Spelling suggestions: "subject:"are earth metals"" "subject:"care earth metals""
111 |
Sensitization of Lanthanides and Organic-Based Phosphorescence via Energy Transfer and Heavy-Atom EffectsArvapally, Ravi K. 05 1900 (has links)
The major topics discussed are the phosphorescence sensitization in the lanthanides via energy transfer and in the organics by heavy atom effects. The f-f transitions in lanthanides are parity forbidden and have weak molar extinction coefficients. Upon complexation with the ligand, ttrpy (4'-p-Tolyl-[2,2':6',2"]-terpyridine) the absorption takes place through the ligand and the excitation is transferred to the lanthanides, which in turn emit. This process is known as "sensitized luminescence." Bright red emission from europium and bright green emission from terbium complexes were observed. There is ongoing work on the making of OLEDs with neutral complexes of lanthanide hexafluoroacetyl acetonate/ttrpy, studied in this dissertation. Attempts to observe analogous energy transfer from the inorganic donor complexes of Au(I) thiocyanates were unsuccessful due to poor overlap of the emissions of these systems with the absorptions of Eu(III) and Tb(III). Photophysics of silver-aromatic complexes deals with the enhancement of phosphorescence in the aromatics. The heavy atom effect of the silver is responsible for this enhancement in phosphorescence. Aromatics such as naphthalene, perylene, anthracene and pyrene were involved in this study. Stern Volmer plots were studied by performing the quenching studies. The quenchers employed were both heavy metals such as silver and thallium and lighter metal like potassium. Dynamic quenching as the predominant phenomenon was noticed.
|
112 |
Spatially Explicit Assessment of Environmental Impacts in the Electronics SectorKali Diane Frost (11813585) 09 December 2021 (has links)
<div>As society rapidly migrates to digitized services, the Information, Communications, and Technology (ICT) sector is projected to sustain a 16% compound annual growth rate (CAGR) over the next five years, surpassing $1 trillion in revenue by 2024. The hardware infrastructure that supports ICT growth, such as semiconductor chips and hard disk drives (HDDs), is also experiencing parallel growth trajectories. Thus, large technology companies need to understand the environmental implications of growth in these vital components within their supply chains, as they strive to reach ambitious targets for carbon, water, and waste reduction.</div><div><br></div><div>Life cycle assessment (LCA) is a powerful tool for measuring environmental impacts along the life cycle of a product and is implemented here to measure emissions and resource use in the semiconductor and HDD manufacturing supply chains, and to quantify the benefits of circularity for HDD components. However, to understand how environmental impacts of a manufacturing process relate to the landscapes (i.e. ecosystems) where manufacturing occurs, one must look to methods beyond LCA. </div><div><br></div><div>Footprinting methods are a promising tool for bridging the gap between LCA process data inventories and site-specific impacts on ecosystems. Further, the footprint assesses the total volume of emission over a time period, which is aligned with the concept of absolute sustainability. As such, regionalized footprint methods for freshwater use in the semiconductor industry and toxic chemical pollution for the HDD rare earth magnet supply chain were undertaken. In each case, data from the LCA literature or custom LCAs were used as the basis for the life cycle inventory, but advanced methods including regional databases of water scarcity and toxicity factors were used to quantify and communicate impacts. Further, geographic information systems (GIS) were used to allocate emissions or water use from a manufacturing facility with their associated watershed, which enabled aggregation of data across various geographies (i.e. watershed, region, country). </div><div><br></div><div>This work implements multi-disciplinary methods, databases, and tools with the aim to bring water and chemical footprinting methods a step closer towards meaningful assessment of a product’s impact on local, regional, and planetary boundaries. </div><div><br></div>
|
113 |
Toward lanthanide containing coordination polymers and nanomaterialsUnknown Date (has links)
The focus of this thesis is to develop lanthanide (Ln) luminescent materials through the exploration of coordination polymers and nanomaterials. Herein, dimethyl-3,4- furanedicarboxylate acid undergoes hydrolysis under hydrothermal conditions to form coordination polymers with lanthanide ions. The resulting coordination polymers exhibited luminescent properties, with quantum yields and lifetimes for the Eu-and Tb-CP of 1.14+-0.32% and 0.387=-0.0001 mx, and 3.33=-0.82% and 0.769=-0.006 ms, respectively. While the incorporation of lanthanides was not achieved in this work, progress toward the production of pure phase InP in the nanoregime has been made, using a low-cost, hydrothermal method. Through SEM and PXRD conflict, it is believed that pure INP particles with a size range of 58-81 nm were successfully synthesized. / by Natalie E. Greig. / Thesis (M.S.)--Florida Atlantic University, 2012. / Includes bibliography. / Mode of access: World Wide Web. / System requirements: Adobe Reader.
