There is a growing demand for high-speed arithmetic co-processors for use in applications with computationally intensive tasks. For instance, Fast Fourier Transform (FFT) co-processors are used in real-time multimedia services and financial applications use decimal co-processors to perform large amounts of decimal computations. Using redundant number systems to eliminate word-wide carry propagation within interim operations is a well-known technique to increase the speed of arithmetic hardware units. Redundant number systems are mostly useful in applications where many consecutive arithmetic operations are performed prior to the final result, making it advantageous for arithmetic co-processors. This thesis discusses the implementation of two popular arithmetic co-processors based on redundant number systems: namely, the binary FFT co-processor and the decimal arithmetic co-processor. FFT co-processors consist of several consecutive multipliers and adders over complex numbers. FFT architectures are implemented based on fixed-point and floating-point arithmetic. The main advantage of floating-point over fixed-point arithmetic is the wide dynamic range it introduces. Moreover, it avoids numerical issues such as scaling and overflow/underflow concerns at the expense of higher cost. Furthermore, floating-point implementation allows for an FFT co-processor to collaborate with general purpose processors. This offloads computationally intensive tasks from the primary processor. The first part of this thesis, which is devoted to FFT co-processors, proposes a new FFT architecture that uses a new Binary-Signed Digit (BSD) carry-limited adder, a new floating-point BSD multiplier and a new floating-point BSD three-operand adder. Finally, a new unit labeled as Fused-Dot-Product-Add (FDPA) is designed to compute AB+CD+E over floating-point BSD operands. The second part of the thesis discusses decimal arithmetic operations implemented in hardware using redundant number systems. These operations are popularly used in decimal floating-point co-processors. A new signed-digit decimal adder is proposed along with a sequential decimal multiplier that uses redundant number systems to increase the operational frequency of the multiplier. New redundant decimal division and square-root units are also proposed. The architectures proposed in this thesis were all implemented using Hardware-Description-Language (Verilog) and synthesized using Synopsys Design Compiler. The evaluation results prove the speed improvement of the new arithmetic units over previous pertinent works. Consequently, the FFT and decimal co-processors designed in this thesis work with at least 10% higher speed than that of previous works. These architectures are meant to fulfill the demand for the high-speed co-processors required in various applications such as multimedia services and financial computations.

Speeding up addition is the key to faster digital signal processing (DSP). This can be achieved by exploiting the properties of redundant number systems. Their expanded symbol (digit) alphabet gives them multiple representations for most values. Utilising redundant representations at the output of an adder permits addition to be performed without carry-propagation, yielding fast, constant time performance irrespective of the word length. A resource efficient implementation of this fast adder structure is developed that re-purposes the fast carry logic of low-cost field programmable gate arrays (FPGAs). Experiments confirm constant time addition and show that it outperforms binary ripple carry addition at word lengths of greater than 44 bits in a Xilinx Spartan 3 FPGA and 24 bits in an Altera Cyclone III FPGA. Redundancy also provides other properties that can be exploited for performance gain. Some redundant representations will have more zero-symbols than others. These maximise the opportunities to exploit the multiplicative absorbing and additive identity properties of zero that when exercised reduce superfluous calculations. A serial recoding algorithm is developed that generates a redundant representation for a specified value with as few nonzero symbols as possible. Unlike previously published methods, it accepts a wide specification of number systems including those with irregularly spaced symbol alphabets. A Markov analysis and analysis of the elementary cycles in the formulated state machine provides average and worst case measures for the tested number system. Typically, the average number of non-zero symbols is less than a third and the worst case is less than a half. Further to the increase in zero-symbols, zero-dominance is proposed as a new property of redundant number representations. It promotes a set of representations that have uniquely positioned zero-symbols, in a Pareto-optimal sense. This set covers all representations of a value and is used to select representations to optimise the calculation of a dot-product. The dot-product or vector-multiply is a fundamental operation in DSP, since it is employed in filtering, correlation and convolution. The nonzero partial products can be packed together, substantially reducing the calculation time. The application of redundant number systems provides a two-fold benefit. Firstly, the number of nonzero partial products is reduced. Secondly, a novel opportunity is identified to use the representations in the zero-dominant set to optimise the packing further, gaining an extra 18% improvement. An implementation of the proposed dot-product with partial product packing is developed for a Cyclone II FPGA. It outperforms a quad-multiplier binary implementation in throughput by 50% . Redundant number systems excel at increasing performance in particular DSP subsystems, those that are numerically intensive and consist of considerable accumulation. The conversion back to a binary result is the performance bottleneck in the DSP algorithm, taking a time proportional to a binary adder. Therefore, redundant number systems are best utilised when this conversion cost can be amortised over many fast redundant additions, which is typical in many DSP and communications applications.

Switched-Capacitor Converters (SCC) suffer from a fundamental power loss deficiency which make their use in some applications prohibitive. The power loss is due to the inherent energy dissipation when SCC operate between or outside their output target voltages. This drawback was alleviated in this work by developing two new classes of SCC providing binary and arbitrary resolution of closely spaced target voltages. Special attention is paid to SCC topologies of binary resolution. Namely, SCC systems that can be configured to have a no-load output to input voltage ratio that is equal to any binary fraction for a given number of bits. To this end, we define a new number system and develop rules to translate these numbers into SCC hardware that follows the algebraic behavior. According to this approach, the flying capacitors are automatically kept charged to binary weighted voltages and consequently the resolution of the target voltages follows a binary number representation and can be made higher by increasing the number of capacitors (bits). The ability to increase the number of target voltages reduces the spacing between them and, consequently, increases the efficiency when the input varies over a large voltage range. The thesis presents the underlining theory of the binary SCC and its extension to the general radix case. Although the major application is in step-down SCC, a simple method to utilize these SCC for step-up conversion is also described, as well as a method to reduce the output voltage ripple. In addition, the generic and unified model is strictly applied to derive the SCC equivalent resistor, which is a measure of the power loss. The theoretical predictions are verified by simulation and experimental results.