Reed-Solomon (RS) codes are powerful error-correcting codes that can be found in a wide variety of digital communications and digital data-storage systems. Classical hard decoder of RS code can correct t = (dmin -1) /2 errors where dmin = (n - k+ 1) is the minimum distance of the codeword, n is the length of codeword and k is the dimension of codeword. Maximum likelihood decoding (MLD) performs better than the classical decoding and therefore how to approach the performance of the MLD with less complexity is a subject which has been researched extensively. Applying the bit reliability obtained from channel to the conventional decoding algorithm is always an efficient technique to approach the performance of MLD, although the exponential increase of complexity is always concomitant. It is definite that more enhancement of performance can be achieved if we apply the bit reliability to enhanced algebraic decoding algorithm that is more powerful than conventional decoding algorithm. In 1997 Madhu Sudan, building on previous work of Welch-Berlekamp, and others, discovered a polynomial-time algorithm for decoding low-rate Reed- Solomon codes beyond the classical error-correcting bound t = (dmin -1) /2. Two years later Guruswami and Sudan published a significantly improved version of Sudan's algorithm (GS), but these papers did not focus on devising practical implementation. The other authors, Kotter, Roth and Ruckenstein, were able to find realizations for the key steps in the GS algorithm, thus making the GS algorithm a practical instrument in transmission systems. The Gross list algorithm, which is a simplified one with less decoding complexity realized by a reencoding scheme, is also taken into account in this dissertation. The fundamental idea of the GS algorithm is to take advantage of an interpolation step to get an interpolation polynomial produced by support symbols, received symbols and their corresponding multiplicities. After that the GS algorithm implements a factorization step to find the roots of the interpolation polynomial. After comparing the reliability of these codewords which are from the output of factorization, the GS algorithm outputs the most likely one. The support set, received set and multiplicity set are created by Koetter Vardy (KV) front end algorithm. In the GS list decoding algorithm, the number of errors that can be corrected increases to tcs = n - 1 - lJ (k - 1) n J. It is easy to show that the GS list decoding algorithm is capable of correcting more errors than a conventional decoding algorithm. In this dissertation, we present two hybrid list decoding and Chase-like algorithms. We apply the Chase algorithms to the KV soft-decision front end. Consequently, we are able to provide a more reliable input to the KV list algorithm. In the application of Chase-like algorithm, we take two conditions into consideration, so that the floor cannot occur and more coding gains are possible. With an increase of the bits that are chosen by the Chase algorithm, the complexity of the hybrid algorithm increases exponentially. To solve this problem an adaptive algorithm is applied to the hybrid algorithm based on the fact that as signal-to-noise ratio (SNR) increases the received bits are more reliable, and not every received sequence needs to create the fixed number of test error patterns by the Chase algorithm. We set a threshold according to the given SNR and utilize it to finally decide which unreliable bits are picked up by Chase algorithm. However, the performance of the adaptive hybrid algorithm at high SNRs decreases as the complexity decreases. It means that the adaptive algorithm is not a sufficient mechanism for eliminating the redundant test error patterns. The performance of the adaptive hybrid algorithm at high SNRs motivates us to find out another way to reduce the complexity without loss of performance. We would consider the two following problems before dealing with the problem on hand. One problem is: can we find a terminative condition to decide which generated candidate codeword is the most likely codeword for received sequence before all candidates of received set are tested? Another one is: can we eliminate the test error patterns that cannot create more likely codewords than the generated codewords? In our final algorithm, an optimality lemma coming from the Kaneko algorithm is applied to solve the first problem and the second problem is solved by a ruling out scheme for the reduced list decoding algorithm. The Gross list algorithm is also applied in our final hybrid algorithm. After the two problems have been solved, the final hybrid algorithm has performance comparable with the hybrid algorithm combined the KV list decoding algorithm and the Chase algorithm but much less complexity at high SNRs. / Thesis (M.Sc.Eng.)-University of KwaZulu-Natal, 2005

Thesis (M.S. in Electrical Engineering)--Naval Postgraduate School, September 2009. / Thesis Advisor(s): Robertson, R. Clark. "September 2009." Description based on title screen as viewed on 6 November 2009. Author(s) subject terms: Link-16/JTIDS, (31, 15) Reed-Solomon (RS) coding, 32-ary Orthogonal signaling, Additive White Gaussian Noise (AWGN), Pulse-Noise Interference (PNI), Perfect Side Information (PSI). Includes bibliographical references (p. 49-51). Also available in print.

