Call number: LD2668 .T4 1978 W91 / Master of Science

An experimental study of the drying of sand using an induction heated double-screw conveyor (screw shaft radius 0.0381 m, blade radius 0.0883 m, thread pitch 0.0869 m, heated length 1.96 m) is presented. The main aim was to improve the understanding of the operating characteristics of the dryer and obtain data for testing and refining future mathematical models. In the drying tests, power to the induction coils was controlled to obtain uniform screw shaft temperatures between 150 to 250°C. The angular rotation speed of the screws ranged between 2.5 to 15 rpm; and inlet moisture content (mass fraction of water) was varied between 0.1 to 10 %. The sand used had a mean effective diameter of 0.38 mm, particle density of 2743.7 kg/m3, and uncompacted dry bulk density of 1508.2 kg/m3. The results of sand characterization tests, conveying tests without induction heating, and drying tests are presented and discussed.

No description available.

<p>Kvalitetno me&scaron;anje pra&scaron;kastih materijala, čestica ili granula je od izuzetnog inženjerskog, energetskog, ekonomskog i ekolo&scaron;kog značaja u raznim granama industrije: prehrambenoj, procesnoj, hemijskoj, farmaceutskoj industriji. Efikasnost me&scaron;anja, dizajn opreme i parametri procesa me&scaron;anja imaju značajan uticaj na kvalitet i cenu poluproizvoda ili finalnog proizvoda.<br />U ovoj tezi, prikazana je upotreba metode diskretnih elemenata (DEM) na modelovanje me&scaron;anja granula i/ili pra&scaron;kastih materijala (granulisani zeolit ili kukuruzna prekrupa) u različitim konfiguracijama statičkih me&scaron;ača Komax i Ross, kao i za modifikovane pužne transportere / predme&scaron;alice. Primenjen je i metod računske dinamike fluida (CFD) za modelovanje protoka fluida u Ojlerovom vi&scaron;efaznom modelu, za predviđanje pona&scaron;anja čestica unutar različitih konfiguracija statičkih me&scaron;alica.<br />Ispitivano je petnaest horizontalnih pužnih transportera sa nepromenljivog koraka, sa modifikovanom geometrijom, različitih dužina pužnice, sa dodatnim elementima na pužnoj spirali, radi istraživanja mogućnosti me&scaron;anja granulisanog materijala, tokom transporta materijala (granulisani zeolit).<br />Rezultati matematičkog modeliranja i numeričke simulacije su upoređeni sa odgovarajućim eksperimentalnim rezultatima na osnovu stepena pome&scaron;anosti me&scaron;avine, primenom kriterijuma relativne standardne devijacije (RSD). Zahvaljujući ovde postavljenim modelima moguće je uraditi optimizaciju geometrije i parametara sistema me&scaron;anja uzimajući u obzir kvalitet procesa me&scaron;anja i cenu finalnog proizvoda.</p> / <p>The quality mixing of powders, particles and/or granules obtain an engineering, energetic, economic and ecological importance of various technologies, food industry, pharmaceutical and chemical industry. The mixing efficiency, the design of equipment and mixing parameters exert a strong impact on quality and the price of intermediate or final product. In this thesis, the use of Discrete Element Method (DEM) is shown for modeling of granular and/or powder flow in various multiple Komax and Ross mixing applications, as well as for the modified screw conveyors premixers . Computational Fluid Dynamic (CFD) method was used for modeling of fluid flow through Eulerian multiphase model, for the prediction of particle displacement within the various static mixers configurations. Fifteen horizontal screw conveyors with invariant pitch, with modified geometry and different screw length , with some additional elements welded on the helix were tested for the possibility of granular material mixing during the material transport (granulated zeolite).<br />The results of the numerical simulation are compared with appropriate experimental results, according to relative standard deviation criterion (RSD). Application of this model provide the optimization of the geometry and parameters of mixing systems taking into account the quality of the mixing process and the cost of the final product.</p>

La R.D. Congo possède l’un de taux de desserte en électricité le plus faible au monde (moins de 1 % en zones rurales) malgré son important potentiel hydroélectrique estimé à 100.000 MW. Pour accroitre le taux de desserte en électricité en construisant des microcentrales hydroélectrique, il est impérieux d’utiliser une technologie simple, fiable, robuste et peu coûteuse. La turbine à vis d’Archimède apparait comme une solution appropriée à ces exigences. Nous avons ainsi conçu et fabriqué localement (à Lubumbashi) un banc d’essai d’une turbine à vis d’Archimède possédant seulement deux hélices et des pas larges (β = 30° et β = 45°). L’objectif étant de simplifier la fabrication et réduire la quantité d’acier utilisé pour la vis par rapport aux vis utilisées en Europe et aux U.S.A. Le banc d’essais nous a permis d’obtenir six configurations combinant la pente de la vis (α = 22,5°, 30° et 37,5°) et les pas. La combinaison la plus optimale est la configuration de la vis inclinée de α = 22,5° par rapport à l’horizontale et dont l’hélice est orientée de β = 45° sur le moyeu (p45H22).<p>En second lieu, vient la configuration de la vis inclinée de α = 30° et dont l’hélice est orientée de β = 45° sur le moyeu (p45H30). Ces deux configurations ont respectivement un rendement à débit nominal de 89 et 86 %./D.R. Congo has an electricity service rate that ranks as the lowest in the world (less than 1% in rural areas) despite its large hydroelectric potential estimated at 100,000 MW. To increase the rate of access to electricity by constructing small hydropower plant, it is imperative to use simple technology, reliable, robust and inexpensive. The Archimedean screw turbine appears to be an appropriate solution to these requirements. We have designed and manufactured locally (in Lubumbashi) a test bench for Archimedean’s screw turbines having two blades only and a large pitch p function of β ( β = 30 ° and β = 45 °, β being the orientation angle of the blade on the screw cylinder). The goal is to simplify manufacturing and reduce the amount of steel used for the screw relative to the screws used in Europe or in USA. The test bench has allowed the experiments with six configurations combining the slope of the screw (α = 22.5 °, 30 ° and 37.5 °) and the pitch p (with varying rotation speed). The optimal combination appeared to be the configuration of the screw inclined at α = 22.5 ° relative to the horizon and with an helix β = 45 ° on the cylinder of the screw. The second best configuration has an inclined screw α = 30 ° and the helix which is oriented β = 45 °. These two configurations each have a global efficiency of 89% and 86%, respectively. <p> / Doctorat en Sciences de l'ingénieur / info:eu-repo/semantics/nonPublished