The shear capacity of reinforced concrete pier caps in existing bridge support systems can be a factor which limits the capacity of an existing bridge. In their usual configuration, pier caps behave as deep beams and have the ability to carry load through tied arch action after the formation of diagonal cracks. Externally bonded fiber reinforced polymer (FRP) reinforcement has been shown to increase the shear capacity of reinforced concrete members which carry load through beam action. However, there is an insufficient amount of research to make it a viable strengthening system for beams which carry load through arch action, such as pier caps. Accordingly, this research was aimed at investigating the behavior of reinforced concrete pier caps through a coordinated experimental and analytical program and to recommend an external strengthening method for pier caps with perceived deficiencies in shear strength. The experimental study was performed on laboratory specimens based on an existing bridge in Georgia. A number of factors were examined, including size, percentage longitudinal reinforcement and crack control reinforcement. The results showed that increasing the longitudinal tension reinforcement increased the beam capacity by changing the shape of the tied arch. In contrast, the presence of crack control reinforcement did not change the point at which diagonal cracking occurred, but it did increase the ultimate capacity by reinforcing the concrete against splitting. The results of the experimental study were used in conjunction with a larger database to examine different analytical methods for estimating the ultimate capacity of deep beams, and a new method was developed for the design of external strengthening. Two specimens were tested with externally bonded FRP reinforcement applied longitudinally to increase the strength of the tension tie. The test results correlated well with the proposed method of analysis and showed that increasing the strength of the longitudinal tension tie is an effective way to increase the strength of a reinforced concrete deep beam.

yes / A 9 × 18 × 1 feed-forward neural network (NN) model trained using a resilient back-propagation algorithm and early stopping technique is constructed to predict the shear strength of deep reinforced concrete beams. The input layer covering geometrical and material properties of deep beams has nine neurons, and the corresponding output is the shear strength. Training, validation and testing of the developed neural network have been achieved using a comprehensive database compiled from 362 simple and 71 continuous deep beam specimens. The shear strength predictions of deep beams obtained from the developed NN are in better agreement with test results than those determined from strut-and-tie models. The mean and standard deviation of the ratio between predicted capacities using the NN and measured shear capacities are 1·028 and 0·154, respectively, for simple deep beams, and 1·0 and 0·122, respectively, for continuous deep beams. In addition, the trends ascertained from parametric study using the developed NN have a consistent agreement with those observed in other experimental and analytical investigations.

Several reinforced concrete bent caps (deep beams) in Texas have developed significant diagonal cracks in service. The cracking in two bent caps was so extensive that costly retrofits were implemented to strengthen the structures. Strut-and-tie modeling is currently recommended in most U.S. design specifications for the design of reinforced concrete bent caps and deep beams. Designers have expressed concerns with the lack of clarity and serviceability-related considerations in strut-and-tie model design provisions. Due to concerns with strut-and-tie modeling design provisions and field problems of in-service bent caps, TxDOT Project 5253 was funded. Several tasks conducted within Project 5253 are addressed in this dissertation. The effects of minimum web reinforcement and member depth on the strength and serviceability behavior of deep beams are presented. The transition between deep beam shear capacity and sectional shear capacity near a shear-span-to-depth (a/d) ratio of 2 is addressed. A service-load shear check to limit diagonal cracking in service is outlined. Lastly, a simple chart that correlates the maximum width of diagonal cracks in a deep beam to its residual capacity is developed. To accomplish the objectives of Project 5253, thirty-seven tests were conducted on reinforced concrete beams with the following cross-sectional dimensions: 21”x23”, 21”x42”, 21”x44”, 21”x75”, and 36”x48.” The specimens were loaded with a/d ratios of 1.2, 1.85, and 2.5. The test specimens are among the largest reinforced concrete deep beams in the literature. To supplement the findings of the experimental program, a database of deep beam test results was compiled. Entries in the database that lacked sufficient information and that did not meet established cross-sectional size or web reinforcement criteria were filtered from the database. The use of the database in conjunction with the experimental program enabled each objective to be addressed from both broad and specific viewpoints. Several recommendations for improving the strength and serviceability design of deep beams are presented including a minimum web reinforcement requirement, provisions to ease the transition between calculated deep beam and sectional shear capacity, and a design check to limit diagonal cracking in service. / text