Segmented copolymers are important polymers with attractive properties and wide applications. In this dissertation, segmented polyurethanes containing triptycene units and multiblock copolymers containing poly(arylene ether sulfone) (PAES) and poly(1,4-cyclohexyldimethylene terephthalate) (PCT) segments were synthesized and systematically studied. Investigation of the influence of the bulky triptycene structure on the morphologies and properties of segmented polyurethanes was carried out by using triptycene-1,4-hydroquinone bis(2-hydroxyethyl)ether (TD) as the chain extender. Segmented polyurethanes based on poly(tetramethylene glycol) (PTMG) of 1000 g/mol were synthesized using a two-step polymerization procedure. Hydroquinone bis(2-hydroxyethyl)ether (HQEE) was used for the purpose of comparison. Hard segments with different bulkiness and flexibility were prepared with hexamethylene diisocyanate (HDI) and 4,4'-methylenebis(phenyl isocyanate) (MDI), and HQEE or TD as chain extenders. The incorporation of bulky TD and less flexible MDI significantly inhibited hydrogen bonding based on the Fourier transform infrared (FTIR) results. In addition, the microphase separation was also disturbed by the bulky and less flexible hard segments with confirmation from tapping mode atomic force microscopy (AFM) and small angle X-ray scattering (SAXS). The flexible HDI can be used to overcome the bulkiness of triptycene, promote microphase separation, and enhance mechanical properties. Novel PTMG based soft segments containing triptycene units were also prepared with number average molecular weight (Mn) around 2500 g/mol. Then this soft segment was reacted with MDI and HQEE to prepare segmented polyurethanes. Soft segments such as hydroquinone (HQ) containing PTMG (Mn = 2100 g/mol), and pure PTMGs (Mn = 1000 and 2000 g/mol) were used for comparison. Differential scanning calorimetry (DSC) and dynamic mechanical analysis (DMA) results demonstrated that triptycene units led to an increased glass transition temperature (Tg) and an elimination of the crystallization of the soft segments. The absence of strain hardening for the triptycene-containing sample suggested a suppressed strain induced crystallization of soft segments, which was also confirmed by the analysis of wide-angle X-ray diffraction (WAXD) on the films strained to 370 %. Crystallizable PCT segments were copolymerized with PAESs to enhance solvent resistance and mechanical properties. PAES oligomers (Mn = 2000 g/mol) were first synthesized, and then reacted with dimethyl terephthalate (DMT) and 1,4-cyclohexanedimethanol (CHDM). Weight percentages of PCT segments were gradually changed from 20 wt% to 80 wt%. With PCT content greater than 50 wt%, crystallinity was observed by DSC, DMA, and WAXD. The extent of crystallinity of the copolymers was dependent on the wt% of PCT. Furthermore, crystallization behavior of copolymers based on two CHDMs with different isomer ratios (cis/trans 30/70 and all trans) were studied. Due to their more symmetric structure, copolymers based on all trans CHDM exhibited a higher extent of crystallization. / Ph. D.

Orientador: Maria Isabel Felisberti / Tese (doutorado) - Universidade Estadual de Campinas, Instituto de Química / Made available in DSpace on 2018-08-26T18:00:04Z (GMT). No. of bitstreams: 1 Trinca_RafaelBergamo_D.pdf: 7109183 bytes, checksum: 36f8cbad69a4e17b2adb60ccbc082e94 (MD5) Previous issue date: 2015 / Resumo: Este trabalho teve como objetivo a síntese e a caracterização de poliuretanas segmentadas (SPUs), baseadas em macrodióis de baixa massa molar (2 kDa) ¿ poli(etileno glicol), poli(L-lactídeo) e poli(carbonato de trimetileno) (PEG, PLLA e PTMC, respecti- vamente) ¿ e diferentes diisocianatos (2,4-diisocianato-tolueno e 1,6-diisocianato-hexano, 2,4-TDI e HDI, respectivamente) e extensores de cadeia (1,4-butanodiol e ácido-2,2-bis(hidroximetil)-propanóico BDO e DMPA, respectivamente). Os macrodióis PLLA e PTMC foram sintetizados por polimerização por abertura de anel (ROP). As SPUs foram obtidas por uma rota de duas etapas: pré-polimerização dos macrodióis com diisocianatos e extensão de cadeia. Estudou-se os efeitos da razão mássica entre os macrodióis sobre as propriedades físico-químicas e morfológicas de SPUs mono, bi e tricomponentes baseadas em 2,4-TDI e BDO. Análises de ¹H NMR e GPC revelaram diferenças na reatividade dos macrodióis, que resultaram em diferenças de composição das SPUs em relação ao meio reacional e na distribuição de massa