This research produced a new class of skin friction gages that measures wall shear even in shock environments. One test specimen separately measured wall shear and variable-pressure induced moment. Through the investigation of available computational modeling methods, techniques for accurately predicting gage physical responses were developed. The culmination of these model combinations was a design optimization procedure. This procedure was applied to three disparate test conditions: 1) short-duration, high-enthalpy testing, 2) blow-down testing, and 3) flight testing. The resulting optimized gage designs were virtually tested against each set of nominal load conditions. The finalized designs each successfully met their respective test condition constraints while maximizing strain output due to wall shear. These gages limit sources of apparent strain: inertia, temperature gradient, and uniform pressure. A unique use of bellows provided a protective shroud for surface strain gages. Oil fill provided thermal and dynamic damping while eliminating uniform pressure as a source of output voltage. Two Wheatstone bridge configurations were developed to minimize temperature effects first from temperature gradient and then from spatially varying heat flux induced gradient. An inertia limiting technique was developed that parametrically investigated mass and center of gravity impact on strain output. Multiple disciplinary computational simulations of thermal, dynamic, shear, moment, inertia, and instrumentation interaction were developed. Examinations of instrumentation error, settling time, filtering, multiple input dynamic response, and strain gage placement to avoid thermal gradient were conducted. Detailed mechanical drawings for several gages were produced for fabrication and future testing. / Ph. D.

A coupled fluid-structure interaction solver capability is developed and validated. A high fidelity fluids solver, Loci-Chem, is coupled with a finite-element structural dynamics toolkit, MAST. The coupled solver is validated for the prediction of several panel instability cases in uniform flows and in the presence of an impinging shock for a range of subsonic and supersonic Mach numbers, dynamic pressures, and pressure ratios. The panel deflections and limit-cycle oscillation amplitudes, frequencies, and bifurcation point predictions compare very well with benchmark results for 2D simulations. The same procedures outlined in the validation study have been applied to simulations of varying dynamic pressures at M = 2 for an impinging oblique shockwave. The influence of inviscid, laminar and turbulent boundary layer profiles on the development of flow field characteristics has been analyzed, and laminar predictions characterized by a large flow separation results in vastly different behavior than that of traditional flutter.

No description available.