No description available.

Made available in DSpace on 2016-08-19T12:56:46Z (GMT). No. of bitstreams: 1 Dissertacao Joseany.pdf: 1293821 bytes, checksum: c1a750664ab89568783ec0c6aa91c9b1 (MD5) Previous issue date: 2013-06-05 / Coordenação de Aperfeiçoamento de Pessoal de Nível Superior / Metal traces are often detected in biodiesel samples due to its presence in the raw materials or solubilization during its manufacturing. Thus, this work aims to propose an electroanalytical methodology for the direct determination of Ca²⁺ in biodiesel using with a glassy carbon electrode. The metal quantification was developed according to Anodic Stripping Voltammetry Mode square-wave (SWASV) technique applying EDTA as the complexing agent. Thus, all samples were pretreated according to wet acid digestion processing and microwave radiation. Therefore, a solution of 4 mL of ultrapure nitric acid (HNO₃), 2 mL of hydrogen peroxide (H₂O₂) and 1 mL deionized water were added to 300 mg sample of biodiesel. Later, such mixtures was thermal treated at 90 °C using 300 W (10 min) and 450 W (5 min) of microwave radiations. The analytical determinations were carried out using ammonium buffer (0.01 mol Lˉ¹, pH = 9.4) as supporting electrolyte and EDTA (1x10ˉ² mol Lˉ¹) as ligand. The optimized voltammetric conditions were EDEP = -1000 mV; tpre = 120 s; Frequency = 30 Hz; Amplitude = 100 mV and ΔEstep = 15 mV. The accuracy was verified by recovery tests. In all cases, the metal quantizations were statistically consistent considering the t-test student for a confidence level of 95%. The CV values were lower than 11%, the recoveries were between 102.9% to 102.4% and the values of the detection limits were 1.9 x 10ˉ⁸ and 1.6 x 10ˉ9 mol Lˉ¹ for the samples, showing good accuracy and sensitivity of the proposed method. The values obtained for the samples ranged from 2.8 x 10ˉ⁸ ± 5.0 x 10ˉ⁸ mol Lˉ¹ and 3.4 x 10ˉ7 ± 5.0 x 10ˉ9 mol Lˉ¹ for Ca²⁺ in evaluated biodiesel. / A presença de metais no biodiesel está diretamente relacionada com a matéria-prima utilizada e também com o processo utilizado para a obtenção do biodiesel. Este trabalho apresenta um procedimento eletroanalítico simples para a determinação direta de Ca2+ em biodiesel com um eletrodo de carbono vítreo. A determinação foi feita com a técnica Voltametria de Redissolução Anódica no modo onda quadrada (SWASV), usando-se o EDTA como agente complexante. As amostras de biodiesel foram submetidas a um processo de digestão ácida por via úmida por radiação, em sistema fechado, com o uso de um microondas. O procedimento para digestão das amostras foi realizado pela adição de 4 mL de ácido nítrico ultrapuro (HNO₃), 2 mL de peróxido de hidrogênio (H₂O₂) e 1 mL de água deionizada em 300 mg de amostra de biodiesel. As amostras foram aquecidas a uma temperatura de 90 oC, durante 10 minutos, em potência de 300 W e 5 minutos em potência de 450 W. As determinações