molar. Análises por DSC, DMTA, AFM e ensaios de intumescimento revelaram que as propriedades intrínsecas dos precursores foram combinadas e moduladas nas SPUs. A combinação dos três macrodióis resultou em SPUs com propriedades únicas, não encontradas nas SPUs binárias e monocomponentes. Os efeitos da natureza de diisocianatos e extensores de cadeia sobre as propriedades de SPUs ternárias também foram estudados. As SPUs baseadas em diisocianatos simétricos (HDI) apresentam temperatura de transição vítrea inferior aos baseados em 2,4-TDI, além disso, essas SPUs são semicristalinas, enquanto as baseadas em 2,4-TDI são essencialmente amorfas. A morfologia das SPUs, tipicamente de fase dispersa em uma matriz, é afetada pela proporção entre os macrodióis e pela natureza dos diisocianatos e dos extensores de cadeia. A capacidade das SPUs em intumescer em água é governada pelo teor de PEG e varia com a temperatura (SPUs termo-responsivas) enquanto as SPUs baseadas em DMPA apresentaram intumescimento dependente do pH do meio (SPUs responsivas ao pH). SPUs com menor teor de PEG e ricas em PLLA foram processadas pela técnica de eletrofiação, resultando em filmes nano fibrosos e porosos com propriedades elastoméricas / Abstract: This study aimed at the synthesis and characterization of segmented polyurethanes (SPUs), based on low molecular weight (2 kDa) macrodiols ¿ poly(ethylene glycol), poly(L-lactide) and poly(trimethylene carbonate) (PEG, PLLA and PTMC, respectively) - and different diisocyanates (2,4-diisocyanato-toluene and 1,6-diisocyanato-hexane, 2,4-TDI and HDI, respectively) and chain extenders (1,4-butanediol and 2,2-bis-hydroxymethyl-propanoic acid, DMPA and BDO respectively). The PLLA and PTMC macrodiols were synthesized by ring-opening polymerization (ROP). The SPUs were obtained by a two-step route: synthesis of prepolymers from diisocyanates and macrodiols, followed by a chain extension step. The effects of the weight ratio of macrodiols on the physico-chemical and morphological properties of SPUs based on 2,4-TDI and BDO were studied. The ¹H NMR and GPC analysis revealed differences in reactivity of macrodióis, which resulted in differences in composition of the SPUs in relation to the reaction medium and in the molar mass distribution. Analysis by DSC, DMTA, AFM and swelling assays revealed that the intrinsic properties of the precursors were combined and modulated in SPUs. The combination of the three macrodiols results in SPUs with unique properties not found in binary and single component SPUs. The effects of the nature of the chain extenders and diisocyanates on the properties of ternary SPUs were also studied. The SPUs based on symmetrical diisocyanates (HDI) presents lower glass transition temperatures than those based on 2,4-TDI. Moreover, they are semi crystalline while SPUs based on 2,4-TDI are essentially amorphous. The morphology of the SPUs, typically of a dispersed phase in a matrix, is affected by the macrodiols ratio and by the nature of diisocyanates and chain extenders. The water swelling capability of the SPUs is governed by the PEG content and varies with temperature (temperature responsive SPUs) as well as with pH (pH responsive SPUs) when BDO is replaced with DMPA. SPUs with low PEG content and rich in PLLA were processed by electrospinning technique, resulting in nanofibrous porous films with elastomeric properties / Doutorado / Físico-Química / Doutor em Ciências

<p>Strukturiranje elastomernih kompozita dodavanjem različitih vrsta nanopunila je dovelo do značajnog pobolj&scaron;anja njihovih primenskih svojstava, a samim tim i do povećanja njihove potencijalne primene kao pogodnih materijala za specijalne namene. U ovom radu, dobijene su dve grupe elastomernih hibridnih materijala za specijalne namene (na osnovu stirenbutadienskog elastomera i na osnovu termoplastičnih poliuretana).