No description available.

Bisacetylenic cabamates/carbonates are most useful compounds in finger mark development, for the synthesis of polymeric gels and other material applications. Organochalogen derivatives are the organic compounds containing chalcogen (S, Se) atoms. They have been used as chiral ligands for enatioselective catalysis, glycosyl donors and in the synthesis of heterocyclic compounds etc. This thesis describes our efforts towards synthesis of bisacetylenic cabamates/carbonates and development new synthetic strategies using rongalite (Na+HOCH2SO2-) and benzyltriethyl ammonium tetrathiomolybate [BnEt3N]2MoS4 as a reducing agents led to obtain various organochalcogen derivatives. We developed a new reagent, hexa-2,4-diyne-1,6-bisoxycarbonyl chloride [Hbc Cl] for the synthesis of symmetrical diacetylenic biscarbamates/biscarbonates and further studied the solid state structures using X-ray crystallography. Later we described a stereoselective method for the hydrothiolation of buta-1,3-diynes derivatives using diaryldichalcogenides in the presence of rongalite and K2CO3. The buta-1,3-diynes underwent stereoselective addition reaction with in situ generated chalocgenate anion from diaryl dichalcogenides which afforded the corresponding (Z)-chalcogenynes. The reactivity of buta-1,3-diynes with diaryl dichalcogenides was further studied at higher temperature led to a mixture of mono chalcogenated and bischalcogenated products. Then an efficient method was developed for the synthesis of enatiopure β-amino sulfides/selenides via ring opening of sulfamidates using diarylchalcogenides with rongalite as reducing agent. Further we synthesized chalcogeno derivatives of sugars from glycosyl halides and diaryl dichalcogenides in the presence rongalite. In addition, the synthesis of mixed glycosyl dichalcogenides has been demonstrated using [BnEt3N]2MoS4 as sulfur transfer agent as well as reducing agent. Finally the reactivity of [BnEt3N]2MoS4 was studied in detail with various isatioc anhydrides which led to the formation of S-benzyl 2-aminobenzothioate derivatives. Further we synthesized S-alkyl/aryl 2-aminobenzothioate derivatives via ring opening of isatoic anhydrides and diaryl/dialkyl chalcogenides by mean of [BnEt3N]2MoS4 as a reducing agent. We extended this method in a one-pot, tandem fashion with various alkyl halides. In this thesis, details of all of the above studies have been described.

Conselho Nacional de Desenvolvimento Científico e Tecnológico / Indium(III) benzenechalcogenolates (chalcogen = sulfur, selenium) prepared from elemental indium and diphenyl dichalcogenide provide an alternative synthetic route to produce carbon-chalcogen bonds. These compounds promote the regioselective hydrochalcogenation of terminal aminoalkynes to produce the Markovnikov adducts; provide a pratical method to prepare organyl phenyl chalcogenides from organyl halides; and their reaction with vinylarenes in aqueous media produces the respectives β-hydroxy selenides. Ditellurides present a different performance compared to others studied dichalcogenides. Indium(I) salts react with tellurium compounds and through extrusion of one tellurium atom produce diaryl tellurides. This work presents new synthetic methodologies and discusses the general aspects and limitations of indium chalcogenolates in the different systems investigated. / Fenilcalcogenolatos de índio(III) (calcogênio = enxofre e selênio), preparados a partir de índio metálico e difenil dicalcogenetos, são uma alternativa em síntese para geração de ligações carbono-calcogênio. Estes compostos promovem a hidrocalcogenação Markovnikov de alquinilaminas terminais com rigorosa regiosseletividade; conduzem, de modo prático, ao preparo de organil fenilcalcogenetos frente a haletos orgânicos; e na reação com estirenos possibilitam a síntese de β-hidroxisselenetos em meio aquoso. Já os diteluretos empregados apresentam comportamento diferenciado em relação aos demais dicalcogenetos estudados. A reação de sais de índio(I) com os compostos de telúrio conduzem a extrusão de telúrio e a obtenção de diaril teluretos. O trabalho desenvolvido, além de apresentar novas metodologias sintéticas, discute as generalidades e limitações dos calcogenolatos de índio nos diferentes sistemas investigados.