foram feitas utilizando-se tampão amônio (0,01 mol Lˉ¹), pH 9,4, como eletrólito suporte e EDTA 1 x 10ˉ² mol Lˉ¹ como ligante, nas seguintes condições: potencial de deposição (Edep) = -1000 mV; tempo de pré-concentração (tpré) = 120 s; frequência (Freq.) = 30 Hz; amplitude (Amp) =100 mV e potencial de escada (ΔEescada) =15 mV. A exatidão do método foi verificada através de testes de recuperação. Os resultados foram concordantes, estatisticamente, considerando o teste-t de student para um nível de confiança de 95%. Os valores de CV foram menores que 11%, as recuperações foram entre 102,9 % e 102,4 % e os valores dos limites de detecção foram de 1,9 x 10ˉ⁸ e de 1,6 x 10ˉ9 mol Lˉ¹ para as amostras analisadas, mostrando boa exatidão e sensibilidade do método proposto. Os valores obtidos para as amostras analisadas situaram-se entre 2,8 x 10ˉ6 ± 5,0 x 10ˉ⁸ mol Lˉ¹ e 3,4 x 10ˉ7 ± 5,0 x 10ˉ9 mol Lˉ¹ para Ca²⁺ nas amostras de biodiesel.

<p>Cilj ove doktorske disertacija&nbsp; bio je razvoj&nbsp; novih, osetljivih, selektivnih i ekonomski<br />isplativih&nbsp; voltametrijskih&nbsp; radnih&nbsp; elektroda&nbsp; za&nbsp; praćenje&nbsp; odabranih&nbsp; analita&nbsp; kako&nbsp; u<br />laboratorijskim tako i pri terenskim uslovima.&nbsp; Ispitivana je&nbsp; mogućnost primene&nbsp; ovih&nbsp; radnih&nbsp; elektroda&nbsp; primenom&nbsp; voltametrijskih&nbsp; metoda&nbsp; kako&nbsp; u&nbsp; model&nbsp; rastvorima&nbsp; tako&nbsp; i&nbsp; u&nbsp; pojedinim realnim sistemima. SW-ASV&nbsp; zasnovana&nbsp; na&nbsp; elektrodama&nbsp; od&nbsp; staklastog&nbsp; ugljenika&nbsp; povr&scaron;inski modifikovanim&nbsp; Bi-MWCNT&nbsp; i&nbsp; BiOCl-MWCNT&nbsp; je&nbsp; primenjena&nbsp; za&nbsp; određivanje&nbsp; jona&nbsp; Pb(II)&nbsp; i Cd(II)&nbsp; pri&nbsp; optimizovanim&nbsp; uslovima&nbsp; merenja.&nbsp; Određivanje&nbsp; ciljnih&nbsp; jona&nbsp; vr&scaron;eno&nbsp; je&nbsp; pri&nbsp; radnom potencijalu&nbsp; od&nbsp; -1,2&nbsp; V&nbsp; (izmeren&nbsp; u&nbsp; odnosu&nbsp; na&nbsp; zasićenu&nbsp; kalomelovu&nbsp; elektrodu)&nbsp; i&nbsp; vremenu<br />elektrodepozicije jona&nbsp; od 120 s. Sva merenja su izvr&scaron;ena u rastvoru acetatnog pufera čija je pH-vrednost iznosila&nbsp; 4,0. Primenjeni koncentracioni opseg ciljnih analita iznosio je&nbsp; od 5 do 50&nbsp; &mu;g&nbsp; dm ^-3 .&nbsp; Primenom&nbsp; ovog&nbsp; tipa&nbsp; elektrode&nbsp; dobijene&nbsp; su&nbsp; vrednosti&nbsp; granice&nbsp; detekcije&nbsp; za&nbsp; jone Pb(II) i Cd(II) 0,57&nbsp; &mu;g dm ^-3i 1,2 &mu;g dm^-3 , redom. Dobijena RSD iznosila je manje od 10% za oba&nbsp; jona.&nbsp; Ova&nbsp; metoda&nbsp; je&nbsp; primenjena&nbsp; i&nbsp; za&nbsp; određivanje&nbsp; ciljnih&nbsp; jona&nbsp; u&nbsp; realnom&nbsp; uzorku&nbsp; porne vode&nbsp; sedimenta&nbsp; a&nbsp; rezultati&nbsp; dobijeni&nbsp; optimizovanom&nbsp; voltametrijskom&nbsp; metodom&nbsp; su&nbsp; u&nbsp; dobroj saglasnosti sa rezultatima koji su dobijeni primenom komparativne GFAAS metode. Bizmut oksihlorid-vi&scaron;ezidne ugljenične nanocevi kompozitni materijal je primenjen za povr&scaron;insko&nbsp; modifikovanje&nbsp; elektrode&nbsp; od&nbsp; staklastog&nbsp; ugljenika&nbsp; za&nbsp; brzo&nbsp; i&nbsp; jednostavno voltametrijsko&nbsp; određivanje&nbsp; tragova&nbsp; Zn(II)-jona&nbsp; primenom&nbsp; SW-ASV&nbsp; metode.