No description available.

No description available.

No description available.

This thesis deals with the design of the single point crank press with direct drive. This crank press has an O-shaped stand and an access to the workspace from two sides. The introductory part of this paper describes the principles of mechanical presses drives, drives arrangement presses with direct drive and some conceptual solution stands. The main part of this work is a calculation of basic drive parameters of the press. There are suggested three design variants. The design with the smallest space requirements and good accessibility to the press working space was chosen. The calculation of the main shaft, the input shaft to the planetary gearing and calculation of brake sizes and the planetary gear to the bend and tough was done. Part of this thesis also includes technical drawing of the assembly press, technical drawing of the drive press, technical drawing of the stand a technical drawing of the satelitte gearwheel.

The present Master´s thesis deals with the concept of press drive of Blanking press LKDS 800 used for blanking in automatic blanking line. The first part of the thesis is dedicated to the individual arrangements of press drives and servo press drives and to the description of main components. The second part of this thesis deals with the structural design of the drive. Based on the computation of the crank mechanism, several design solutions were suggested. From these solutions, the option with the lowest drive height is selected. This option, offers the computation of the main drive, flywheel, spur gearing and clutch/brake combination. This computation is followed by computations of individual construction nodes, which include a design and dimensioning of the individual joggles, shafts and bearings. The drawing of the press and clutch shaft assemblies with a list of items are also included.

No description available.

The aim of this thesis is a complex design of the spotting press with a nominal force of 500 kN, which is intended for mating of the both halves of pressing tool for the automotive industry. The press ram is fitted with a hydraulic mechanism which allows the upper clamping board to be tilted in range of 0° -180° and removed from the working space of the press along a profile track. The lower clamping board is a part of moving bolster, which is equipped with a mechanism for lifting and centring. The concept of motion screws is used to drive the ram. Motion screws are mounted in a multiple-part frame and driven by servomotors. The thesis contains background research of the issue, solutions of the main design nodes of the press including calculations, detailed 3D model of the device and partial drawing documentation.

The aim of this thesis is a complex design of the spotting press with a nominal force of 500 kN, which is intended for mating of the both halves of pressing tool for the automotive industry. The press ram is fitted with a hydraulic mechanism which allows the upper clamping board to be tilted in range of 0° -180° and removed from the working space of the press along a profile track. The lower clamping board is a part of moving bolster, which is equipped with a mechanism for lifting and centring. The concept of motion screws is used to drive the ram. Motion screws are mounted in a multiple-part frame and driven by servomotors. The thesis contains background research of the issue, solutions of the main design nodes of the press including calculations, detailed 3D model of the device and partial drawing documentation.