Resumen (Castellano) El aumento del consumo de energía global junto con las preocupaciones ambientales ha generado mucho interés por las fuentes de energía alternativas y limpias, como la energía solar fotovoltaica. Los investigadores en la comunidad fotovoltaica han estado buscando formas de reducir costos mientras mantienen o aumentan las eficiencias. Una mejor comprensión de los materiales implicados es esencial para el rápido desarrollo de nuevas tecnologías. Las películas delgadas I-III-VI2 ofrecen sistemas prometedores para lograr células solares de alta eficiencia a un costo menor. De hecho, al adaptar la composición de los compuestos, es posible cambiar la banda prohibida del material para captar la luz solar de manera más eficiente. Esta tesis se centra en la preparación y caracterización del material de la capa absorbente, especialmente las películas delgadas nanocristalinas y la consideración de las características estructurales y eléctricas de dicha capa principal absorbente de células. La tesis examina cómo las diferentes técnicas de preparación y uso del material podrían afectar las propiedades del películas delgadas sintetizadas. Películas delgadas CuInSe2 y CuInS2 se depositaron sobre sustratos de vidrio ITO usando la técnica de electrodeposición en solución acuosa. Las películas electrodepositadas se caracterizaron por difracción de rayos X (XRD), microscopía electrónica de barrido (SEM) y análisis de rayos X de energía dispersiva (EDS). Se investigaron los efectos de recocido sobre los precursores electrodepositados. La estructura de calcopirita de CuInSe2/CuInS2 mostró una mejora de la cristalinidad después del tratamiento posterior de selenización/sulfurización en atmósfera Se/S, respectivamente. Los estudios de XRD y SEM revelaron una mejora de la calidad cristalina de las películas de CIS después de los tratamientos térmicos. Las propiedades ópticas de las películas delgadas recocidas CuInSe2-Se y CuInSe2-S se han estudiado para determinar el efecto del proceso de recocido en diferentes ambientes de selenio y azufre. Además, modificamos el CuInxCryGa1-x-ySe2 de cobre indio, donde x = 0.4, y = (0.0, 0.1, 0.2, 0.3) la capa de superestrato por el proceso de recubrimiento por centrifugado. CuInxCryGa1-xySe2 donde x = 0.4, y = (0.0, 0.1, 0.2, 0.3) nanopartículas han sido sintetizadas en primer lugar usando un método hidrotermal químico húmedo que se basa en un proceso térmico sin vacío sin ningún proceso de selenización adicional. Introduciendo diferentes fuentes de metal en un autoclave con etilenamina como solvente, se obtuvieron nanopartículas de CIGS a diferentes temperaturas en un rango de 190-230 °C. Los resultados de la difracción de rayos X (XRD) confirmaron la formación de una estructura de calcopirita CuInxCryGa1-x-ySe2 tetragonal. Finalmente, se estudió el efecto de la temperatura de recocido en los materiales tipo Kesterita (como el Cu2ZnSnS4) que son materiales de muy bajo costo y que no dañan el medio ambiente. Estudiamos el crecimiento de las películas delgadas cuaternarias Cu2ZnSnS4 (CZTS) de kesterita mediante un depósito electroquímico de un solo paso seguido de un recocido a baja temperatura. La influencia de diferentes atmósferas de recocido a tiempos de recocido constantes (t = 45 min) y parámetros de control de preparación fijos; es decir, concentración de la solución de materiales de partida (sales de metales precursores), tiempo de deposición y potencial de electrodeposición. Se estudiaron las propiedades estructurales, de composición, morfológicas y ópticas, así como las propiedades fotoelectroquímicas. / Abstract Increasing global energy consumption together with environmental concerns has led to much interest in alternative, cleaner sources of energy such as solar photovoltaic. Researchers in the solar cell community have been looking for ways to reduce costs while maintaining or increasing already high efficiencies. A fundamental understanding of the materials under consideration is essential to rapid development of new technologies. The I-III-VI2 thin films offer promising systems for achieving high efficiency solar cells at lower costs. In fact, by tailoring the chemistry of the compounds it is possible to change the bandgap of the material in order to collect sunlight more efficiently. First of all, this thesis focuses on absorber layer material preparation and characterization, especially nanocrystalline thin films and consideration of both structural and electrical characteristics