|
114 |
Lanthanide-based nanomaterials for imaging and inhibition of EBV-related cancersZha, Shuai 12 June 2020 (has links)
Nasopharyngeal Carcinoma (NPC) as a typical malignancy that occurs in high-incidence areas, e.g. southern China region, including Hong Kong, and it has aroused wide interests for local researchers to study. The Epstein-Barr virus (EBV) was reported as a vital herpes virus for the growth of NPC. Two significant proteins in EBV, namely Epstein-Barr Nuclear Antigen 1 (EBNA1) and latent infection membrane protein 1 (LMP1) are crucial for virus maintenance and EBV-infected cell development, and essential for cell proliferation and differentiation of EBV latent life cycle, respectively. Thus, inhibition of EBNA1 and LMP1 can be regarded as effective and potent therapy on EBV-associated cancers. In this thesis, the conjugation of core-shell structured upconversion nanoparticles (UCNPs) with distinct EBV-specific peptides including EBNA1 and LMP1 targeting peptides to achieve both impressive inhibition on EBV-positive cancers in vitro/in vivo and visualization on EBV-positive cells with responsive upconversion emission signals were investigated. Taking advantage of lanthanide-based UCNPs, their unique photophysical properties offer deep tissue penetration depth, negligible photobleaching and photocytotoxicity, and therefore provides a solid foundation for convincible theranostic studies. Furthermore, desired inhibitory performance was achieved, it was shown that ~50 mg/mL of nanoprobes can inhibit half of EBV-infected cell viability and only 0.25 mg/tumor of nanoprobes dosage via intravenous injection can prohibit 64.7% of growth inhibition of an EBV-positive tumor
|
115 |
Rare Earth Metals' Resiliency and Volatility Spillover Effects : A Critical Supply Assessment for Western Technologies From a Risk Management PerspectiveEbrahimi, Farzam, Elm, Samuel January 2023 (has links)
This paper explores the relationship between Chinese rare earth metals (REMs) and the industries in the U.S and Europe that heavily rely on them. The study uses the EGARCH(1,1)-ARMA(1,0) process for conditional volatility and incorporates it into VAR(8) framework for forecast error variance decomposition to evaluate the static and dynamic volatility spillovers using daily data from the 2nd of January 2018 to the 3rd of March 2023. The liaison of risk management is also consolidated through the incorporation of Value at Risk and Event Study. Our findings indicate that the volatility interconnectedness between the Chinese REMs market and computer and electronics, electric vehicle, and wind energy industries exhibits relatively low volatility spillover to and from each other. Value at Risk measures suggests complexity in assessing the potential short-term losses for REM equity, leading to difficulties in risk management. Establishing and utilizing a derivatives market could be beneficial for future notice. However, the study also highlights that severe geopolitical risk or conflict could enable extreme levels of financial risk due to the global supply dominance of the Chinese quasi-monopolistic construct and the elements' overall criticality in the sustainable energy transition. The study also highlights the infeasibility of Western nations decoupling themselves from the Chinese REM supply. Various factors such as the pace of advancement in sourcing alternatives, technological advancements, and recycling technology are the main drivers of ineligibility. The forecasted global demand for REMs is also expected to increase significantly, primarily driven by the renewable and sustainable energy transition worldwide, further straining the possibility of independence. Therefore, the pace of advancement of these factors must collectively supersede that of the forecasted demand to mitigate the risk. Keywords: Rare Earth Metals, Interconnectedness, Conditional Volatility, Risk Management, Value at Risk, Event Study.
