No description available.

Compressibility profoundly affects many aspects of turbulence in high-speed flows - most notably stability characteristics, anisotropy, kinetic-potential energy interchange and spectral cascade rate. Many of the features observed in compressible flows are due to the changing nature of pressure. Whereas for incompressible flows pressure merely serves to enforce incompressibility, in compressible flows pressure becomes a thermodynamic variable that introduces a strong coupling between energy, state, and momentum equations. Closure models that attempt to address compressibility effects must begin their development from sound first-principles related to the changing nature of pressure as a flow goes from incompressible to compressible regime. In this thesis, a unified framework is developed for modeling pressure-related compressibility effects by characterizing the role and action of pressure at different speed regimes. Rapid distortion theory is used to examine the physical connection between the various compressibility effects leading to model form suggestions for the pressure-strain correlation, pressure-dilatation and dissipation evolution equation. The pressure-strain correlation closure coefficients are established using fixed point analysis by requiring consistency between model and direct numerical simulation asymptotic behavior in compressible homogeneous shear flow. The closure models are employed to compute high-speed mixing-layers and boundary layers in a differential Reynolds stress modeling solver. The self-similar mixing-layer profile, increased Reynolds stress anisotropy and diminished mixing-layer growth rates with increasing relative Mach number are all well captured. High-speed boundary layer results are also adequately replicated even without the use of advanced thermal-flux models or low Reynolds number corrections. To reduce the computational burden required for differential Reynolds stress calculations, the present compressible pressure-strain correlation model is incorporated into the algebraic modeling framework. The resulting closure is fully explicit, physically realizable, and is a function of mean flow strain rate, rotation rate, turbulent kinetic energy, dissipation rate, and gradient Mach number. The new algebraic model is validated with direct numerical simulations of homogeneous shear flow and experimental data of high-speed mixing-layers. Homogeneous shear flow calculations show that the model captures the asymptotic behavior of direct numerical simulations quite well. Calculations of plane supersonic mixing-layers are performed and comparison with experimental data shows good agreement. Therefore the algebraic model may serve as a surrogate for the more computationally expensive differential Reynolds stress model for flows that permit the weak-equilibrium simplification.

The premise of the work presented here is to use a common analytical tool, Computational Fluid dynamics (CFD), along with a difference turbulence models. Eddy viscosity models as well as state-of-the-art Large Eddy Simulation (LES) were used to study the flow past bluff bodies. A suitable CFD code (CFX5.6b) was selected and implemented. Simulation of turbulent transport for the gas through the gaps of the randomly distributed spherical fuel elements (pebbles) was performed. Although there are a number of numerical studies () on flows around spherical bodies, none of them use the necessary turbulence models that are required to simulate flow where strong separation exists. With the development of high performance computers built for applications that require high CPU time and memory; numerical simulation becomes one of the more effective approaches for such investigations and LES type of turbulence models can be used more effectively. Since there are objects that are touching each other in the present study, a special approach was applied at the stage of building computational domain. This is supposed to be a considerable improvement for CFD applications. Zero thickness was achieved between the pebbles in which fission reaction takes place. Since there is a strong pressure gradient as a result of high Reynolds Number on the computational domain, which strongly affects the boundary layer behavior, heat transfer in both laminar and turbulent flows varies noticeably. Therefore, noncircular curved flows as in the pebble-bed situatio n, in detailed local sense, is interesting to be investigated. Since a compromise is needed between accuracy of results and time/cost of effort in acquiring the results numerically, selection of turbulence model should be done carefully. Resolving all the scales of a turbulent flow is too costly, while employing highly empirical turbulence models to complex problems could give inaccurate simulation results. The Large Eddy Simulation (LES) method would achieve the requirements to obtain a reasonable result. In LES, the large scales in the flow are solved and the small scales are modeled. Eddy viscosity and Reynolds stress models were also be used to investigate the applicability of these models for this kind of flow past bluff bodies at high Re numbers.