of such main cell absorber layer.The thesis examines how different preparation techniques and material usage could affect the properties of the synthesized thin films (absorber layer). In this study CuInSe2 and CuInS2 thin films were deposited onto ITO glass substrate using the electrodeposition technique in aqueous solution. The electrodeposited films were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and energy dispersive X-ray analysis (EDS). The annealing effects on the electrodeposited precursors were investigated. The chalcopyrite structure of CuInSe2/CuInS2 showed an enhancement of crystallinity after subsequent selenization/sulfurization treatment in Se/S atmosphere, respectively. XRD and SEM studies revealed a dramatic improvement of the crystalline quality of CIS films after annealing treatments. The optical properties of annealed CuInSe2-Se and CuInSe2-S thin films have been studied in order to determine the effect of annealing process in different selenium and sulfur atmosphere. In the second step we modified copper indium CuInxCryGa1-x-ySe2 where x=0.4, y= (0.0, 0.1, 0.2, 0.3)superstrate layer by spin coating process. CuInxCryGa1-x-ySe2 where x=0.4, y= (0.0, 0.1, 0.2, 0.3) nanoparticles have been synthesized firstly using a wet chemical hydrothermal method that is based on a non-vacuum thermal process without any additional selenization process. Introducing different metal sources in an autoclave with ethylenediamine as solvent, CIGS nanoparticles were obtained at different temperatures range 190-230°C. The X-ray diffraction (XRD) results confirmed the formation of a tetragonal CuInxCryGa1-x-ySe2 chalcopyrite structure. Finally, we turned again to the study of the annealing temperature effect onKesterite materials but this time in those of very low-cost materials and environmentally friendly Cu2ZnSnS4. We studied the growth of quaternary Cu2ZnSnS4 (CZTS) kesterite thin films by a single step electrochemical deposition followed by annealing at low temperature. The influence of different annealing atmospheres at constant annealing times (t = 45 min) and fixed preparation controlling parameters; i.e., starting materials (precursor metal salts) solution concentration, time of deposition and electrodeposition potential. Structural, compositional, morphological, and optical properties, as well as photoelectrochemical properties were studied. / Resum (Valencià) L'augment del consum d'energia global juntament amb les preocupacions ambientals ha generat molt d'interès per les fonts d'energia alternatives i netes, com ara l'energia solar fotovoltaica. Els investigadors de la comunitat fotovoltaica han estat buscant formes de reduir costos mentre mantenen o augmenten les eficiències. Una millor comprensió dels materials implicats és essencial per al ràpid desenvolupament de noves tecnologies. Les pel·lícules primes I-III-VI2 ofereixen sistemes prometedors per aconseguir cèl·lules solars d'alta eficiència a un cost menor. De fet, en adaptar la composició dels compostos, és possible canviar la banda prohibida del material per captar la llum solar de manera més eficient. Aquesta tesi se centra en la preparació i caracterització del material de la capa absorbent, especialment les pel·lícules primes nanocristal·lines i la consideració de les característiques estructurals i elèctriques d'aquesta capa principal absorbent de cèl·lules. La tesi examina com les diferents tècniques de preparació i ús del material podrien afectar les propietats del pel·lícules primes sintetitzades. Pel·lícules primes CuInSe2 i CuInS2 es van dipositar sobre substrats de vidre ITO usant la tècnica d'electrodeposició en solució aquosa. Les pel·lícules electrodepositadas es van caracteritzar per difracció de raigs X (XRD), microscòpia electrònica de rastreig (SEM) i anàlisi de raigs X d'energia dispersiva (EDS). Es van investigar els efectes de recuit sobre els precursors electrodepositados. L'estructura de calcopirita de CuInSe2/CuInS2 va mostrar una millora de la cristal·linitat després del tractament posterior de selenització/sulfurització en atmosfera de Se o S, respectivament. Els estudis de XRD i SEM van revelar una millora de la qualitat cristal·lina de les pel·lícules de CIS després dels tractaments tèrmics. Les propietats òptiques de les pel·lícules primes recuites CuInSe2-Es i CuInSe2-S s'han estudiat per determinar l'efecte del procés de recuit en diferents ambients de seleni i sofre. A més, modifiquem el CuInxCryGa1-x-ySe2 de coure