&nbsp; BiOClMWCNT/GCE je pokazala linearan analitički odgovor u&nbsp; osegu koncentracija od&nbsp; 2,50 do&nbsp; 80,0 &mu;g&nbsp; dm ^-3sa dobijenom vredno&scaron;ću GD 0,75 &mu;g&nbsp; dm^-3pri akumulacionom vremenu od&nbsp; 120 s&nbsp; i potencijalu&nbsp; elektrodepozicije&nbsp; -1,40&nbsp; V&nbsp; u&nbsp; odnosu&nbsp; na&nbsp; ZKE.&nbsp; Merenja&nbsp; su&nbsp; vr&scaron;ena&nbsp; u&nbsp; acetatnom puferu pH 4,5. Dobijena RSD iznosila je 4,8 %. Upoređene su performanse novodizajnirane BiOCl-MWCNT/GCE elektrode&nbsp; i&nbsp; tradicionalne elektrode na bazi bizmut filma (BiF/GCE), MWCNT/GCE,&nbsp; BiF-MWCNT/GCE&nbsp; i&nbsp; nemodifikovane&nbsp; GC&nbsp; elektrode.&nbsp; Novodizajnirana elektroda je primenjena za&nbsp; detekciju&nbsp; i određivanje&nbsp; Zn(II)-jona&nbsp; u realnim&nbsp; uzorcima kao &scaron;to su<br />dijetetski&nbsp; suplement&nbsp; i&nbsp; pekarski&nbsp; kvasac.&nbsp; Dobijeni&nbsp; rezultati&nbsp; su&nbsp; uporedivi&nbsp; sa&nbsp; deklarisanom vredno&scaron;ću&nbsp; u&nbsp; slučaju&nbsp; dijetetskog&nbsp; suplementa&nbsp; a&nbsp; u&nbsp; slučaju&nbsp; pekarskog&nbsp; kvasca&nbsp; sa&nbsp; rezultatima dobijenih komparativnom FAAS .<br />Elektroda od ugljenične paste je povr&scaron;inski modifikovana pripremljenim kompozitom<br />koji je&nbsp; izgrađen od vi&scaron;ezidnih ugljeničnih nanocevi i čestica&nbsp; Sb₂O_3.&nbsp; Kompozitni&nbsp; materijal&nbsp; je okarakterisan&nbsp; primenom&nbsp; TEM,&nbsp; EDS&nbsp; i&nbsp; XRD&nbsp; mernih&nbsp; tehnika.&nbsp; Sb₂O₃-MWCNT/CPE&nbsp; je okarakterisana primenom ciklične voltametrije a merenja su vr&scaron;ena u rastvoru hlorovodonične kiseline&nbsp; (pH&nbsp; 2,0).&nbsp; Primenom&nbsp; SW-ASV&nbsp; metode&nbsp; ova&nbsp; radna&nbsp; elektroda&nbsp; je&nbsp; upotrebljena&nbsp; za određivanje&nbsp; jona Pb(II) i Cd(II)&nbsp; u&nbsp; koncentracionom opsegu 2,0-40,0&nbsp; &mu;g&nbsp; dm&nbsp; ^-3za&nbsp; Pb(II)-jon&nbsp; i 2,0-40,0&nbsp; &mu;g&nbsp; dm ^-3 za&nbsp; Cd(II)-jon&nbsp; pri&nbsp; čemu&nbsp; su&nbsp; dobijene&nbsp; dobre&nbsp; linearne&nbsp; zavisnosti&nbsp; za&nbsp; oba&nbsp; ciljna jona.&nbsp; Optimalna&nbsp; procedura&nbsp; uključuje&nbsp; primenu&nbsp; Sb2O3-MWCNT/CPE&nbsp; u&nbsp; 0,01&nbsp; mol dm ^-3<br />hlorovodoničnoj kiselini uz vreme elektrodepozicije jona iz rastvora od 120&nbsp; s&nbsp; na&nbsp; potencijaluod&nbsp; -1,2&nbsp; V,&nbsp; pri&nbsp; čemu&nbsp; su&nbsp; dobijene&nbsp; vrednosti&nbsp; za&nbsp; GD&nbsp; 1,1&nbsp; &mu;g&nbsp; dm ^-3 Cd(II)&nbsp; i&nbsp; 1,6&nbsp; &mu;g&nbsp; dm ^-3 