|
116 |
Density Functional Theory Study Of Molecules And Crystals Containing D And F MetalsGangopadhyay, Shruba 01 January 2011 (has links)
Density Functional Theory (DFT) method is applied to study the crystal structure of transition metal and lanthanide oxides, as well as molecular magnetic complexes. DFT is a widely popular computational approach because it recasts a many-body problem of interacting electrons into an equivalent problem of non-interacting electrons, greatly reducing computational cost. We show that for certain structural properties like phase stability, lattice parameter and oxygen migration energetics pure DFT can give good agreement with experiments. But moving to more sensitive properties like spin state energetic certain modifications of standard DFT are needed. First we investigated mixed ionic-electronic conducting perovskite type oxides with a general formula ABO3 (where A =Ba, Sr, Ca and B = Co, Fe, Mn). These oxides often have high mobility of the oxygen vacancies and exhibit strong ionic conductivity. They are key materials that find use in several energy related applications, including solid oxide fuel cell (SOFC), sensors, oxygen separation membranes, and catalysts. Different cations and oxygen vacancies ordering are examined using plane wave pseudopotential density functional theory. We find that cations are completely disordered, whereas oxygen vacancies exhibit a strong trend for aggregation in L-shaped trimer and square tetramer structure. On the basis of our results, we suggest a new explanation for BSCF phase stability. Instead of linear vacancy ordering, which must take place before the phase transition into brownmillerite structure, the oxygen vacancies in BSCF prefer to form the finite clusters and preserve the disordered cubic structure. This structural feature could be found only in the first-principles simulations and cannot be explained by the effect of the ionic radii alone. In order to understand vacancy clustering and phase iv stability in oxygen-deficient barium strontium cobalt iron oxide (BSCF), we predict stability and activation energies for oxygen vacancy migration. Using symmetry constrained search and Nudged Elastic Band method, we characterize the transition states for an oxygen anion moving into a nearby oxygen vacancy site that is surrounded by different cations and find the activation energies to vary in the range 30-50 kJ/mol in good agreement with experimental data. Next we study spin alignments of single molecule magnets (SMM). SMMs are a class of polynuclear transition metal complexes, which characterized by a large spin ground state and considerable negative anisotropy. These properties lead to a barrier for the reversal of magnetization. For these reasons SMM are expected to be promising materials for molecular spintronics and quantum computing applications. To design SMM for quantum computation, we need to accurately predict their magnetic properties. The most important property is, Heisenberg exchange coupling constant (J). This constant appears in model Heisenberg Hamiltonian that can be written in general form as here Jij represents the coupling between the two magnetic centers i and j with the spin states Si and Sj. The positive J values indicate the ferromagnetic ground state and the negative ones indicate the antiferromagnetic ground state. We found pure DFT is not accurate enough to predict J values. We employ density functionals with a Hubbard U term that helps to counteract the unphysical delocalization of electrons due to errors in pure exchange-correlation functionals. Unlike most previous DFT+U studies, we calibrate U parameters for both metal and ligand atoms using five binuclear manganese complexes as the benchmarks. We note delocalization of the spin density onto acetate ligands due to π-back bonding, inverting spin-polarization of the Jiij −= ∑ S.S.JH v acetate oxygen atoms relative to that predicted from superexchange mechanism. This inversion may affect performance of the models assuming strict localization of the spins on magnetic centers for the complexes with bridging acetate ligands. Next, we apply DFT+U methodology for Mn12(mda) and Mn12(ada) complexes to calculate all six nearest neighbor Jij value. Our result shows both qualitative and quantitative agreement with experiments unlike other DFT studies. Using the optimized geometry of the ground spin state instead of less accurate experimental geometry was found to be crucial for this good agreement. The protocol tested in this study can be applied for the rational design of single-molecule magnets for molecular spintronics and quantum computing applications. Finally we apply hybrid DFT methodology to calculate geometrical parameters for cerium oxides. We review the experimental and computational studies on the cerium oxide nanoparticles, as well as stoichiometric phases of bulk ceria. Electroneutral and nonpolar pentalayers are identified as building blocks of type A sesqioxide structure. The idealized structure of the nanoparticles is described as dioxide covered by a single pentalayer of sesquioxide, which explains the exceptional stability of subsurface vacancies in nanoceria. The density functional theory (DFT) predictions of the lattice parameters and bulk moduli for the Ce(IV) and Ce(III) oxides at the hybrid DFT level are also presented. The calculated values for both compounds agree with experiment and allow to predict changes in the lattice parameter with decreasing size of the nanoparticles. The results validate hybrid DFT as a promising method for future study the structure of oxygen vacancies and catalytic properties of ceria nanoparticles.