indi, on x = 0.4, i = (0.0, 0.1, 0.2, 0.3) la capa d'superstrat pel procés de recobriment per centrifugat. CuInxCryGa1-x-ySe2 on x = 0.4, i = (0.0, 0.1, 0.2, 0.3) nanopartícules han estat sintetitzades en primer lloc fent servir un mètode hidrotermal químic humit que es basa en un procés tèrmic sense buit sense cap procés de selenización addicional. Introduint diferents fonts de metall en un autoclau amb etilenamina com solvent, es van obtenir nanopartícules de CIGS a diferents temperatures en un rang de 190- 230 °C. Els resultats de la difracció de raigs X (XRD) van confirmar la formació d'una estructura de calcopirita CuInxCryGa1-x-ySe2 tetragonal. Finalment, es va estudiar l'efecte de la temperatura de recuit en els materials tipus kesterita (com el Cu2ZnSnS4) que són materials de molt baix cost i que no danyen el medi ambient. Vam estudiar el creixement de les pel·lícules primes quaternàries Cu2ZnSnS4 (CZTS) de kesterita mitjançant un dipòsit electroquímic d'un sol pas seguit d'un recuit a baixa temperatura. La influència de diferents atmosferes de recuit a temps de recuit constants (t = 45 min) i paràmetres de control de preparació fixos; és a dir, concentració de la solució de materials de partida (sals de metalls precursors), temps de deposició i potencial d'electrodeposició. Es van estudiar les propietats estructurals, de composició, morfològiques i òptiques, així com les propietats fotoelectroquímiques / Kamal Abdelhamied Saber, S. (2018). Synthesis and characterization of some nano-selenides and their applications in solar cells [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/107389 / TESIS

In recent years, there has been an increasing interest on renewable energy sources as substitute to fossil fuels. Among various processes of energy generation, electrochemical methods such as storage and conversion systems, electrolysis of water (production of H2 and O2), fuel cells, batteries, supercapacitors and solar cells have received great attention. The core of these energy technologies is a series of electrochemical processes, which directly depend on the nature of ‘electro catalyst’. The design and preparation of an electro catalyst is based on new concepts such as controlled surface roughness, atomic topographic profiles, defined catalytic sites, atomic rearrangements, and phase transitions during electrochemical reactions. Good electro catalysts should possess low over potential, high exchange current density, high stability, low cost and high abundance. The most fundamental reactions in the area of electrochemistry are hydrogen evolution (HER) and oxygen reduction (ORR) reactions. They are important in different energy systems such as fuel cells and batteries. Platinum has been a favoured electro catalyst due to its high activity, favourable density of states at Fermi level and chemical inertness. The low abundance, however, limits its large scale applications. Alternate materials with high catalytic activities are always required. In this particular direction, metal chalcogenides such as sulphides and selenides have attracted attention in recent years. The present thesis describes the synthesis of different phases of palladium and nickel chalcogenides and their applicability in various electrochemical reactions, both in aqueous and organic media. First part includes the synthesis of highly crystalline palladium selenide phases namely Pd17Se15, Pd7Se4 and Pd4Se by employing facile single source molecular precursor method. Pure palladium selenide phases are prepared by thrombolysis of highly processable intermediate complexes formed from metal and selenium precursors. Continuous films of different dimensions on various substrates (glass, ITO, FTO etc.) could be prepared (figure 1). This is one of the requirements for processing any new material. Thickness of the films could be altered by changing the volume of precursor complex coated on the substrate. All the phases are found to be metallic in nature with resistivity values in the range of 30 to 180 µΩ.cm. Figure 1. (a) Scanning electron micrograph and (b) photographic image of Pd17Se15 prepared on different substrates glass (1), Si (2), fluorine doped tin oxide (FTO) (3) and DSSC solar cell fabricated using FTO coated Pd17Se15 as the counter electrode (4). Other components of DSSC are given in the experimental section. All the palladium selenides phases are shown to be catalytically active towards electrochemical reactions such as HER and ORR. It is observed