Pb(II). Optimizovana&nbsp; metoda&nbsp; zasnovana&nbsp; na&nbsp; ovom&nbsp; tipu&nbsp; voltametrijskog&nbsp; senzora&nbsp; je&nbsp; uspe&scaron;no primenjena&nbsp; za&nbsp; određivanje&nbsp; jona&nbsp; Cd(II)&nbsp; u&nbsp; obogaćenom&nbsp; uzorku&nbsp; česmenske&nbsp; vode,&nbsp; gde&nbsp; su&nbsp; se dobijene vrednosti u&nbsp; saglasnosti sa očekivanom. Elektroda od ugljenične paste povr&scaron;inski je&nbsp; modifikovana primenom&nbsp; Sb₂O₃-MWCNT nanokompozitnog&nbsp; materijala&nbsp; i&nbsp; primenjena&nbsp; za&nbsp; direktno&nbsp; voltametrijsko&nbsp; određivanje imidakloprida&nbsp; u&nbsp; model&nbsp; rastvorima.&nbsp; U&nbsp; cilju&nbsp; postizanja&nbsp; &scaron;to&nbsp; boljih&nbsp; analitičkih&nbsp; performansi optimizovani su eksperimentalni uslovi merenja kao &scaron;to su pH-vrednost rastvora pomoćnog elektrolita&nbsp; i&nbsp; kondicioniranje&nbsp; povr&scaron;ine&nbsp; voltametrijskog&nbsp; senzora.&nbsp; Kao&nbsp; optimalna&nbsp; pH-vrednost pomoćnog elektolita (Britton-Robinsonovog pufera) odabrana je pH 7,0, a ponavljanje ciklusa cikliranja najmanje 4 puta povoljno utiče na stabilnost&nbsp; voltametrijskih signala. Optimizovana metoda primenjena je za SW direktno katodno određivanje imidakloprida u koncentracionom intervalu od 1,41 do 32,77 &mu;g cm ^-3 uz dobijeni korelacioni faktor od 0,9995. Na osnovu dobijenih rezultata može se zaključiti da su razvijene analitičke metode pre svega&nbsp; osetljive,&nbsp; selektivne,&nbsp; reproduktivne&nbsp; i&nbsp;&nbsp; jednostavne&nbsp; &scaron;to&nbsp; omogućava&nbsp; njihovu&nbsp; primenu&nbsp; za veliki broj uzoraka.&nbsp; Merenjima u model i realnim rastvorima dokazana je mogućnost njihove primene&nbsp; u&nbsp;&nbsp; komplikovanim&nbsp; matriksima,&nbsp; pri&nbsp; različitim&nbsp; pH&nbsp; vredostima&nbsp; pri&nbsp; čemu&nbsp; su&nbsp; dobijeni<br />rezultati koji su u saglasnosti sa rezultatima primenjenih komparativnih metoda. Naravno, za dobijanje&nbsp; reprezentativnih&nbsp; rezultata&nbsp; neohodno&nbsp; je&nbsp; izvr&scaron;iti&nbsp; optimizaciju&nbsp; uslova&nbsp; merenja&nbsp; &scaron;to podrazumeva sam odabir supstrat-elektrode, odabir povr&scaron;inskog modifikatora i optimizaciju eksperimentalnih uslova merenja.</p> / <p>The&nbsp; aim of this&nbsp; Ph.D. thesis&nbsp; was the development of new, sensitive, selective and economically&nbsp; viable&nbsp; voltametric&nbsp; working&nbsp; electrode&nbsp; for&nbsp; continuous&nbsp; monitoring&nbsp; of&nbsp; different target&nbsp; analytes.&nbsp; The&nbsp; use&nbsp; of&nbsp; these&nbsp; advantaged&nbsp; working&nbsp; electrodes&nbsp; was&nbsp; investigated&nbsp; using voltametric methods both in model solutions and in certain real systems.SW-ASV&nbsp; based on glassy carbon&nbsp; electrode surface modified with&nbsp; Bi- MWCNT and BiOCl-MWCNT&nbsp; were&nbsp; applied&nbsp; for&nbsp; determination&nbsp; of&nbsp; Pb(II)&nbsp; and&nbsp; Cd(II)&nbsp; ions.