Neste trabalho estudou-se o movimento de uma carga espacial sobre uma matriz fixa, de densidade uniforme, tanto em circuito aberto como fechado. No primeiro caso, circuito aberto, a solução é quase trivial comparada com o outro caso, no qual o problema é finalmente reduzido a uma equação diferencial ordinária, com método de solução análogo ao empregado em problemas de carga espacial monopolar livre. Como ilustração, estudou-se a voltagem e a corrente produzidas por um sistema com carga total nula, mas com excessos locais de carga / In this work the motion of a space charge cloud embedded in a matrix of Constant immobile charge density is studied in open as well as in closed circuit. In the first case, open circuit, the solution is almost trivial as compared as the other one in which, after some work, the problem is reduced to an ordinary diffetential equation. The method of solution is parallel to that employed in the study of monopolar free space charge motion. The voltage and the current produced by a system with no net charge but with unbalanced local charge density were calculated using the general equations derived in the first part of the work

CoordenaÃÃo de AperfeiÃoamento de Pessoal de NÃvel Superior / This dissertation reports applications of artificial neural networks to detect stator winding interturn fault of three phase induction motor drived by frequency inverter. The artificial neural networks, like Simple and Multilayer Perceptron, served as off-line classifiers to short-circuit fault condition or healthy condition. In the training of Multilayer Perceptron, two different algorithms are used: the error back-propagation, which is a classic algorithm, and the extreme learning machine, as a relative new alternative for the classic back-propagation. The new one is more worthwhile because of its implementation easiness and higher speed of computation. The database used on the training and validation of the networks is created from an experimental setting, therefore it is composed by true data. The attributes used as failuresâ indicators are selected from certain frequencies of the spectrum, based on some theories of current signature analysis. In the second instance, the technique of principal components analysis is employed. The results obtained for the designed classifiers are shown, and some considerations are made on their use in real time embedded applications, which is the most important projection for future researches. / Este trabalho deriva da aplicaÃÃo de redes neurais artificiais para a detecÃÃo de curto-circuito entre espiras em motor de induÃÃo trifÃsico, acionado por inversor de frequÃncia. As redes neurais artificiais, do tipo Perceptron Simples e Multicamadas, sÃo usadas para detectar falhas de curto-circuito no bobinamento estatÃrico de motores de induÃÃo trifÃsicos de forma off-line. Para treinamento do Perceptron Multicamadas sÃo usados dois algoritmos distintos: o error back-propagation, que figura como o algoritmo clÃssico na literatura especializada, e o extreme learning machine, que à uma alternativa, relativamente recente, ao algoritmo clÃssico. Este algoritmo à uma opÃÃo atraente para o desenvolvimento rÃpido de classificadores. O banco de dados usado para treinamento e validaÃÃo das redes à obtido a partir de experimentaÃÃo laboratorial, portanto composto de dados reais. Os atributos utilizados para a detecÃÃo da falha sÃo componentes de frequÃncia do espectro harmÃnico da corrente estatÃrica do motor. O critÃrio de escolha destas componentes, a priori, à fundamentado em resultados de investigaÃÃes prÃvias da assinatura de corrente e, em segunda instÃncia, à aplicada a tÃcnica de anÃlise de componentes principais. SÃo apresentados os resultados obtidospelos classificadores projetados, e feitas algumas consideraÃÃes quanto à utilizaÃÃo destes em aplicaÃÃo embarcada e em tempo real, que à a principal projeÃÃo de futuros trabalhos a partir do atual.