Thesis (M.S. in Electronic Warfare Systems Engineering)--Naval Postgraduate School, September 2009. / Thesis Advisor(s): Robertson, Ralph C. "September 2009." Description based on title screen as viewed on 5 November 2009. Author(s) subject terms: Link-16/JTIDS, Reed-Solomon (RS) coding, Cyclic Code-Shift Keying (CCSK), Minimum-Shift Keying (MSK), convolutional codes, concatenated codes, perfect side information (PSI), Pulsed-Noise Interference (PNI), Additive White Gaussian Noise (AWGN), coherent detection, noncoherent detection. Includes bibliographical references (p. 79). Also available in print.

No description available.

No description available.

A thesis submitted to the Faculty of Engineering and the Built Environment, University of the Witwatersrand, Johannesburg, in fulfilment of the requirements for the degree of Doctor of Philosophy in the School of Electrical and Information Engineering, 2016 / Reliable and e cient data transmission have been the subject of current research, most especially in realistic channels such as the Rayleigh fading channels. The focus of every new technique is to improve the transmission reliability and to increase the transmission capacity of the communication links for more information to be transmitted. Modulation schemes such as M-ary Quadrature Amplitude Modulation (M-QAM) and Orthogonal Frequency Division Multiplexing (OFDM) were developed to increase the transmission capacity of communication links without additional bandwidth expansion, and to reduce the design complexity of communication systems. On the contrary, due to the varying nature of communication channels, the message transmission reliability is subjected to a couple of factors. These factors include the channel estimation techniques and Forward Error Correction schemes (FEC) used in improving the message reliability. Innumerable channel estimation techniques have been proposed independently, and in combination with di erent FEC schemes in order to improve the message reliability. The emphasis have been to improve the channel estimation performance, bandwidth and power consumption, and the implementation time complexity of the estimation techniques. Of particular interest, FEC schemes such as Reed-Solomon (RS) codes, Turbo codes, Low Density Parity Check (LDPC) codes, Hamming codes, and Permutation codes, are proposed to improve the message transmission reliability of communication links. Turbo and LDPC codes have been used extensively to combat the varying nature of communication channels, most especially in joint iterative channel estimation and decoding receiver structures. In this thesis, attention is focused on using RS codes to improve the message reliability of a communication link because RS codes have good capability of correcting random and burst errors, and are useful in di erent wireless applications. This study concentrates on symbol level soft decision decoding of RS codes. In this regards, a novel symbol level iterative soft decision decoder for RS codes based on parity-check equations is developed. This Parity-check matrix Transformation Algorithm (PTA) is based on the soft reliability information derived from the channel output in order to perform syndrome checks in an iterative process. Performance analysis verify that this developed PTA outperforms the conventional RS hard decision decoding algorithms and the symbol level Koetter and Vardy (KV ) RS soft decision decoding algorithm. In addition, this thesis develops an improved Distance Metric (DM) method of deriving reliability information over Rayleigh fading channels for combined demodulation with symbol level RS soft decision decoding algorithms. The newly proposed DM method incorporates the channel state information in deriving the soft reliability information over Rayleigh fading channels. Analysis verify that this developed metric enhances the performance of symbol level RS soft decision decoders in comparison with the conventional method. Although, in this thesis, the performance of the developed DM method of deriving soft reliability information over Rayleigh fading channels is only veri ed for symbol level RS soft decision decoders, it is applicable to any symbol level soft decision decoding FEC scheme. Besides, the performance of the all FEC decoding schemes plummet as a result of the Rayleigh fading channels. This engender the development of joint iterative channel estimation and decoding receiver structures in order to improve the message reliability, most especially with Turbo and LDPC codes as the FEC schemes. As such, this thesis develops the rst joint iterative channel estimation and Reed- Solomon decoding receiver structure. Essentially, the joint iterative channel estimation and RS decoding receiver is developed based on the existing symbol level soft decision KV algorithm. Consequently, the joint iterative channel estimation and RS decoding receiver is extended to the developed RS parity-check matrix transformation algorithm. The PTA provides design ease and exibility, and lesser computational time complexity in an iterative receiver structure in comparison with the KV algorithm. Generally, the ndings of this thesis are relevant in improving the message transmission reliability of a communication link with RS codes. For instance, it is pertinent to numerous data transmission technologies such as Digital Audio Broadcasting (DAB), Digital Video Broadcasting (DVB), Digital Subscriber Line (DSL), WiMAX, and long distance satellite communications. Equally, the developed, less computationally intensive, and performance e cient symbol level decoding algorithm for RS codes can be use in consumer technologies like compact disc and digital versatile disc. / GS2016

