The thesis is focused on the design and assessment of selected elements of load-bearing structure of hospital pavilion. This pavilion consisted of board frame with additionally lined self-supporting perimeter cover. Selected elements of the structure are locally supported slab, columns, foundation pad and staircase . Computational model was assembled of the software RFEM5. Internal forces locally supported slab were verified by manual calculation. The design documentation consist of engineering report, structural analysis and shape and reinforcements drawings of selected structural elements.

The thesis solves the construction of the pension and deals with the assessment of the impact of the thermal insulation on expenses related to the operation of the property. The pension is situated on the street Valtická in Mikulov. The building has one floor and is founded on strip foundations. Roofing of the house is solved with irregular gable roof. In the first part of the thesis is a theoretical introduction mentions the possibility of building insulation and insulation methods. In the practical part of the thesis is an assessment of the heat transfer coefficient of the pension and costs associated with heating. There is also a proposal for modifications of the envelope construction with assessment of the heat factor and there are also proposed modifications to reduce the costs of operating the property.

This diploma thesis solves the project of four-storey, partly cellared mountain pension situated in the plant number 645/2 in the cadastral area in Deštné in Orlické hory. The building has a capacity of 44 seats to accommodate 72 persons in the restaurant and 57 persons in the wellness center. There is a wellness center with fitness room and engine room of air-conditioning system in the basement. There is an entrance hall with hotel base, restaurant, sanitary facilities and utility room with boiler room on the first floor. The second and third floor is designed for accommodation. There is an outdoor terrace of restaurant. The building has a load-bearing wall system. The load-bearing walls and the partition walls are bricked up of the porous concrete YTONG bricks and sand-lime bricks SILKA. The walls are insulated of mineral wool thickeness 200 mm and EPS Perimeter thickeness 140 mm underground section and plinth area. The ceiling structure are made of the prestressed hollow core panels spiroll thickness 250 mm and wooden beamed ceiling. There is a saddle wooden roof. The windows and the doors are made by the company Progress. The part of facade of the building is ventilated. This project is designed by the computer software ArchiCAD.

The master's thesis deals with static analysis of selected reinforced concrete elements of an apartment building. Specifically solved are the reinforced concrete slab of above-ground floor, point-supported slab of underground garage, the most exposed column, staircase, load-bearing wall of shear core, external load-bearing wall and building foundation on piles. Load effects were calculated using the Axis VM 12 software. Design of foundation was solved in the Geo 5 software. The thesis includes shape drawing documentation of selected elements.

The diploma thesis is focused on a structural analysis of a multi-storey office building. The Loadbearing structure is made of cast-in-place reinforced concrete. In the thesis there is analysed a selected floor slab, a column, a foundation pad, a part of loadbearing wall and a precast staircase. Computation of internal forces is carried out by computational software SCIA Engineer. The Results from the software are verificated via simplified manual method. Assessment of a structure is done according to valid standards and regulations.

This thesis deals with influence on structure changes of panel building. It is about type B70/R, to which was collected necessary design documentation. Static analysis is performed by ANSYS software. 29 models was created to focus on stress and displacements. Verification of selected wall according to Eurocode is also included.

The aim of the diploma thesis is static solution of selected parts of the residental house with formwork drawings and reinforcement drawings of designed structures included. Project describes the design and assessment of the monolitic slab structure, precast stair flights, basement loadbearing wall and retaining wall. For calculation of the internal forces was used software Scia Engineer.

The content of the thesis is a proposal of steel load-bearing structure (carrying structure of a steel) bridge of the span of 31+74+31m with the bottom bridge deck taking over the second-class road in the territory of Olomouc city. The bridge deck is created by composite steel-concrete slab with crossbars. The solution was focused on using arched construction in the middle of the bridge with different tilt of arches to the horizontal central axis of the bridge. Under the term of the solution four alternatives have been calculated. The most optimal solution was selected and processed in detail. The calculations were made in compliance with the Czech technical norms ČSN EN.

The thesis is focused on the overview of the diagnostic methods for engineering surveys reinforced concrete constructions. The practical part explains engineering surveys of industrial building, evaluation of concrete strength on existing building and results from search reinforcements on individual elements. Next part is focused on load testing precast floor slab removed from construction and evaluation load capacity. The last part include structural design of elected parts (precast floor slab and beam).

This diploma thesis deals with the static review of structure for a football pitch. It is crosswise prestressed reinforced sliding plate with variable cross section. Assessment of the elements was done according to limit states. Internal forces from the load effects were calculated using the SW SciaEngineer 2015.1. The elements were assessed by SW Idea StatiCa 6. The main outputs of this static calculation are drawings of the shape and drawings of the reinforcement.