&nbsp; Voltametric determination&nbsp; of&nbsp; Pb(II)&nbsp; and&nbsp; Cd(II)&nbsp; ions&nbsp; was&nbsp; performed&nbsp; at&nbsp; working&nbsp; potential&nbsp; of&nbsp; -1.2&nbsp; V (measured against the saturated calomel electrode) and time of electrodeposition of 120 s. All measurements were performed in acetate buffer solution pH 4.0. Concentration range of targetanalites were&nbsp; 5-50 &mu;g&nbsp; dm -3 . Using this type of electrode,&nbsp; obtained&nbsp; detection limits for&nbsp; Pb(II) and Cd(II) ions&nbsp; were&nbsp; 0.57&nbsp; &mu;g&nbsp; dm -3 and 1.2&nbsp; &mu;g&nbsp; dm -3 , respectively, with RSD lower than 10%.This&nbsp; method&nbsp; was&nbsp; applied&nbsp; for&nbsp; target&nbsp; ions&nbsp; determination&nbsp; in&nbsp; sediment&nbsp; pore&nbsp; water&nbsp; sample,&nbsp; and obtained results are comparable with those who are obtained using GFAAS method. Bismuth oxychloride-multiwalled carbon nanotubes composite material was applied for&nbsp; surface&nbsp; modification&nbsp; of&nbsp; the&nbsp; glass-carbon&nbsp; electrode&nbsp; for&nbsp; quick&nbsp; and&nbsp; simple&nbsp; voltametric determination&nbsp; of&nbsp; Zn(II)&nbsp; ions&nbsp; using&nbsp; the&nbsp; SW-ASV&nbsp; method.&nbsp; BiOCl-MWCNT/GCE&nbsp; showed&nbsp; a linear&nbsp; analytical&nbsp; response&nbsp; in&nbsp; a&nbsp;&nbsp; concentration&nbsp; from&nbsp; 2.50&nbsp; to&nbsp; 80.0&nbsp; &mu;g&nbsp; dm -3 with&nbsp; a&nbsp; value&nbsp; of detection limit 0.75 &mu;g dm -3 at a acumulation time of 120 s and an electrodeposition potential of&nbsp; -1.40 V vs. saturated&nbsp; calomel electrode.&nbsp; Measurements were carried out in acetate buffer pH 4.5. The obtained&nbsp; value of the RSD&nbsp; was&nbsp; 4.8%. The performance of the newly designed BiOCl-MWCNT/GCE&nbsp; electrode,&nbsp; traditional&nbsp; bismuth-based&nbsp; electrode&nbsp; (BiF/GCE), MWCNT/GCE,&nbsp; BiF-MWCNT/GCE&nbsp; and&nbsp; unmodified&nbsp; GC&nbsp; electrodes&nbsp; were&nbsp; compared.&nbsp; The applied electrode shows very good electroanalytic properties when determining this target ion. Obtained results are in good agreement with declared value in case of dietetic suplement, and in the brewer&rsquo;s yeast sample results were comparable with FAAS results. Carbon&nbsp; paste&nbsp; electrode&nbsp; surface&nbsp; modified&nbsp; with&nbsp; new&nbsp; composite&nbsp; material&nbsp; based&nbsp; on multiwalled carbon nanotubes and&nbsp; Sb2O3&nbsp; particles. The composite is characterized by TEM, EDS and&nbsp; XRD measurment. Sb2O3- MWCNT/CPE was characterized by cyclic voltammetry and measurements were carried out in a&nbsp; hydrochloric acid&nbsp; solution&nbsp; (pH 2.0). Using the SWASV&nbsp; method,&nbsp; this&nbsp; working&nbsp; electrode&nbsp; was&nbsp; used&nbsp; to&nbsp; determine&nbsp; Pb(II),&nbsp; Cd(II)&nbsp; ions&nbsp; in&nbsp; the concentration range&nbsp; from&nbsp; 2.0&nbsp; to 40.0&nbsp; &mu;g dm -3 for Pb(II) and 2.0-40.0&nbsp; &mu;g dm -3 for Cd(II) ions. Newly&nbsp; designed&nbsp; sensor&nbsp; showed&nbsp; good&nbsp; linear&nbsp; dependences&nbsp; for&nbsp; both&nbsp; target&nbsp; ions.