|
117 |
On the removal of Phosphonates and trace elementsTorres Serrano, Victor Manuel 11 1900 (has links)
Resource recovery has become essential to compensate for costly and complex technical requirements to implement zero-liquid discharge (ZLD) policies. Antiscalant removal, especially phosphonate-based antiscalants, is a clear example of resource and potential subsequent valorization. The global market for phosphonate-based antiscalants is expected to grow in the coming years along with increasing membrane desalination projects. It implies the disposal in surface waters of tons of phosphonates and trace elements, present in wastewater and concentrates, every day. Removing the phosphonates and trace elements allows their subsequent recovery and valorization, minimizing squeezing produc-tion/extraction procedures and saving the environment from suffering any im-pact because of them.
The first part of this thesis focuses on phosphonate removal with iron and aluminum-based adsorbents. Porous iron and aluminum (oxi)hydroxides can remove phosphonates from concentrates completely. The main limitation of this process is the diffusion of the phosphonates through adsorbent particles. As proved in this thesis, temperature significantly improves the adsorption kinetics of the phosphonates on both adsorbents as a result of the variation of the diffusion coefficient. The presence of calcium also plays an important role, since accelerates the adsorption at the first stages of the process, but limits and saturates the capacity of the adsorbent surface for further adsorption. More research on the role of calcium is needed in this regard to better understand how the adsorption/diffusion of the phosphonates is affected by this common element present in concentrates.
Electrocoagulation was studied in the second part of this thesis as a potential approach for phosphonate removal. Using pure iron electrodes, the applied current density can be easily optimized. As a result, dissolved phosphonates are quickly removed from a large concentrate volume at a relatively low cost and minimal sludge production. The benefits of this technique lie in the possibility of producing the substrate (adsorbent) in situ for the phosphonate to be adsorbed. Furthermore, the time required to completely remove the phosphonates is remarkably shorter compared to adsorption, which, as pointed out above, is limited by diffusion phenomena. Alkaline washing was relatively successful at recovering the phosphorus from the sludge, depending on the dissolved phosphonate in the concentrate. Although experimental results may look promising, further research on finding the optimum working conditions has to be addressed. The process is open to improvement in terms of new electrode materials, reactor design, phosphorus recovery, or optimal working temperature.
In the third part of the thesis, the adsorption potential of previously tested adsorbents for the removal of elements at trace levels. The iron-based adsorbent, commercialized for phosphate and arsenic removal, turned out to be excellent at removing transition metals (TM) and rare earth elements (REE). The study was carried out in parallel with the exploration of the capabilities of a high-resolution inductively coupled plasma mass spectrometry (HR ICP-MS) instrument. The potential of this analytical procedure allows the detection and quantification of all the isotopes at the ultra-trace level (in the range of a few ng·L-1) and in only one measurement round. Furthermore, interferences from polyatomic species, formed during the ionization in the plasma, are easily resolved due to the high-resolution mode. As a result, the detection of the targeted element is easily discriminated from the potential interferences. This feature makes a remarkable difference regarding ordinary ICP-MS, which requires different analytical procedures to properly resolve overlapping signals. This analytical procedure opens new possibilities to test the adsorbents in new conditions and develop analytical methods for water speciation.
