This work deals with the modifications of project MeDiMed, which ceased to meet the requirements it imposed. In the first part the main objectives, targets and methods to achieve them are defined. The second part deals with the theory that is needed to understand the issue. In the practical part, which is based on the theory is prepared SWOT analysis and the modified HOS-8 analysis of the current state, whose results are then analyzed. The next section presents design of new solution. The conclusion summarizes all the proposed solutions and knowledge that have been achieved in this work.

This master's thesis deals with analysis and implementation of methods for BitTorrent monitoring focusing on the Mainline DHT protocol. The aim of the thesis was to create a system, that will be looking for BitTorrent peers that participe in the illegal file distribution. Another task of the system was to collect and analyze data for counting size of the BitTorrent network. That was achieved by taking over of existing method. The system was designed and implemented as a module for monitoring of cybernetic crime. It also defines an interface for storing and sharing data, that provides data evaluation, easy data manipulation and serves for possible future extensions.

This master's thesis deals with the design and implementation of optimization and monitoring of the server room. Optimization consists in designing access system and server room temperature measurement, automatic infrastructure start-up and power management, server and network infrastructure optimization, server virtualization management and network monitoring.

Cílem této práce je poskytnout snadný způsob, jak rozšířit analyzační nástroj o rozhraní splňující standard OSLC. Takové rozhraní umožňuje jednoduchou integraci nástrojů s jinými nástroji nebo systémy, umožňuje jejich vzdálené použití skrze webové služby a umožňuje je jednoduše propojit s databází pro databázové dotazy a pro perzistentní uložení dat. Toto je dosaženo návrhem a implementací OSLC adaptéru pomocí sady nástrojů Eclipse Lyo. Adaptér používá jako rozhraní doménu OSLC Automation a je dostatečně univerzální na to, aby skrze toto rozhraní pokryl funkcionalitu většiny analyzačních nástrojů za pomocí jejich stávajících rozhraní na příkazové řádce. Tato práce poskytuje úvod k OSLC, Eclipse Lyo a souvisejícím konceptům. Dále tato práce definuje požadavky a odlišnosti různých analyzačních nástrojů a diskutuje návrh adaptéru a faktory, které ovlivnily návrhová rozhodnutí. A nakonec prezentuje implementovaný adaptér a jeho vyhodnocení pomocí automatizované testovací sady a pomocí experimentů s řadou analyzačních nástrojů. Nejvýznamnější ukazatel hodnocení vytvořeného adaptéru je to, že už teď je používán v praxi pro přidání OSLC rozhraní k nástrojům ANaConDA, Perun, Spectra (všechny tři vyvíjené na VeriFIT) a HiLiTE (Honeywell).

System hardware and software design for a GSM switch with ten switching outputs, controlled via SMS. Description of used GSM module and its properties, feasibility and requirements, design and description of supply circuits for module outputs to relay outputs decoding, plug-in realisation of outputs. GSM module application software creation, remote SMS control requests implementation, sender's phone number check and information about completed requests by call-backs. Adding AT command to set up device. Development of web server providing control of switch throught Internet browser, solving communication between server and device, and data management. Testing of created SW and evaluation of final design from aspects of usage.

This master's thesis is describing problems of embedded systems and their development. Furthermore, the operating system GNU/Linux and it's cross-compiling is described. Hardware problems are analyzed too. Concrete solution is system which is able to boot from the USB disc and it is based on OpenWrt distribution running on Edimax BR-6104KP router. The whole solution is described the way which can lead to any general embedded system.

The master’s thesis describes development of control system for automatic mouth-organ. The process of development is divided into three parts: a concept of control system, design of hardware parts and development of software parts. Controlled device, system requirements and general design of the hardware and software components are described in the concept of control system. The detailed hardware design includes next processes: electronic component selection, printed circuit board design, assembly and debugging. The result of this chapter is electronic system, which function correctly. The aim of the last chapter is to specify and explain development of software parts of control system. Installation of required software and important aspects of control software and user interface development are described in this chapter. The goal of the thesis is to create a control system, which will function correctly and reliably.

This work deals with the modifications of project MeDiMed, which ceased to meet the requirements it imposed. In the first part the main objectives, targets and methods to achieve them are defined. The second part deals with the theory that is needed to understand the issue. In the practical part, which is based on the theory is prepared SWOT analysis and the modified HOS-8 analysis of the current state, whose results are then analyzed. The next section presents design of new solution. The conclusion summarizes all the proposed solutions and knowledge that have been achieved in this work.

This thesis deals with the design and implementation of the document modifications and another annotation editor improvements developed as the part of the Decipher project. Explains the nature of the Decipher project and the inclusion of annotation system 4A in this project. It examines the annotation editor and propose solutions to problems and adding new functionality which makes it easier to work with annotations and also with editor itself.

The subject of this thesis is communication process between a mobile device and a server. The work is concerned with development of application in Windows Mobile in the light of technical limitation. The thesis also deals with the development of application for universal mobile database connector which then enables transparent working with information, obtained from database placed on server, on the mobile device.