Spelling suggestions: "subject:"STM break actionfunction"" "subject:"STM break functionaction""
1 |
Contact and Length Dependent Effects in Single-Molecule ElectronicsJanuary 2013 (has links)
abstract: Understanding charge transport in single molecules covalently bonded to electrodes is a fundamental goal in the field of molecular electronics. In the past decade, it has become possible to measure charge transport on the single-molecule level using the STM break junction method. Measurements on the single-molecule level shed light on charge transport phenomena which would otherwise be obfuscated by ensemble measurements of groups of molecules. This thesis will discuss three projects carried out using STM break junction. In the first project, the transition between two different charge transport mechanisms is reported in a set of molecular wires. The shortest wires show highly length dependent and temperature invariant conductance behavior, whereas the longer wires show weakly length dependent and temperature dependent behavior. This trend is consistent with a model whereby conduction occurs by coherent tunneling in the shortest wires and by incoherent hopping in the longer wires. Measurements are supported with calculations and the evolution of the molecular junction during the pulling process is investigated. The second project reports controlling the formation of single-molecule junctions by means of electrochemically reducing two axial-diazonium terminal groups on a molecule, thereby producing direct Au-C covalent bonds in-situ between the molecule and gold electrodes. Step length analysis shows that the molecular junction is significantly more stable, and can be pulled over a longer distance than a comparable junction created with amine anchoring bonds. The stability of the junction is explained by the calculated lower binding energy associated with the direct Au-C bond compared with the Au-N bond. Finally, the third project investigates the role that molecular conformation plays in the conductance of oligothiophene single-molecule junctions. Ethyl substituted oligothiophenes were measured and found to exhibit temperature dependent conductance and transition voltage for molecules with between two and six repeat units. While the molecule with only one repeat unit shows temperature invariant behavior. Density functional theory calculations show that at higher temperatures the oligomers with multiple repeat units assume a more planar conformation, which increases the conjugation length and decreases the effective energy barrier of the junction. / Dissertation/Thesis / Ph.D. Materials Science and Engineering 2013
|
2 |
New Measurement Techniques and Their Applications in Single Molecule ElectronicsJanuary 2012 (has links)
abstract: Studying charge transport through single molecules tethered between two metal electrodes is of fundamental importance in molecular electronics. Over the years, a variety of methods have been developed in attempts of performing such measurements. However, the limitation of these techniques is still one of the factors that prohibit one from gaining a thorough understanding of single molecule junctions. Firstly, the time resolution of experiments is typically limited to milli to microseconds, while molecular dynamics simulations are carried out on the time scale of pico to nanoseconds. A huge gap therefore persists between the theory and the experiments. This thesis demonstrates a nanosecond scale measurement of the gold atomic contact breakdown process. A combined setup of DC and AC circuits is employed, where the AC circuit reveals interesting observations in nanosecond scale not previously seen using conventional DC circuits. The breakdown time of gold atomic contacts is determined to be faster than 0.1 ns and subtle atomic events are observed within nanoseconds. Furthermore, a new method based on the scanning tunneling microscope break junction (STM-BJ) technique is developed to rapidly record thousands of I-V curves from repeatedly formed single molecule junctions. 2-dimensional I-V and conductance-voltage (G-V) histograms constructed using the acquired data allow for more meaningful statistical analysis to single molecule I-V characteristics. The bias voltage adds an additional dimension to the conventional single molecule conductance measurement. This method also allows one to perform transition voltage spectra (TVS) for individual junctions and to study the correlation between the conductance and the tunneling barrier height. The variation of measured conductance values is found to be primarily determined by the poorly defined contact geometry between the molecule and metal electrodes, rather than the tunnel barrier height. In addition, the rapid I-V technique is also found useful in studying thermoelectric effect in single molecule junctions. When applying a temperature gradient between the STM tip and substrate in air, the offset current at zero bias in the I-V characteristics is a measure of thermoelectric current. The rapid I-V technique allows for statistical analysis of such offset current at different temperature gradients and thus the Seebeck coefficient of single molecule junctions is measured. Combining with single molecule TVS, the Seebeck coefficient is also found to be a measure of tunnel barrier height. / Dissertation/Thesis / Ph.D. Electrical Engineering 2012
|
3 |
The Formation of Two Dimensional Supramolecular Structures and Their Use in Studying Charge Transport at the Single Molecule Level at the Liquid-Solid InterfaceAfsari Mamaghani, Sepideh January 2015 (has links)
Understanding charge transport through molecular junctions and factors affecting the conductivity at the single molecule level is the first step in designing functional electronic devices using individual molecules. A variety of methods have been developed to fabricate metal-molecule-metal junctions in order to evaluate Single Molecule Conductance (SMC). Single molecule junctions usually are formed by wiring a molecule between two metal electrodes via anchoring groups that provide efficient electronic coupling and bind the organic molecular backbone to the metal electrodes. We demonstrated a novel strategy to fabricate single molecule junctions by employing the stabilization provided by the long range ordered structure of the molecules on the surface. The templates formed by the ordered molecular adlayer immobilize the molecule on the electrode surface and facilitate conductance measurements of single molecule junctions with controlled molecular orientation. This strategy enables the