Despite the numerous advantages associated with using compact cylindrical cyclone gas/liquid separators, particularly for upstream production operations, the lack of a full understanding of the complex hydrodynamic process taking place in it and its “unfamiliarity” to oil field personnel has hindered its widespread use. The complexity associated with this technology is attributed to two limiting physical phenomena, liquid carry-over and gas carryunder. While a lot of work has been done to better understand and predict the liquid carry-over operational envelope, little or no information about methods capable of adequately predicting or characterizing the gas carry-under performance of such separators is available. Traditionally, to mitigate the gas carry-under phenomena, the use of complex control algorithms and systems has been employed. These systems make the technology expensive (as opposed to the potential cost reduction it promises) and impractical for realistic use in the oil field where reliability is of critical importance. A simpler solution, the use of changeable or adjustable inlet-slots that regulate the artificial gravity environment created in the separator, could significantly improve the gas carry-under performance of cylindrical cyclone separators. This research has focused primarily on the use of adjustable inlet-slots. Theoretical analysis and experimental data investigating the benefits of variable inlet geometry have been provided. This work lays the foundation or validation required to perform more tests on a field-scale version to verify the results presented here. A modular design of such a variable inlet-slot inletsection has the potential of simplifying the design and specifications of cylindrical cyclone gas/liquid separators. From the results of this investigation, it was found that the gas carry-under performance of a cylindrical cyclone gas/liquid separator could be improved considerably over a wider range of operating conditions by adjusting the size of the inlet-slots. This contradicts earlier reports of liquid carry-over improvement in separator performance. Also, for the first time, a simple method for theoretically analyzing the percent improvement in separator gas carry-under performance using the optimum g-force concept is presented. This method could be incorporated into design software for determining the slot-size configuration required for varying separator-operating conditions.

The purpose of this report was to investigate whether operators, in the municipality of Örnsköldsvik, comply to current regulations and guidelines regarding oil separator. In addition to this, the report also identify which standards the regulatory authority can demand of identified deficiencies, as well as an examination in how the status of oil separator are in other municipalities in Sweden. First a delimitation was made to only investigate environmentally hazardous activities such as haulage contractors. Inventories were made of a total of 12 haulage contractors, with questions from a previously made checklist. The results of the inventory indicated deficiencies in operators existing knowledge, regular self-inspection of oil separators, control frequency, record-keeping and documentation, lack of 5-year inspection and lack of oil- and sludge level alarm. This report also shows that regulatory authority can require the operators to rectify these deficiencies, in accordance with standards and established guidelines. The report also showed similar results when compared with similar surveys of operators' self-inspection of oil separator, in other municipalities in Sweden. The study suggests that regulatory authority should priority to oversight these environmentally hazardous activities with oil separators.

No description available.

Mercury is the only metal that is in liquid form at room temperature and it has over the years been used in various combinations to extract gold, in measuring devices, medicaments, paper industry, batteries and fluorescent lights as well as in dentistry as dental amalgam. Dental amalgam is a mixture of 50 % mercury and 50% of an alloy consisting of silver, tin, copper and zink particles and has been used in dentistry for many years. The environmental effect of mercury release into the sewer from dental practices and clinics, and the inability of the wastewater treatment plants to remove it from the sludge lead to the introduction of amalgam separators in Sweden in 1980. The ISO standard 11143 regulates the efficacy of the amalgam separators, which should be at a 95% level, but is based on a laboratory test rather than a clinical evaluation. This study looks at the available amalgam separators in use in four areas of Sweden, Uppsala, Stockholm, Östergötland and Skåne and compares their clinical efficiency. The clinical efficiency ranged between 75 to 95%, with most units below the 90% mark. In Östergötland a new improved separator is being tried, the Capere unit, which is based on finely ground pine bark treated with a chelator sensitive to all metals and used in conjunction with a cotton filter and a regular amalgam separator. This was shown to be superior to the other separators, with a 99, 9% removal of even the smallest amalgam particles and ionic mercury from the wastewater before leaving the clinic. Otherwise, combining more than one amalgam separator of the brands available on the Swedish market did not improve the efficiency of them.

No description available.

No description available.

No description available.

No description available.

No description available.

No description available.