No description available.

No description available.

No / Porous road surfaces offer an effective means of reducing the generation and propagation of noise from road traffic. However, the porosity of these surfaces can deteriorate over time, leading to a reduction in their noise reducing properties. Efficient methods are therefore required for monitoring this performance. Existing techniques for performing in-situ measurements of acoustic absorption are unsuitable for use within the traffic stream. Static measurements using time domain Maximum Length Sequence (MLS) based techniques have been demonstrated to offer advantages over traditional techniques, presenting the opportunity for measurements under dynamic conditions. This paper describes the design of a system for carrying out dynamic MLS-based measurements. Results are presented which demonstrate that stable dynamic measurements can be carried out at speeds of up to 30 km/h.

- / -

Master´s thesis is interested in the problems of low-noise road surfaces. The theoretical part describes noise, sources of noise, the low-noise road surfaces and the practical part describes two proposals of low-noise stone mastic asphalt SMA 8 LA.

The Master’s thesis is focused on low-noise asphalt mixtures in general, namely asphalt concrete for very thin layers with low noise (BBTM 8 NH) and stone mastic asphalt with low noise (SMA 8 NH). The first half of the thesis describes basic types of asphalt mixtures with low noise, requirements for raw materials (aggregates and asphalt), noise emissions and their measurement methods. The second part deals the design of BBTM 8 NH and SMA 8 NH so that they have the same voids. Subsequently, their parameters were tested. Acoustic absorption, resistence against permanent deformation and stiffness. Test methods are described and evaluated.