that the activities of the phases depend on the stoichiometric ratio of palladium to selenium. Higher the palladium content in the phase, higher is the catalytic activity observed. Therefore, the activities of the chalcogenides can be easily tuned by varying the ratio of metal to chalcogen. Tafel slopes of 50–60 mV/decade are observed for all three phases towards HER indicating that Volmer- Heyrovsky mechanism is operative. The exchange current densities are in the range of 2.3 x 10-4 A cm-2 to 6.6 x 10-6 A cm-2 (figure 2a). Figure 2. (a) Linear sweep voltammograms of Pd17Se15, Pd7Se4 and Pd4Se in 0.5 M H2SO4 (HER) and (b) 0.1 M KOH (ORR) at a scan rate of 2 mVs-1. These phases are found to be highly robust and stable under different pH conditions. Stability of the phases is confirmed by characterizing the catalysts post-HER process, using various techniques such as XPS, XRD and SEM. High activities observed for Pd4Se is explained based on electrochemically active surface area values determined from under potential deposition studies and also based on DFT calculations. Computational studies reveal the presence of different charge distribution on palladium in all the three phases which is likely to be another reason for varied activities. Palladium selenides are also explored as catalysts towards ORR in alkaline medium. Kinetic parameters and reaction mechanism are determined using RDE studies. All the three phases are found to be active and Pd4Se shows the highest activity, following a direct 4 electron reduction pathway (figure 2b). Other two phases follow 2 electron pathway terminating at hydrogen peroxide stage. Catalytic activity of Pd17Se15 is further improved by Nano structuring of the material and by synthesizing the material on active supports such as rGO, acetylene black and today carbon. ORR plays an important role in metal-air batteries. The palladium chalcogenides are used as electrodes in metal-air batteries. Specific energy density observed in the case of Mg-air primary batteries is higher for Pd4Se than the other two phases (figure 3a). Figure 3. (a) Discharge curves of Mg-O2 battery with different phases of palladium selenides as cathodes. Constant current density of 0.5 mA cm-2 is used for discharge. (b) Characteristic J–V curves of DSSCs with Pd17Se15, Pd7Se4 and Pt as counter electrodes. Versatility of these phases is further studied towards redox reaction in non-aqueous medium (I3-/I-). This reaction plays a crucial role in the regeneration of the dye in dye-sensitized solar cells (DSSC). Palladium selenide phases prepared on FTO plates are employed as counter electrodes in DSSC. The solar light conversion efficiencies are found to be 7.45 and 6.8% for Pd17Se15 and Pd7Se4 respectively and are comparable to that of platinum (figure 3b). The reason for high activities may be attributed to high electronic conductivity and low work function of the phases. The following chapter deals with the synthesis of palladium sulphide phases (Pd4S and Pd16S7) using both hydrothermal and single source precursor methods. Electro catalytic activities of the phases are shown towards HER and ORR and Pd4S exhibits better catalytic activities than that of Pd16S7 phase. Direct electrochemistry of cytochrome c is achieved on Pd4S with ∆E of ~64 mV (figure 4a). Electrochemical oxidation of ethanol, ethylene glycol (EG) and glycerol are also studied on the Pd4S phase and the activity is found to follow the order, glycerol > ethylene glycol > ethanol (figure 4b). Figure 4. (a) Cyclic voltammograms of Pd4S in (1) 0.1 M phosphate buffer solution (pH 7.0) and (2) in presence of 0.2 mM cytochrome c at a scan rate of 50 mVs-1 and (b) Voltammograms of Pd4S in presence of different alcohols (ethanol, EG and glycerol) in 1 M KOH solution at sweep rate of 50 mVs-1. Concentration of alcohols used is 0.1 M. The effect of dimensionality on the electro catalytic activity of nickel selenide phases forms part of the next chapter. Nickel selenide (NiSe) nanostructures possessing different morphologies of wires, spheres and hexagons are synthesized by varying the selenium precursors namely, selenourea, selenium dioxide (SeO2) and potassium selenocyanate (KSeCN), respectively using hydrothermal method. The different selenium precursors result in morphologies that are probably dictated by the by-products as well as relative rates of amorphous selenium formation and dissolution. The three different morphologies are used as catalysts for HER, ORR and