<br />U prvom delu istraživanja, veliki doprinos u razvoju industrije gume je postignut strukturiranju stirenbutadienskih nanokompozita primenom nanočestica punila silicijum(IV)oksida različitih morfolo&scaron;kih svojstava, dobijenih hidrotermičkom i termičkom obradom, primenom tri eksperimentalno modelovana punila silicijum(IV)oksida (dobijena taloženjem iz Na-vodenog stakla sa sumpornom kiselinom), kao i hibridnog punila (kombinacije čestica aktivne čađi i SiO₂ optimalnih svojstava). Izvr&scaron;ena je analiza uticaja strukture, povr&scaron;ine i povr&scaron;inske aktivnosti nanopunila na ojačanje elastomera, kao i provera koncepata, modela i teorija ojačanja na neumreženim i umreženim sistemima stirenbutadienskih elastomera ojačanih modifikovanim punilima SiO₂. Primenom mnogobrojnih metoda karakterizacije, sveobuhvatno je ispitan uticaj nanopunila na karakteristike me&scaron;anja, reolo&scaron;ka svojstva pripremljenih hibridnih nanokompozita, sposobnost umrežavanja u neumreženom materijalu, kao i na toplotna, dinamičko-mehanička i mehanička svojstva umreženih nanokompozita, radi projektovanja i optimizovanja sastava SBR hibridnih materijala za razvoj modelnog protektora sa optimalnim svojstvima za ekolo&scaron;ke ili &quot;zelene pneumatike&quot;. Drugi deo istraživanja je bio posvećen dobijanju segmentiranih poliuretanskih elastomernih nanokompozita primenom alifatičnih polikarbonatnih diola i nanočestica bentonita, koji nalaze primenu u medicini, građevinarstvu, u industriji name&scaron;taja i sportske opreme. Primenom mnogobrojnih metoda za karakterizaciju, ispitan je složen mehanizam uticaja tvrdih segmenata, termodinamičke nekompatibilnosti i prisustva nanočestica punila bentonita na strukturu i morfologiju, kao i na toplotna i dinamičko-mehanička svojstva pripremljenih poliuretanskih termoplastičnih elastomera. Dobijeni podaci o obrazovanju vodoničnih veza, termičkoj stabilnosti i termičkoj dekompoziciji, kao i o temperaturama prelaska u staklasto stanje i oblasti raskidanja čvorova fizičkih veza, predstavljaju značajan doprinos napretku strukturiranja poliuretanskih elastomera i nanokompozita na osnovu alifatičnih polikarbonatnih diola, i omogućavaju primenu ovih materijala za specijalne namene.</p> / <p>The structuring of elastomeric composites by addition of different nanofillers has led to a significant improvement of their end-use properties, and therefore, to their potential application as suitable materials for special applications. In this work, two types of elastomeric hybrid materials for special purposes were obtained (based on styrene-bustadiene elastomer or on segmented thermoplastic polyurethanes).<br />In the first part of the study, a major contribution to the development of the rubber industry was achieved by structuring styrene-butadiene nanocomposites, applying silica nanoparticles of various morphological properties: prepared by hydrothermal or thermal treatment, three experimentally prepared SiO2 fillers (obtained by precipitation from sodium silicate with sulfuric acid), as well as a hybrid filler (combination of carbon black and SiO2 fillers with optimal properties). The analysis of the influence of the nanoparticles structure, surface and surface activity on the reinforcment of SBR elastomers, as well as the verification of concepts, models and reinforcement theories on non-cross-linked and cross-linked systems of styrene-butadiene nanocomposites was performed. Using the numerous characterization methods, the influence of nanofillers on the mixing characteristics, the rheological properties of the prepared hybrid nanocomposites, as well as the thermal, dynamic-mechanical and mechanical properties of cross-linked SBR nanocomposites was studied, in order to design and optimize the composition of SBR hybrid materials for development of environmental friendly or &quot;green&quot; tyre protector model.<br />The second part of the research was devoted to the preparation of segmented polyurethane elastomeric nanocomposites using aliphatic polycarbonate diols and bentonite nanoparticles, that have found the significant application in the medicine, construction, the furniture and sports equipment industry. Applying numerous characterization methods, a complex mechanism of the influence of the hard segments, thermodynamic incompatibility and the presence of bentonite filler on the structure and morphology, as well as on the thermal and dynamic-mechanical properties of the synthesized thermoplastic elastomers was studied. The obtained data on the hydrogen bonds formation, thermal stability and thermal decomposition, as well as the glass transition temperature and physical crosslink disruption temparature range, makes a significant contribution to the progress in structuring of polycarbonate-based polyurethane elastomers and their hybrid materials, and improves their potential applications for the special purposes.</p>

