The dissertation consists of four essays that treat different aspects or the evaluation of public policy. Two essays are applications of the travel cost method. In the first of these, recreational travel to the Swedish coast is studied to obtain estimates of the social benefits from reduced eutrophication of the sea. The second travel cost essay attempts at estimating how the probability that a woman will undergo mammographic screening for breast cancer is affected by the distance she has to travel to undergo such an examination. Using these estimated probabilities, the woman's valuation of the examination is obtained. The two other essays deal with automobile taxation. One essay analyzes how taxation and the Swedish eco-labeling system of automobiles have affected the sale of different car models. The last essay treats the effects of taxes and of scrappage premiums on the life length of cars. / Diss. Stockholm : Handelshögskolan, 1999

No description available.

Em ecologia, o comportamento dos animais é freqüentemente estudado para entender melhor suas preferências por diferentes tipos de alimento e habitat. O presente trabalho esta relacionado a este tópico, dividindo-se em três capítulos. O primeiro capitulo refere-se à estimação da função da probabilidade da seleção de recurso (RSPF) comparado com um modelo de escolha discreta (DCM) com uma escolha, usando as estatísticas qui-quadrado para obter as estimativas. As melhores estimativas foram obtidas pelo método DCM com uma escolha. No entanto, os animais não fazem a sua seleção baseados apenas em uma escolha. Com RSPF, as estimativas de máxima verossimilhança, usadas pela regressão logística ainda não atingiram os objetivos, já que os animais têm mais de uma escolha. R e o software Minitab e a linguagem de programação Fortran foram usados para obter os resultados deste capítulo. No segundo capítulo discutimos mais a verossimilhança do primeiro capítulo. Uma nova verossimilhança para a RSPF é apresentada, a qual considera as unidades usadas e não usadas, e métodos de bootstrapping paramétrico e não paramétrico são usados para estudar o viés e a variância dos estimadores dos parâmetros, usando o programa FORTRAN para obter os resultados. No terceiro capítulo, a nova verossimilhança apresentada no capítulo 2 é usada com um modelo de escolha discreta, para resolver parte do problema apresentado no primeiro capítulo. A estrutura de encaixe é proposta para modelar a seleção de habitat de 28 corujas manchadas (Strix occidentalis), assim como a uma generalização do modelo logit encaixado, usando a maximização da utilidade aleatória e a RSPF aleatória. Métodos de otimização numérica, e o sistema computacional SAS, são usados para estimar os parâmetros de estrutura de encaixe. / In ecology, the behavior of animals is often studied to better understand their preferences for different types of habitat and food. The present work is concerned with this topic. It is divided into three chapters. The first concerns the estimation of a resource selection probability function (RSPF) compared with a discrete choice model (DCM) using chi-squared to obtain estimates. The best estimates were obtained by the DCM method. Nevertheless, animals were not selected based on choice alone. With RSPF, the maximum likelihood estimates used with the logistic regression still did not reach the objectives, since the animals have more than one choice. R and Minitab software and the FORTRAN programming language were used for the computations in this chapter. The second chapter discusses further the likelihood presented in the first chapter. A new likelihood for a RSPF is presented, which takes into account the units used and not used, and parametric and non-parametric bootstrapping are employed to study the bias and variance of parameter estimators, using a FORTRAN program for the calculations. In the third chapter, the new likelihood presented in chapter 2, with a discrete choice model is used to resolve a part of the problem presented in the first chapter. A nested structure is proposed for modelling selection by 28 spotted owls (Strix occidentalis) as well as a generalized nested logit model using random utility maximization and a random RSPF. Numerical optimization methods and the SAS system were employed to estimate the nested structural parameters.

Em ecologia, o comportamento dos animais é freqüentemente estudado para entender melhor suas preferências por diferentes tipos de alimento e habitat. O presente trabalho esta relacionado a este tópico, dividindo-se em três capítulos. O primeiro capitulo refere-se à estimação da função da probabilidade da seleção de recurso (RSPF) comparado com um modelo de escolha discreta (DCM) com uma escolha, usando as estatísticas qui-quadrado para obter as estimativas. As melhores estimativas foram obtidas pelo método DCM com uma escolha. No entanto, os animais não fazem a sua seleção baseados apenas em uma escolha. Com RSPF, as estimativas de máxima verossimilhança, usadas pela regressão logística ainda não atingiram os objetivos, já que os animais têm mais de uma escolha. R e o software Minitab e a linguagem de programação Fortran foram usados para obter os resultados deste capítulo. No segundo capítulo discutimos mais a verossimilhança do primeiro capítulo. Uma nova verossimilhança para a RSPF é apresentada, a qual considera as unidades usadas e não usadas, e métodos de bootstrapping paramétrico e não paramétrico são usados para estudar o viés e a variância dos estimadores dos parâmetros, usando o programa FORTRAN para obter os resultados. No terceiro capítulo, a nova verossimilhança apresentada no capítulo 2 é usada com um modelo de escolha discreta, para resolver parte do problema apresentado no primeiro capítulo. A estrutura de encaixe é proposta para modelar a seleção de habitat de 28 corujas manchadas (Strix occidentalis), assim como a uma generalização do modelo logit encaixado, usando a maximização da utilidade aleatória e a RSPF aleatória. Métodos de otimização numérica, e o sistema computacional SAS, são usados para estimar os parâmetros de estrutura de encaixe. / In ecology, the behavior of animals is often studied to better understand their preferences for different types of habitat and food. The present work is concerned with this topic. It is divided into three chapters. The first concerns the estimation of a resource selection probability function (RSPF) compared with a discrete choice model (DCM) using chi-squared to obtain estimates. The best estimates were obtained by the DCM method. Nevertheless, animals were not selected based on choice alone. With RSPF, the maximum likelihood estimates used with the logistic regression still did not reach the objectives, since the animals have more than one choice. R and Minitab software and the FORTRAN programming language were used for the computations in this chapter. The second chapter discusses further the likelihood presented in the first chapter. A new likelihood for a RSPF is presented, which takes into account the units used and not used, and parametric and non-parametric bootstrapping are employed to study the bias and variance of parameter estimators, using a FORTRAN program for the calculations. In the third chapter, the new likelihood presented in chapter 2, with a discrete choice model is used to resolve a part of the problem presented in the first chapter. A nested structure is proposed for modelling selection by 28 spotted owls (Strix occidentalis) as well as a generalized nested logit model using random utility maximization and a random RSPF. Numerical optimization methods and the SAS system were employed to estimate the nested structural parameters.