|
118 |
The Synthesis and Structural Characterization of Main Group and Lanthanide Metal Compounds Supported by the Multidentate [N₃C] Donor Ligand tris[(1-isopropylbenzimidazol-2-yl)dimethylsilyl]methyl, [TismPriBenz]MVaccaro, David Alexander January 2023 (has links)
The Parkin group has recently synthesized tris[(1-isopropylbenzimidazol-2-yl)dimethylsilyl]methane, [TismPriBenz]H, a bulky tetradentate tripodal ligand, which upon deprotonation can coordinated to form a variety of carbatrane metal complexes.The [TismPriBenz] ligand has been previously shown to stabilize metal hydride complexes, for example [TismPriBenz]MgH and [TismPriBenz]ZnH, and the ligand also has been incorporated in complexes featuring all of the non-radioactive Group 12 and Group 13 metals, as well as a large range of transition metals. However, the reactivity of these complexes towards carbonyl compounds is largely unexplored. Additionally, beyond [TismPriBenz]Li, there has been no attempt to introduce the heavier alkali metals into the [TismPriBenz] framework, which could potentially provide more reactive starting materials to generate other previously inaccessible metal complexes of the ligand; for instance, prior to this report, there has been no example of a lanthanide complex of [TismPriBenz].
In Chapter 1, the reactivity of [TismPriBenz]MgH and [TismPriBenz]MgMe towards ketones, aldehydes, and esters is explored. Generally, these magnesium complexes are able to insert a C=O double bond into a Mg–Me or Mg–H bond respectively, providing access to a large class of magnesium alkoxides. Specifically, [TismPriBenz]MgR (R = H, Me) can insert benzaldehyde and benzophenone to give [TismPriBenz]MgOCRHPh or[TismPriBenz]MgOCRPh₂ respectively. Additionally, [TismPriBenz]MgMe has shown rare reactivity towards methyl ketones, in that it forms the magnesium enolate compounds [TismPriBenz]MgC(Me)=CH₂ and [TismPriBenz]MgC(Ph)=CH2 upon treatment with acetone or acetophenone. In fact, [TismPriBenz]MgC(Me)=CH₂ is only the fourth acetone enolate complex to be structurally characterized, and the first such magnesium example.
In the presence of the ester compounds methyl formate and ethyl acetate, [TismPriBenz]MgH and [TismPriBenz]MgMe are able to follow the insertion of the carbonyl with immediate elimination of either an aldehyde or ketone to yield the simple alkoxides [TismPriBenz]MgOMe and [TismPriBenz]MgOEt, a reaction with little precedence in the literature. [TismPriBenz]MgMe is also able to prompt the Claisen condensation of ethyl acetate, forming the first [TismPriBenz] complex with a 6-member chelating ring, [TismPriBenz]Mg(κ²-OC(Me)HC(O)OEt). These various alkoxides have demonstrated the ability to catalyze the Tishchenko reaction, the dimerization of an aldehyde to make an ester, and have also shown promise as catalysts for hydroboration and retro-aldol reactions. Lastly, the [TismPriBenz]Mg compounds have shown interesting reactivity towards O₂, leading to the isolation of both the rare peroxide dimer {[TismPriBenz]Mg}₂(μ-O₂) and the alkyl peroxide [TismPriBenz]MgOOMe.
In Chapter 2, the reactivity of the complex [TismPriBenz]Tl is further developed, providing access to previously known methyl and iodide compounds of magnesium, zinc, and cadmium. Additionally, [TismPriBenz]Tl has been shown to react directly with the alkali metals sodium, potassium, and rubidium to form the novel alkali metal complexes [TismPriBenz]M (M = Na, K, Rb). Furthermore, [TismPriBenz]Li can react with CsF to afford [TismPriBenz]Cs, completing the non-radioactive Group 1 [TismPriBenz]M series. This makes [TismPriBenz] one of only a handful of organic ligands to have structurally characterized compounds with all of the alkali metals from Li to Cs, and the only ligand that formsmonomeric complexes in each case. [TismPriBenz]K was also used as a starting material to synthesize the first [TismPriBenz] lanthanide complexes, [TismPriBenz]YbI and [TismPriBenz]YbCl₂. [TismPriBenz]YbI itself can further react with KN(SiMe₃)₂ and NaCp to give [TismPriBenz]YbN(SiMe₃)₂ and [TismPriBenz]YbCp respectively.