glucose oxidation reactions. The wire morphology is found to be better than that of spheres and hexagons for all the reactions. Among the reactions studied, NiSe is found to be good for HER and glucose oxidation while ORR seems to terminate at the peroxide stage. In alkaline medium, nickel forms hydroxides and oxy-hydroxides and these oxyhydroxides are catalytically active towards the oxidation of glucose. Therefore, nickel selenides are employed as highly selective non-enzymatic glucose sensors and detection limit of 5 µM is observed. Electrical measurements on a single nanowire and a hexagon morphology of NiSe are carried out on devices fabricated by focused ion beam (FIB) technique (figure 5). The semiconducting nature of NiSe is revealed in the I-v measurements. The band gap of the material is found to be 1.9 eV and hence the single nanowire and hexagon are shown to act as visible light photodetector. Figure 5. SEM images of (a) single NiSe nanowire and (b) single NiSe hexagon with Pt contacts fabricated by FIB technique. Figure 6. Cyclic voltammograms of NiSe nanowires in 0.5 M aqueous NaOH in the (i) absence and (ii) the presence of 0.5 mM glucose, at a scan rate of 20 mVs-1 and (b) Galvanostatic discharge performance of Ni3Se2 with different morphologies (A, B and C represent Ni3Se2 prepared from SeO2, selenourea and KSeCN respectively). The next chapter includes the synthesis of different morphologies of Ni3Se2 using three different selenium precursors (SeO2, KSeCN and selenourea) and the study of their activities towards electrochemical reactions such as HER and glucose oxidation (figure 6a). Electrical measurements demonstrated the metallic behaviour of the material. These are also shown to be efficient electrode materials in energy storage devices such as supercapacitors with high specific capacitance of 2200 F/g (figure 6b). The studies are summarized in the last chapter with scope for further work. The appendixes show preliminary studies on electrooxidation of glycerol and propanol on Pd supported on TiN, synthesis of other selenides of Ni, Cu, Ag and Ti, and electro synthesis of metal-organic frameworks. (For figures pl refer the abstract pdf file)

Exogenously supplied organoselenium compounds, capable of propagating a selenium redox cycle, were shown to supplement natural cellular defenses against oxidants generated during biological activity. Phenylaminoalkyl selenides were developed in our laboratory as novel substrate analogs for the enzyme dopamine beta-monooxygenase. Recently, phenylaminoalkyl selenides were found to protect plasmid DNA and Molecular beacons from oxoperoxynitrate – mediated damage by scavenging this oxidant and forming the corresponding selenoxides as the sole selenium – containing products. Rate constants were determined for the reactions of the phenylaminoalkyl selenoxides with GSH at physiological pH and 25 degrees C. The kinetic data obtained in current and previous research was subsequently used in a MatLab simulation, which showed the feasibility of selenium redox cycling by GSH in the presence of a cellular oxidant, oxoperoxynitrate. Loblolly pine (LP, Pinus taeda) is the primary commercial species in southern forests covering 11.7 million hectares. Somatic embryogenesis (SE) is an effective technique to implement production of high value genotypes of LP. SE is a multi-step process, which includes initiation of somatic embryo (SME) growth from tree tissue, maintenance and multiplication of early stage SMEs and the maturation / germination phase. In this work, we isolated a substance from stage 2 or 3 LP female gametophyte (FG) tissue that stimulates early stage SME growth, and characterized this substance as citric acid on the basis of 1H NMR and mass spectrometry. We then demonstrated that topical application of citric acid to SMEs stimulates embryo colony growth at p = 0.05 for 3 of the 5 genotypes tested. Phenylketonuria (PKU) is an autosomal recessive disorder caused by an impaired conversion of L-phenylalanine (L-Phe) to L-tyrosine (L-Tyr). A novel assay based on enzymatic - colorimetric methodology (ECA) was developed in order to detect elevated concentrations of L-Phe in undeproteinized plasma of PKU patients via continuous spectrophotometric detection. We report here that L-Phe concentrations in undeproteinized plasma measured using our ECA were comparable to those determined on an amino acid analyzer based on Pearson correlation coefficients and a Bland and Altman comparison.