<p>U ovom radu, sintetisani su poli(uretan-izocijanuratni) elastomeri sa kovalentnim<br />čvorovima, katalitičkom ciklotrimerizacijom teleheličnih diizocijanata kao prekursora mreže<br />na osnovu 2,4-toluen-diizocijanata, &alpha;,&omega;-dihidroksipoli(oksipropilen)diola i monoola<br />dietilenglikolmonometiletra. Dobijeni su i termoplastični segmentirani poliuretani, sa<br />čvorovima fizičkog umreženja, jednostepenim postupkom i metodom prepolimerizacije,<br />reakcijom dve vrste alifatskog polikarbonatnog diola, koji se razlikuju u strukturi lanca,<br />heksametilen-diizocijanata i produživača lanca (1,4-butandiola). Sintetisana je i serija<br />poliuretanskih hibridnih materijala, dodatkom 1% <em>m/m</em> nanočestica organski modifikovanih<br />glina (montmorilonita i bentonita). Prioritet rada je bio da se utvrdi uticaj udela elastično<br />aktivnih i visećih lanaca na dinamičko-mehanička svojstva, toplotnu stabilnost i svojstva<br />prigu&scaron;enja poliuretanskih mreža sa izocijanurat (heksahidro-1,3,5-triazin-2,4,6-trion)<br />prstenovima, kao čvorovima. Takođe, cilj istraživanja je bio da se ispita uticaj odnosa<br />reaktivnih grupa diizocijanata, polikarbonatne komponente i produživača lanca, kao i dodatka nanočestica na svojstva povr&scaron;ine, morfologiju, dinamičko-mehanička i toplotna svojstva segmentiranih neojačanih i ojačanih elastomera. Toplotna degradacija poli(uretanizocijanuratnih) mreža i segmentiranih termoplastičnih poliuretana praćena je neizotermskim ispitivanjima, koristeći istovremenu termogravimetrijsku i masenu analizu (TG-MS), kao i istovremenu termogravimetriju i diferencijalno skenirajuću kalorimetriju (TG-DSC). Viskoelastična svojstva i svojstva prigu&scaron;enja dobijenih poliuretanskih elastomera su ispitivana pomoću dinamičko-mehaničke analize (DMA). Toplotno pona&scaron;anje segmentiranih poliuretana i nanokompozita, dobijenih jednostepenim postupkom sinteze, je proučavano modulovanom diferencijalno skenirajućom kalorimetrijom (MDSC). Temperatura prelaska u staklasto stanje i termoplastična svojstva neojačanih i ojačanih poliuretanskih materijala, dobijenih postupkom prepolimerizacije, određeni su primenom diferencijalno skenirajuće kalorimetrije (DSC). Hemijska struktura i formiranje vodoničnih veza dobijenih elastomera proučavane su koristeći Furijeovu transmisionu infracrvenu spektroskopiju (FTIR). Uticaj udela tvrdih segmenata na morfologiju i svojstva povr&scaron;ine segmentiranih poliuretana, ispitivan je pomoću mikroskopije atomskih sila (AFM). Stepen kristalnosti uzoraka i dispergovanje nanočestica u dobijenim hibridnim materijalima su odre&ntilde;eni primenom metode rasipanja X-zraka pod &scaron;irokim uglom (WAXS).</p> / <p> In this work, poly(urethane-isocyanurate) elastomers, with covalent junction points,<br /> were synthesized by catalytic cyclotrimerization of telechelic diisocyanates as network<br /> presursors based on 2.4-tolylenediisocyanate, a,w,dihydroxypoly(oxypropylene) and monool<br /> component 2-(2-metoxyetoxy)ethanol. Thermoplastic polyurethanes, with physical<br /> crosslinking, were obtained by one-step technique and pre-polimerization method, using two<br /> aliphatic polycarbonate diols (differening in chain constitution), hexamethylene-diisocyanate<br /> and chain extender (1,4-butane diol) as reactive components. One serie of polyurethane<br /> hybrid materials was prepared by addition of 1 wt. % of organically modified clay<br /> nanoparticles (bentonite and montmorillonite). The goal of this work was to investigate the<br /> influence of elastically active and dangling chains content on thermal stability, dynamic<br /> mechanical and damping properties of polyurethane networks with heat-resistant<br /> isocyanurate-(hexahydro-1,3,5-triazin-2,4,6-trion) rings, as crosslinks. The aim was also to<br /> determine the influence of diisocyanate, macrodiol and chain extender reactive groups&rsquo; ratio<br /> and nanoparticles addition on surface properties, morphology, dynamic mechanical and<br /> thermal properties of obtained segmented unfilled and filled elastomers. Thermal degradation<br /> of poly(urethane-isocyanurate) networks and segmented thermoplastic polycarbonate-based<br /> polyurethanes was investigated by nonisothermal analysis, using thermogravimetry coupled<br /> with mass spectroscopy analysis (TG-MS) and thermogravimetry coupled with differential<br /> scanning calorimetry (TG-DSC). Viscoelastic and damping properties of obtained<br /> polyurethane elastomers were estimated by dynamic mechanical measurements (DMA).