Thesis (MSc (Mathematics))--University of Stellenbosch, 2006. / The main topic of this thesis is the construction of the algebraic geometric codes (Goppa codes), and their decoding by the list-decoding, which allows one to correct beyond half of the minimum distance. We also consider the list-decoding of the Reed–Solomon codes as they are subclass of the Goppa codes, and the determination of the parameters of the non primitive BCH codes. AMS Subject Classification: 4B05, 94B15, 94B35, 94B27, 11T71, 94B65,B70. Keywords: Linear codes, cyclic codes, BCH codes, Reed–Solomon codes, list-decoding, Algebraic Geometric codes, decoding, bound on codes, error probability.

abstract: With tremendous increase in the popularity of networked multimedia applications, video data is expected to account for a large portion of the traffic on the Internet and more importantly next-generation wireless systems. To be able to satisfy a broad range of customers requirements, two major problems need to be solved. The first problem is the need for a scalable representation of the input video. The recently developed scalable extension of the state-of-the art H.264/MPEG-4 AVC video coding standard, also known as H.264/SVC (Scalable Video Coding) provides a solution to this problem. The second problem is that wireless transmission medium typically introduce errors in the bit stream due to noise, congestion and fading on the channel. Protection against these channel impairments can be realized by the use of forward error correcting (FEC) codes. In this research study, the performance of scalable video coding in the presence of bit errors is studied. The encoded video is channel coded using Reed Solomon codes to provide acceptable performance in the presence of channel impairments. In the scalable bit stream, some parts of the bit stream are more important than other parts. Parity bytes are assigned to the video packets based on their importance in unequal error protection scheme. In equal error protection scheme, parity bytes are assigned based on the length of the message. A quantitative comparison of the two schemes, along with the case where no channel coding is employed is performed. H.264 SVC single layer video streams for long video sequences of different genres is considered in this study which serves as a means of effective video characterization. JSVM reference software, in its current version, does not support decoding of erroneous bit streams. A framework to obtain H.264 SVC compatible bit stream is modeled in this study. It is concluded that assigning of parity bytes based on the distribution of data for different types of frames provides optimum performance. Application of error protection to the bit stream enhances the quality of the decoded video with minimal overhead added to the bit stream. / Dissertation/Thesis / M.S. Electrical Engineering 2011

Reed-Solomon codes are a well known family of error-correcting codes with many good properties. However, they require a finite field to operate, limiting the alphabet size to a prime power. In this work, we build a weaker algebraic structure which supports alphabet of any integer size and requires only standard addition, multiplication and division to implement. Then we study a family of error-correcting codes based on matrix multiplication over this structure. We also adapt the Reed-Solomon code principle on this code family and study its properties. We prove and verify experimentally that while a random code of this family has high distance, the Reed-Solomon adaptation fails to perform well. 1

Title: Goppa codes and their applications Author: Bc. Jaroslav Kotil Department: Department of algebra Supervisor: prof. RNDr. Aleš Drápal, CSc., DSc. Abstract: In this diploma paper we introduce Goppa codes, describe their para- metres and inclusion in Alternant codes, which are residual Generalized Reed- Solomon codes, and Algebraic-geometry codes. Aftewards we demonstrate deco- ding of Goppa codes and introduce Wild Goppa codes. We also describe post- quantum cryptography member: McEliece cryptosystem for which no effective attacks with quantum computers are known. We outline a usage of this crypto- system with Goppa codes and describe the security of the cryptosystem together with possible attacks of which the most effective ones are based on information- set decoding. Keywords: Goppa codes, Generalized Reed-Solomon codes, Algebraic-geometry codes, Post-quantum cryptography, McEliece cryptosystem 1