No description available.

Potato ground cover and spectral data were measured in the Columbia Basin during the 1990 growing season. Three spectral were correlated with ground cover; normalized difference, near infrared-red ratio, and the first derivative of the spectral curve at 750 nm. All models were statistically significant at the 99% level. Normalized was most correlated followed by the near infrared-red ratio, and the first derivative of the spectral curve at 750 nm. / Graduation date: 1992

This thesis describes the development of an empirical model of focus beam reflectance measurements (FBRM) and the application of the model to monitoring batch cooling crystallization and extracting information on crystallization kinetics. Batch crystallization is widely used in the fine chemical and pharmaceutical industries to purify and separate solid products. The crystal size distribution (CSD) of the final product greatly influences the product characteristics, such as purity, stability, and bioavailability. It also has a great effect on downstream processing. To achieve a desired CSD of the final product, batch crystallization processes need to be monitored, understood, and controlled. FBRM is a promising technique for in situ determination of the CSD. It is based on scattering of laser light and provides a chord-length distribution (CLD), which is a complex function of crystal geometry. In this thesis, an empirical correlation between CSDs and CLDs is established and applied in place of existing first-principles FBRM models. Built from experimental data, the empirical mapping of CSD and CLD is advantageous in representing some effects that are difficult to quantify by mathematical and physical expressions. The developed model enables computation of the CSD from measured CLDs, which can be followed during the evolution of the crystal population during batch cooling crystallization processes. Paracetamol, a common drug product also known as acetaminophen, is selected as the model compound in this thesis study. The empirical model was first established and verified in a paracetamol-nonsolvent (toluene) slurry, and later applied to the paracetamol-ethanol crystallization system. Complementary to the FBRM measurements, solute concentrations in the liquid phase were determined by in situ infrared spectra, and they were jointly implemented to monitor the crystallization process. The framework of measuring the CSD and the solute concentration allows the estimation of crystallization kinetics, including those for primary nucleation, secondary nucleation, and crystal growth. These parameters were determined simultaneously by fitting the full population balance model to process measurements obtained from multiple unseeded paracetamol-ethanol crystallization runs. The major contributions of this thesis study are (1) providing a novel methodology for using FBRM measurements to estimate CSD; (2) development of an experimental protocol that provided data sets rich in information on crystal growth and primary and secondary nucleation; (3) interpretation of kinetics so that appropriate model parameters could be extracted from fitting population balances to experimental data; (4) identification of the potential importance of secondary nucleation relative to primary nucleation. The protocol and methods developed in this study can be applied to other systems for evaluating and improving batch crystallization processes.

Doctor of Philosophy / Food Science Institute / Jayendra K. Amamcharla / Lactose is commercially produced from whey, whey permeate, or milk permeate as α-lactose monohydrate in crystalline form. Focused Beam Reflectance Measurement (FBRM) as a potential tool for in situ monitoring of lactose crystallization at concentrations relevant to the dairy industry was evaluated. Applicability of FBRM at supersaturated lactose concentrations 50%, 55%, and 60% (w/w) was reported in comparison with Brix values obtained from a Refractometer during isothermal crystallization at temperatures 20ºC and 30ºC. FBRM technique was shown to be a valuable tool for monitoring chord length distributions during lactose crystallization. In a different study, the influence of cooling rate during crystallization of lactose in concentrated permeates was studied. Three cooling rates accounting for approximately 17, 11, and 9 h were applied during lactose crystallization to evaluate the lactose crystal yield and quality of lactose crystals. There was no significant difference (P>0.05) found in lactose crystal yield, mean particle size obtained at the end of crystallization. This study suggested that increasing the cooling rate during lactose crystallization within the range explained in this study can save approximately 8 h of crystallization time. These studies evaluated FBRM as a potential tool to monitor lactose crystal chord lengths and counts. Also, process improvements were suggested to increase the productivity of lactose crystallization process by reducing the crystallization time. In chapters 5 and 6, calcium-reduced milk protein concentrates (MPCs) were used as an ingredient to improve the stability of high-protein dairy beverages. Heat stability increased significantly (P>0.05) in 8% protein solutions made from 20% calcium-reduced MPC. A significant increase in heat stability was observed in beverages formulated with 20% calcium-reduced MPC in the absence of chelating agent. In another study, it was evident that the dairy beverage formulation with 20% calcium-reduced MPC showed no sedimentation and age gelation indicating an improved storage stability. These studies confirmed that 20% calcium reduced MPC contributed towards improved heat stability and storage stability of the high-protein beverages.

No description available.

No description available.

This thesis describes a concentrating solar power using a Stirling engine. The problems encountered during construction and operation. I focus mainly on problems derating dusting and icing. The second part of this work is the experimental design of the stand with long-term measurement of dusting depending on the reflectivity of mirrors and their degradation under various conditions. First measurement is stated and estimation of long-term results.