construction of orientation-controlled single molecule junctions, with molecules lacking proper anchoring groups that cannot be formed via conventional SMC methods. Utilizing Scanning Tunneling Microscopy (STM) imaging and STM break junction (STM-BJ) techniques combined, we employed the molecular assembly of mesitylene to create highly conductive molecular junctions with controlled orientation of benzene ring perpendicular to the STM tip as the electrode. The long range ordered structure of mesitylene molecules imaged using STM, supports the hypothesis that mesitylene is initially adsorbed on the Au(111) with the benzene ring lying flat on the surface and perpendicular to the Au tip. Thus, long range ordered structure of mesitylene facilitates formation of Au-π-Au junctions. Mesitylene molecules do not have standard anchoring groups providing enough contact to the gold electrode and the only assumable geometry for the molecules in the junction is via direct contact between Au and the π system of the benzene ring in mesitylene. SMC measurements for Au/mesitylene/Au junctions results in a molecular conductance value around 0.125Go, two orders of magnitude higher than the measured conductance of a benzene ring connected via anchoring groups. We attributed this conductance peak to charge transport perpendicular to the benzene ring due to direct coupling between the π system and the gold electrode that happens in planar orientation. The conductance we measured for planar orientation of benzene ring is two order of magnitude larger than conductance of junctions formed with benzene derivatives with conventional linkers. Thus, altering the orientation of a single benzene-containing molecule between the two electrodes from planar orientation to the upright attached via the linkers, results in altering the conductivity in a large order. Based on these findings, by utilizing STM imaging and STM-BJ in an electrochemical environment including potential induced self-assembly formation of terephthalic acid, we designed an electrochemical single molecule switch. Terephthalic acid forms large domains of ordered structure on negatively charged Au(111) surface under negative electrochemical surface potentials with the benzene ring lying flat on the surface due to hydrogen bonding between carboxylic acid groups of neighboring molecules. Formation of long range ordered structure facilitates direct contact between the π system of the benzene ring and the gold electrodes resulting in the conductance peak. On positively charged Au(111), deprotonation of carboxylic acid groups leads to absence of long range ordered structure of molecules with planar orientation and absence of the conductance peak. In this case alternating the surface (electrode) potential from negative to positive charge densities induces a transition in the adlayer structure on the surface and switches conductance value. Hence, electrochemical surface potential can, in principle, be employed as an external stimulus to switch single molecule arrangement on the surface and the conductance in the junction. The observation of conductance switching due to molecule’s arrangement in the junction lead to the hypothesis that for any benzene derivative, an orientation-dependent conductance in the junction due to the contact geometry (i.e. electrode-anchoring groups versus direct electrode-π contact) should be expected. Conventional techniques in fabricating single molecule junctions enable accessing charge transport along only one direction, i.e., between two anchoring groups. However, molecules such as benzene derivatives are anisotropic objects and we are able to measure an orientation-dependent conductance. In order to systematically study anisotropic conductivity at single molecule level, we need to measure the conductance in different and well-controlled orientations of single molecules in the junction. We employed the same EC-STM-BJ set up for SMC measurements and utilize electrochemical potential of the substrate (electrode) as the tuning source to variate the orientation of the single molecule in the junction. We investigated single molecule conductance of the benzene rings with carboxylic acid functional groups in two orientations: one with the benzene ring bridging between two electrodes using carboxylic acids as anchoring groups (upright); and one with the molecule lying flat on the substrate perpendicular to the STM tip (planar). Physisorption of these species on the Au (111) single crystal electrode surface at negative electrochemical potentials results in an ordered structure with the benzene ring in a planar orientation. Positive electrochemical potentials cause formation of the ordered structure with molecules standing upright due to coordination of a deprotonated carboxyl groups to the electrode surface. Thus, formation of the single molecule junction and consequently conductivity measurements is facilitated in two directions for the same molecule and anisotropic conductivity can be studied. In engineering well-ordered two-dimensional (2-D) molecular structures with controlled assembly of molecular species, pH can be employed as another tuning source for the molecular structures and adsorption in experiments conducted in aqueous solutions. Based on simple chemical principles, amine (NH2) groups are hydrogen bond acceptors and donors. Amines are soluble in water and protonation results in protonated (NH3+) and unprotonated (NH2) amine groups in acidic and moderately acidic/neutral solutions, respectively. Thus, amines are suitable molecular building blocks for fabricating 2-D supramolecular structures where pH is employed as a knob to manipulate intermolecular hydrogen bonding leading to phase transitions. We investigated pH induced structural changes in the 1,3,5–triaminobenzene (TAB) monolayer and the formation/disruption of hydrogen bonds between neighboring molecules. Our STM images indicate that in the concentrated acidic solution, the protonated amine groups of TAB are not able to form H-bonds and long range ordered structure of TAB does not form on the Au(111) surface. However, in moderately acidic solution (pH ~ 5.5) at room temperature, protonation on the ring carbon atom generates species capable of forming H-bonds leading to the formation of the long range ordered structures of TAB molecules. Utilizing EC-STM set up, we investigated the controllable fabrication of a TAB 2-D supramolecular structure based on amine-amine hydrogen bonding and effect of pH in formation of ordered/disordered TAB network. / Chemistry
|
Page generated in 0.068 seconds