<br /> Modulated differential calorimetry (MDSC) was used to investigate thermal behavior of<br /> segmented polyurethanes and nanocomposites, synthesized using one-step technique. The<br /> glass transition temperature and thermoplastic properties of unfilled and filled polyurethane<br /> materials, prepared by pre-polimerization procedure were assessed by differential scanning<br /> calorimetry (DSC). Fourier transform infrared spectroscopy (FTIR) was used to investigate<br /> the hydrogen bond formation and chemical structure of prepared segmented elastomers. The<br /> investigation of the influence of hard segment content on morphology and surface topography<br /> of prepared segmented elastomers sheets was done by atomic force microscope (AFM). In<br /> order to determine the degree of cristallinity and to evaluate the dispersion of<br /> montmorillonite and bentonite in the polyurethane matrices, the prepared hybrid materials<br /> were characterized by wide angle X-ray scattering (WAXS).</p>

Poly(arylene ether sulfone)s are high-performance engineering thermoplastics that have been investigated extensively over the past several decades due to their outstanding mechanical properties, high glass transition temperatures (Tg), solvent resistance and exceptional thermal, oxidative and hydrolytic stability. Their thermal and mechanical properties are highly suited to a variety of applications including membrane applications such as reverse osmosis, ultrafiltration, and gas separation. This dissertation covers structure-property-performance relationships of poly(arylene ether sulfone) and poly(ethylene oxide)-containing random and segmented copolymers for reverse osmosis and gas separation membranes. The second chapter of this dissertation describes synthesis of disulfonated poly(arylene ether sulfone) random copolymers with oligomeric molecular weights that contain hydrophilic and hydrophobic segments for thin film composite (TFC) reverse osmosis membranes. These copolymers were synthesized and chemically modified to obtain novel crosslinkable poly(arylene ether sulfone) oligomers with acrylamide groups on both ends. The acrylamide-terminated oligomers were crosslinked with UV radiation in the presence of a multifunctional acrylate and a UV initiator. Transparent, dense films were obtained with high gel fractions. Mechanically robust TFC membranes were prepared from either aqueous or water-methanol solutions cast onto a commercial UDEL® foam support. This was the first example that utilized a water or alcohol solvent system and UV radiation to obtain reverse osmosis TFC membranes. The membranes were characterized with regard to composition, surface properties, and water uptake. Water and salt transport properties were elucidated at the department of chemical engineering at the University of Texas at Austin. The gas separation membranes presented in chapter three were poly(arylene ether sulfone) and poly(ethylene oxide) (PEO)-containing polyurethanes. Poly(arylene ether sulfone) copolymers with controlled molecular weights were synthesized and chemically modified to obtain poly(arylene ether sulfone) polyols with aliphatic hydroxyethyl terminal functionality. The hydroxyethyl-terminated oligomers and α-ω-hydroxy-terminated PEO were chain extended with a diisocyanate to obtain polyurethanes. Compositions with high poly(arylene ether sulfone) content relative to the hydrophilic PEO blocks were of interest due to their mechanical integrity. The membranes were characterized to analyze their compositions, thermal and mechanical properties, water uptake, and molecular weights. These membranes were also evaluated by collaborators at the University of Texas at Austin to explore single gas transport properties. The results showed that both polymer and transport properties closely related to PEO-content. The CO2/CH4 gas selectivities of our membranes were improved from 25 to 34 and the CO2/N2 gas selectivity nearly doubled from 25 to 46 by increasing PEO-content from 0 to 30 wt.% in polyurethanes. Chapter four also focuses on polymers for gas separation membranes. Disulfonated poly(arylene ether sulfone) and poly(ethylene oxide)-containing polyurethanes were synthesized for potential applications as gas separation membranes. Disulfonated polyols containing 20 and 40 mole percent of disulfonated repeat units with controlled molecular weights were synthesized. Poly(arylene ether sulfone) polyols and α,ω-hydroxy-terminated poly(ethylene oxide) were subsequently chain extended with a diisocyanate to obtain polyurethanes. Thermal and mechanical characterization revealed that the polyurethanes had a phase-mixed complex morphology. / Ph. D.