&nbsp; The&nbsp; most optimal&nbsp; procedure&nbsp; involving&nbsp; application&nbsp; of&nbsp; Sb2O3-MWCNT/CPE&nbsp; in&nbsp;&nbsp; .01&nbsp; mol&nbsp; dm -3 hydrochloric&nbsp; acid,&nbsp; with&nbsp; electroposition&nbsp; time&nbsp; of&nbsp; target&nbsp; ions&nbsp; 120&nbsp; s&nbsp; at&nbsp; a&nbsp; electrodeposition potential&nbsp; of&nbsp; -1.2&nbsp; V.&nbsp; Obtained&nbsp;&nbsp; values&nbsp; of&nbsp;&nbsp;&nbsp; LOD&nbsp; 1,1&nbsp; &mu;g&nbsp; dm -3 for&nbsp; Cd(II)&nbsp; and&nbsp; for&nbsp; 1,6&nbsp; &mu;g&nbsp; dm -3 Pb(II)&nbsp; ions.&nbsp; An&nbsp; optimized&nbsp; method&nbsp; based&nbsp; on&nbsp; this&nbsp; type&nbsp; of&nbsp; voltametric&nbsp; sensor&nbsp; has&nbsp; been successfully&nbsp; applied&nbsp; for&nbsp; determination&nbsp; of&nbsp; Cd(II)&nbsp; ion&nbsp; in&nbsp; a&nbsp; spiked&nbsp; tap&nbsp; water&nbsp; sample.&nbsp; Results obtained during this measurment were in tune with expected results. CPE&nbsp; was&nbsp; surface&nbsp; modified&nbsp; using&nbsp; Sb2O3-MWCNT&nbsp; nanocomposite&nbsp; material&nbsp; and tested&nbsp; for&nbsp; direct&nbsp; voltametric&nbsp; determination&nbsp; of&nbsp; imidacloprid&nbsp; in&nbsp; model&nbsp; solutions.&nbsp; In&nbsp; order&nbsp; to achieve the best analytical performance, experimental conditions of measurement such as the pH value of the supporting electrolyte and conditioning of the voltametric sensor surface havebeen&nbsp; optimized.&nbsp; As&nbsp; an&nbsp; optimum&nbsp; pH&nbsp; value&nbsp; of&nbsp; the&nbsp; supporting&nbsp; electrolyte&nbsp; (Britton-Robinson buffer), a pH 7.0 was selected, and the repeating cycles of the cycling process at least 4 times favorably&nbsp; influenced&nbsp; the&nbsp; stability&nbsp; of&nbsp; the&nbsp; voltametric&nbsp; signals.&nbsp; The&nbsp; optimized&nbsp; method&nbsp; was applied for the SW direct cathodic determination&nbsp; of&nbsp; imidacloprid in the concentration range from 1.41 to 32.77 &mu;g cm -3&nbsp; with obtained correlation factor of 0.9995. Based on results it can be concluded that developed analytical methods are sensitive, selective, reproducibile and simple, which can enable their application for various number of samples. Measurements in the model and real solutions have demonstrated the possibility of their&nbsp; application&nbsp; in&nbsp; complicated&nbsp; matrices,&nbsp; at&nbsp; different&nbsp; pH,&nbsp; whereby&nbsp; obtained&nbsp; results&nbsp; are&nbsp; in accordance&nbsp; with&nbsp; the&nbsp; results&nbsp; of&nbsp; the&nbsp; applied&nbsp; comparative&nbsp; methods.&nbsp; For&nbsp; obtainig&nbsp; of representative&nbsp; results&nbsp; it&nbsp; is&nbsp; necessary&nbsp; to&nbsp; optimize&nbsp; conditions&nbsp; of&nbsp; measurment&nbsp; which&nbsp; include: selection of substrat electrode, surface modifier and optimization of experimental condition.</p>