The present study considers the numerical simulation of the different flow characteristics involved in the conjugate heat transfer analysis of an internally cooled gas turbine blade. Conjugate simulations require full coupling of convective heat transfer in fluid regions to the heat diffusion in solid regions. Therefore, accurate prediction of heat transfer quantities on both external and internal surfaces has the uppermost importance and highly connected with the performance of the employed turbulence models. The complex flow on both surfaces of the internally cooled turbine blades is caused from the boundary layer laminar-to-turbulence transition, shock wave interaction with boundary layer, high streamline curvature and sequential flow separation. In order to discover the performances of different turbulence models on these flow types, analyses have been conducted on five different experimental studies each concerned with different flow and heat transfer characteristics. Each experimental study has been examined with four different turbulence models available in the commercial software (ANSYS FLUENT13.0) to decide most suitable RANS-based turbulence model. The Realizable k-&epsilon / model, Shear Stress Transport k-&omega / model, Reynolds Stress Model and V2-f model, which became increasingly popular during the last few years, have been used at the numerical simulations. According to conducted analyses, despite a few unreasonable predictions, in the majority of the numerical simulations, V2-f model outperforms other first-order turbulence models (Realizable k-&epsilon / and Shear Stress Transport k-&omega / ) in terms of accuracy and Reynolds Stress Model in terms of convergence.

This master's thesis analyses fluid flow in an open cylindrical tank with vortex using numerical simulation. The theoretical part introduces a set of equations governing fluid flow and relations used to describe vortex motion. A general overview of terms used in computational fluid dynamics is presented. The experimental section consists of three parts. The vortex modelling is performed using ANSYS Fluent software. Data are consequently analysed within ANSYS CFD-Post software tool. Special focus is put on the vortex shape that is fitted with a curve corresponding to a probability density function of the Cauchy distribution. Results are then plotted in MATLAB software.

Submitted by Johnny Rodrigues (johnnyrodrigues@ufcg.edu.br) on 2018-03-23T01:44:32Z No. of bitstreams: 1 GUSTAVO GOMES SAMPAIO CURSINO - TESE PPGEQ 2016.pdf: 5939681 bytes, checksum: 518baf4150ea2fb7085706252276b9fa (MD5) / Made available in DSpace on 2018-03-23T01:44:32Z (GMT). No. of bitstreams: 1 GUSTAVO GOMES SAMPAIO CURSINO - TESE PPGEQ 2016.pdf: 5939681 bytes, checksum: 518baf4150ea2fb7085706252276b9fa (MD5) Previous issue date: 2016-04-18 / Este trabalho teve o propósito de determinar o comportamento dos gases na seção de radiação de um combustor de ar que pertence a uma planta industrial. O corpo metálico do equipamento rompeu em seu primeiro ano de operação, devido a um problema conceitual em sua geometria. A fluidodinâmica computacional (CFD), por meio do método dos volumes finitos, foi utilizada para desenvolver um modelo tridimensional que pudesse reproduzir o perfil de temperatura e o comportamento do fluxo do ar de combustão no equipamento. Na simulação, através do uso do software ANSYS CFX, foram utilizados: (i) o modelo de turbulência Reynolds Stress Model (RSM); (ii) as malhas hexaédrica, tetraédrica e prismática; (iii) o modelo de radiação P-1; e (iv) o modelo de combustão Eddy Dissipation Concept (EDC). Como resultado, foram apresentadas quatro possíveis mudanças na geometria do combustor de ar que, caso adotadas, eliminariam os riscos de novas falhas e garantiriam a continuidade operacional da unidade de processo. / This paper has the objective to describe the behavior of the flow and temperature of the flue gas in the radiation section of the vessel used to preheat air in a combustor. The equipment failed in its first operational year, due to a conceptual problem in its geometry. The CFD code based on finite volume method was applied to simulate the physical model of combustor using the ANSYS CFX software, reproducing the main features of the preheater. The simulation had considered: (i) Reynolds Stress Model (RSM) as turbulence model, (ii) The meshes applied were the hexahedral, tetrahedral and prismatic, (iii) P-1 was used as the radiation model and (iv) Eddy Dissipation Concept (EDC) as combustion model. Through the simulation was possible to propose four different kind of combustor geometry modification, that the application of anyone of them would eliminate the risk of new failures, ensuring the unit production availability.