Cette thèse porte sur la modélisation du trafic dans les réseaux routiers et comment celle-ci est intégrée dans des modèles d'optimisation. Ces deux sujets ont évolué de manière plutôt disjointe: le trafic est prédit par des modèles mathématiques de plus en plus complexes, mais ce progrès n'a pas été incorporé dans les modèles de design de réseau dans lesquels les usagers de la route jouent un rôle crucial. Le but de cet ouvrage est d'intégrer des modèles d'utilités aléatoires calibrés avec de vraies données dans certains modèles biniveaux d'optimisation et ce, par une décomposition de Benders efficace. Cette décomposition particulière s'avère être généralisable par rapport à une grande classe de problèmes communs dans la litérature et permet d'en résoudre des exemples de grande taille. Le premier article présente une méthodologie générale pour utiliser des données GPS d'une flotte de véhicules afin d'estimer les paramètres d'un modèle de demande dit recursive logit. Les traces GPS sont d'abord associées aux liens d'un réseau à l'aide d'un algorithme tenant compte de plusieurs facteurs. Les chemins formés par ces suites de liens et leurs caractéristiques sont utilisés afin d'estimer les paramètres d'un modèle de choix. Ces paramètres représentent la perception qu'ont les usagers de chacune de ces caractéristiques par rapport au choix de leur chemin. Les données utilisées dans cet article proviennent des véhicules appartenant à plusieurs compagnies de transport opérant principalement dans la région de Montréal. Le deuxième article aborde l'intégration d'un modèle de choix de chemin avec utilités aléatoires dans une nouvelle formulation biniveau pour le problème de capture de flot de trafic. Le modèle proposé permet de représenter différents comportements des usagers par rapport à leur choix de chemin en définissant les utilités d'arcs appropriées. Ces utilités sont stochastiques ce qui contribue d'autant plus à capturer un comportement réaliste des usagers. Le modèle biniveau est rendu linéaire à travers l'ajout d'un terme lagrangien basé sur la dualité forte et ceci mène à une décomposition de Benders particulièrement efficace. Les expériences numériques sont principalement menés sur un réseau représentant la ville de Winnipeg ce qui démontre la possibilité de résoudre des problèmes de taille relativement grande. Le troisième article démontre que l'approche du second article peut s'appliquer à une forme particulière de modèles biniveaux qui comprennent plusieurs problèmes différents. La décomposition est d'abord présentée dans un cadre général, puis dans un contexte où le second niveau du modèle biniveau est un problème de plus courts chemins. Afin d'établir que ce contexte inclut plusieurs applications, deux applications distinctes sont adaptées à la forme requise: le transport de matières dangeureuses et la capture de flot de trafic déterministe. Une troisième application, la conception et l'établissement de prix de réseau simultanés, est aussi présentée de manière similaire à l'Annexe B de cette thèse. / The subject of this thesis is the modeling of traffic in road networks and its integration in optimization models. In the literature, these two topics have to a large extent evolved independently: traffic is predicted more accurately by increasingly complex mathematical models, but this progress has not been incorporated in network design models where road users play a crucial role. The goal of this work is to integrate random utility models calibrated with real data into bilevel optimization models through an efficient Benders decomposition. This particular decomposition generalizes to a wide class of problems commonly found in the literature and can be used to solved large-scale instances. The first article presents a general methodology to use GPS data gathered from a fleet of vehicles to estimate the parameters of a recursive logit demand model. The GPS traces are first matched to the arcs of a network through an algorithm taking into account various factors. The paths resulting from these sequences of arcs, along with their characteristics, are used to estimate parameters of a choice model. The parameters represent users' perception of each of these characteristics in regards to their path choice behaviour. The data used in this article comes from trucks used by a number of transportation companies operating mainly in the Montreal region. The second article addresses the integration of a random utility maximization model in a new bilevel formulation for the general flow capture problem. The proposed model allows for a representation of different user behaviors in regards to their path choice by defining appropriate arc utilities. These arc utilities are stochastic which further contributes in capturing real user behavior. This bilevel model is linearized through the inclusion of a Lagrangian term based on strong duality which paves the way for a particularly efficient Benders decomposition. The numerical experiments are mostly conducted on a network representing the city of Winnipeg which demonstrates the ability to solve problems of a relatively large size. The third article illustrates how the approach used in the second article can be generalized to a particular form of bilevel models which encompasses many different problems. The decomposition is first presented in a general setting and subsequently in a context where the lower level of the bilevel model is a shortest path problem. In order to demonstrate that this form is general, two distinct applications are adapted to fit the required form: hazmat transportation network design and general flow capture. A third application, joint network design and pricing, is also similarly explored in Appendix B of this thesis.