Spelling suggestions: "subject:"reinforcing barn -- matematerials"" "subject:"reinforcing barn -- datenmaterials""
1 |
Bond strength investigations and structural applicability of composite fiber-reinforced polymer (FRP) rebarsKachlakev, Damian I. 30 May 1997 (has links)
The composite FRP rebars research at Oregon State University was initiated in
1993 principally to develop a non-metallic hollow reinforcement. It was recognized that
the tensile properties of such reinforcement are unquestionably superior to steel, but its
performance in concrete could be problematic. The bond between FRP rebars and
concrete was identified as a critical area of concern.
The purpose of this study is (i) to analyze a variety of FRP and steel reinforcing
units; (ii) to advance the knowledge of bond mechanism, failure modes, and parameters
influencing the bond strength; (iii) to compare composite rebars to conventional steel and
to assess their applicability as reinforcing members. Commercially available FRP rebars
were investigated. Particular emphasis was given to a hollow glass FRP rod designed at
Oregon State University.
Several parameters were investigated, including: failure mode, concrete
compressive strength, rebar diameter and circumference/cross section ratio, embedment
length, concrete cover, and microstructure of the composite rebars.
It was recognized that the ASTM C234-90 pull-out standard is test of concrete
strength. Therefore a modified pull-out test was developed for evaluating the bond
strength behavior. A newly developed European bond test procedure was compared with
locally modified version of the pull-out method. The new procedure was used for the first
time in the United States.
The study demonstrated a phenomenon, not reported in the published research at
this time, defined as a size effect. The size effects result in lower bond strength with
increasing area of the interface between FRP bars and concrete.
The next phase of the research was dedicated to the hollow glass FRP rebar. The
goal was to compare its bond properties to conventional steel and solid FRP bars. The
study led to two new phenomena not described in the literature previously. Results
showed that the concrete compressive strength does not significantly affect the bond
strength. This observation was in contradiction with the bond strength theory which
considers the concrete strength as major variable. The second observation revealed
significant difference in bond performance between bars with different microstructures. It
is recommended that microstructure of the FRP bars be considered as a variable when
investigating bond strength. / Graduation date: 1998
|
Page generated in 0.1046 seconds