Chapter 5 to reach a deeper understanding of the behaviour of the model, and show how experimental data may readily be analysed to extract information about chain-length-dependent termination kinetics. In Chapter 6, the effect of chain-length dependent reactivities on the important technique of single-pulse pulsed-laser polymerisation is investigated, and this technique is validated as the best experimental method for investigation of termination kinetics. In general, a central result of this thesis is that chain-length-dependent reactivities, when acknowledged and properly incorporated into models, can explain many phenomena in RP kinetics which otherwise seem difficult to account for. No exceptions to this principle have been found.

The aim of this work was to successfully prepare polymers of N-(2-hydroxypropyl)methacrylamide, (PHPMA) using controlled/"living" free-radical polymerisation technique. For this purpose, atom transfer radical polymerisation (ATRP) and reversible addition-fragmentation (chain) transfer (RAFT) polymerisation were used in preparation of a number of base polymers with the intention of quantitatively converting them into PHPMA. Both methods were applied under varying polymerisation conditions, and the kinetics of the systems investigated. Various rate constants were measured, while computer modelling of the experimental data allowed estimation of other kinetic parameters of interest. Investigations into solvent and ligand effects on the kinetics of ATRP of the activated ester methacryloyloxy succinimide (MAOS) and one of the archetypal methacrylate monomers, methyl methacrylate (MMA) were carried out. The method of RAFT was also employed in polymerisation of MAOS and a number of other monomers in the hope of finding the best synthetic precursor of PHPMA. Polymers of methacryloyl chloride (MAC) and p-nitrophenyl methacrylate (NPMA) were prepared, as well as the polymers of HPMA itself and N-isopropyl methacrylamide. Polymerisation of MMA by RAFT was also attempted in view of adding to current knowledge on the monomer's behaviour and the kinetic characteristics of its RAFT polymerisation. Preparation of PHPMA from PMAOS, PMAC and PNPMA was attempted. Successful preparation of PHPMA from the polymer of the acid chloride was achieved under mild reaction conditions, while displacement of N-hydroxysuccinimide groups of PMAOS resulted in unexpected modification of the polymer under the conditions used. Conversion of PNPMA into PHPMA was not achieved. At this stage these results suggest inadequacy of both PMAOS and PNPMA as reactive polymeric precursors.

The aim of this work was to successfully prepare polymers of N-(2-hydroxypropyl)methacrylamide, (PHPMA) using controlled/"living" free-radical polymerisation technique. For this purpose, atom transfer radical polymerisation (ATRP) and reversible addition-fragmentation (chain) transfer (RAFT) polymerisation were used in preparation of a number of base polymers with the intention of quantitatively converting them into PHPMA. Both methods were applied under varying polymerisation conditions, and the kinetics of the systems investigated. Various rate constants were measured, while computer modelling of the experimental data allowed estimation of other kinetic parameters of interest. Investigations into solvent and ligand effects on the kinetics of ATRP of the activated ester methacryloyloxy succinimide (MAOS) and one of the archetypal methacrylate monomers, methyl methacrylate (MMA) were carried out. The method of RAFT was also employed in polymerisation of MAOS and a number of other monomers in the hope of finding the best synthetic precursor of PHPMA. Polymers of methacryloyl chloride (MAC) and p-nitrophenyl methacrylate (NPMA) were prepared, as well as the polymers of HPMA itself and N-isopropyl methacrylamide. Polymerisation of MMA by RAFT was also attempted in view of adding to current knowledge on the monomer's behaviour and the kinetic characteristics of its RAFT polymerisation. Preparation of PHPMA from PMAOS, PMAC and PNPMA was attempted. Successful preparation of PHPMA from the polymer of the acid chloride was achieved under mild reaction conditions, while displacement of N-hydroxysuccinimide groups of PMAOS resulted in unexpected modification of the polymer under the conditions used. Conversion of PNPMA into PHPMA was not achieved. At this stage these results suggest inadequacy of both PMAOS and PNPMA as reactive polymeric precursors.

Gene delivery can potentially treat acquired and genetic diseases such as cystic fibrosis, haemophilia and cancer. Non-viral gene delivery vectors are attractive candidates over viral vectors such as recombinant viruses, due to their lower cytotoxicity and immunogenicity, despite significantly lower transfection efficiencies. To improve efficiency of non-viral vectors, the investigation of the various parameters influencing DNA transfection is essential. The present study developed a versatile gene delivery system with tailored physicochemical and biological properties. The system used polymer brushes synthesised via atomic transfer radical polymerisation (ATRP), grafted from silica nanoparticles, whose charge density, grafting density, chemistry, length of brush, the size and shape can be altered. The primary focus of the study was poly(2-dimethylaminoethyl methacrylate) (PDMAEMA), known for its positive charge and DNA condensation. The ability of PDMAEMA to interact with DNA was characterised using dynamic light scattering, electrophoretic light scattering methods, surface plasmon resonance and in situ ellipsometry whilst its interaction with cells was studied via cell viability assays. The brush behaviour in response to pH and ionic strength was also studied. The charge density was altered by copolymerising with poly[oligo(ethylene glycol) methyl ether methacrylate](POEGMA) and the effect of such modification on DNA interaction was studied. PDMAEMA-grafted nanoparticles gave the highest transfection efficiency compared to other synthesised polymer brushes, but still displaying almost 2-fold lower transfection efficiency than the commercially available reagent jetPEI®. Different brush chemistries were also investigated. Poly(glycidyl methacrylate) (PGMA) decorated with oligoamines: allylamine, diethylenetriamine and pentaethylene hexamine, and PDMAEMA quaternized with alkyl halides: methyl iodide, allyl iodide and ethyl iodoacetate did not show any significant transfection, despite their performance reported in the literature. The robust system developed is a promising platform for further investigation of parameters influencing cellular uptake and gene expression, and important milestone to develop non-viral gene delivery systems.