Lastly, the ability of the [TismPriBenz]Zn halide series to form ion pair complexes was investigated. [TismPriBenz]ZnI can react with ZnI₂ to afford {[TismPriBenz]Zn}₂[Zn₃I₈], which contains the novel zinc halide species [Zn₃I₈]²⁻. Additionally, all of the [TismPriBenz]ZnX (X = Cl, Br, I) complexes are able to react with excess ZnX₂ in THF to give the series {[TismPriBenz]Zn}[Zn(THF)X₃].
|
119 |
Síntese, caracterização e estudo termoanalítico de isonicotinatos de lantanídeos e ítrio no estado sólido /Nunes, Wilhan Donizete Gonçalves. January 2018 (has links)
Orientador: Flávio Junior Caires / Banca: Edilene Cristina Ferreira / Banca: Roni Antônio Mendes / Banca: Jose Marques Luiz / Banca: Rita de Cassia da Silva / Resumo: O presente trabalho visa à síntese, caracterização e estudo termoanalítico dos isonicotinatos de lantânio(III), cério(III), praseodímio(III), neodímio(III), samário(III), európio(III), gadolínio(III), térbio(III), disprósio(III), hólmio(III), érbio(III), túlio(III), itérbio(III), lutécio(III) e ítrio(III) no estado sólido. A síntese foi realizada por precipitação, tendo como precursores o ácido isonicotínico, e os óxidos dos respectivos metais. A caracterização dos compostos obtidos foi realizada empregando-se métodos analíticos clássicos, e as técnicas de Termogravimetria e calorimetria exploratória diferencial simultânea (TG-DSC), espectroscopia de absorção na região do infravermelho (IV) com transformada de Fourier (FTIR), termogravimetria acoplada à espectroscopia de absorção na região do infravermelho (TG/FTIR), calorimetria exploratória diferencial (DSC), e difração de raios X pelo método do pó (DRXP). A partir dos dados das análises a estabilidade térmica, comportamento térmico, principais produtos gasosos liberados durante a decomposição térmica, estequiometria, quantidade e modo de interação das moléculas de água presentes, cristalinidade e modo de coordenação metal-ligante foram determinados. Os resultados foram ainda comparados com dados da literatura. / Abstract: The present work aims at the synthesis, characterization and thermoanalytical study of isonicotinates of lanthanum (III), cerium (III), praseodymium (III), neodymium (III), samarium (III), europium (III), gadolinium (III), dysprosium (III), holmium (III), erbium (III), thulium (III), ytterbium (III), lutetium (III) and yttrium (III) solid. The synthesis was carried out by precipitation, having as precursors the isonicotinic acid, and the oxides of the respective metals. The characterization of the obtained compounds was carried out using classical analytical methods, and the techniques of thermogravimetry and simultaneous differential scanning calorimetry (TG-DSC), absorption spectroscopy in the infrared (IV) region with Fourier transform (FTIR), coupled thermogravimetry infrared absorption spectroscopy (TG / FTIR), differential scanning calorimetry (DSC), and X-ray diffraction by the powder method (XRD). From the analysis data the thermal stability, thermal behavior, main gaseous products released during thermal decomposition, stoichiometry, amount and mode of interaction of the water molecules present, crystallinity and mode of metal-bonding coordination were determined. The results were also compared with data from the literature. / Doutor
|
120 |
Diverse lanthanoid and lithium complexes with pendant donor amide ligandsScott, Natalie M(Natalie Maree),1976- January 2001 (has links)
Abstract not available
|
Page generated in 0.2064 seconds