Submitted by Renata Lopes (renatasil82@gmail.com) on 2017-04-19T18:21:33Z No. of bitstreams: 1 jorgejaviergimenezledesma.pdf: 1333717 bytes, checksum: c7a67b49a38e446b2cbd5a0b04c85f70 (MD5) / Approved for entry into archive by Adriana Oliveira (adriana.oliveira@ufjf.edu.br) on 2017-04-20T12:30:20Z (GMT) No. of bitstreams: 1 jorgejaviergimenezledesma.pdf: 1333717 bytes, checksum: c7a67b49a38e446b2cbd5a0b04c85f70 (MD5) / Made available in DSpace on 2017-04-20T12:30:20Z (GMT). No. of bitstreams: 1 jorgejaviergimenezledesma.pdf: 1333717 bytes, checksum: c7a67b49a38e446b2cbd5a0b04c85f70 (MD5) Previous issue date: 2012-04-12 / CAPES - Coordenação de Aperfeiçoamento de Pessoal de Nível Superior / Este trabalho propõe o desenvolvimento de modelos e métodos numéricos para a análise da seletividade e coordenação da proteção de sobrecorrente em sistemas de distribuição. A primeira etapa consiste na adaptação de um programa existente para cálculo de defeitos em coordenadas de fase, incorporando dois algoritmos para cálculo de defeitos. As metodologias de cálculo de defeito foram desenvolvidas utilizando as equações de injeção de correntes em coordenadas retangulares. Em seguida, foi desenvolvida e implementada uma formulação trifásica para análise da coordenação e seletividade dos dispositivos de proteção, com capacidade de detectar falhas e indicar limites de coordenação e seletividade dos dispositivos de proteção em sistemas de distribuição. Também foram desenvolvidos modelos matemáticos dos principais equipamentos de proteção e das funções de proteção encontrados em sistemas de distribuição. Foram modelados: fusíveis, disjuntores, relés, religadores, transformadores de corrente e de potencial, bem como as funções de proteção 50 e 51 com base nas normas ANSI e IEC. A metodologia proposta foi desenvolvida no ambiente MatLab® e com o intuito de avaliar sua eficiência foram analisados diversos sistemas testes. Os resultados obtidos dos estudos de cada sistema são apresentados sob forma de coordenogramas, tabelas dos tempos de atuação e gráficos comparativos de tempos. De forma complementar são apresentadas as principais filosofias e critérios utilizados na seleção e coordenação dos dispositivos de proteção. / This work proposes the development of models and numerical methods for the analysis of selectivity and coordination of overcurrent protection in distribution systems. The first step is to adapt an existing program for calculation of faults in phase coordinates, incorporating new algorithms for exact and approximate calculations of fault conditions. The methodologies for fault calculations were developed using the current injections equations in rectangular coordinates. It was then developed and implemented a three-phase formulation for analysis of coordination and selectivity of protection devices, capable of detecting faults and indicating limits of coordination and selectivity in distribution systems. The mathematical models of the main protective equipment and protective functions found in distribution systems were also developed. Fuses, circuit breakers, relays, reclosers, current and potential transformers as well as the protection relay functions 50 and 51 based on the ANSI and IEC standards were modeled. The proposed methodology was developed in MatLab ® and its efficiency was validated using several test systems. The results of studies of each system are presented in the form of Time Currents Curves, tables of operation times and graphs of comparative performance times. As a complement the main philosophies and criteria used in selection and coordination of protective devices are presented.

Studien syftar till att undersöka teorin bakom kortslutningskåpan, dess potential och begränsningar. Undersökningen inleds med en litteraturstudie vilken följs av en fallstudie där ett system med kortslutningskåpa, med avseende på energibehov och systemkostnad, jämförs med ett system med en vanlig kåpa respektive ett system med värmeåtervinning. Litteraturstudien visar att kortslutningskåpan kan minska nettoluftflödet från köket och på så sätt minska uppvärmningsbehovet. Introduceras för stor mängd kortslutningsluft läcker värme och föroreningar från kåpan till köket. Maximalt kunde 21% av det totala frånluftsflödet kortslutas utan läckage. Fallstudiens energiberäkningar har utförts i programmet BELOK Värmeåtervinning samt i ett av författaren kodat program. De tre systemen testades för två fall med olika drifttid, en lunchrestaurang med låg drifttid och en hamburgerrestaurang med hög drifttid. Kortslutningskåpan minskade energibehovet med 15 % och det återvinnande systemet med dryga 80 %. Trots det minskade energibehovet var det värmeåtervinnande systemet inte ekonomiskt lönsamt i lunchrestaurangen, ty drifttiden var för låg för att de höga investeringskostnaderna skulle hinna betala sig. Kortslutningskåpan betalade sig dock efter 4,2 år. I hamburgerrestaurangen, där drifttiden var högre, betalade sig kortslutningskåpan efter 1,3 år och det återvinnande systemet efter 3,2 år. Över 15 år var dock det återvinnande systemet betydligt mer lönsamt. Jämfört med en vanlig kåpa minskade kortslutningskåpan kostnaderna med 13,3 %. Över samma tidsperiod minskade det värmeåtervinnande systemet kostnaderna med 39,5 %. / This study aims to investigate the theory behind the short circuit hood, its potential and limitations. This is done partly as a literature study and partly as a case study where a system with a short circuit hood, in regards of energy demand and system cost, is compared with a system using an exhaust only hood and with a system using heat recovery. The literature study shows that the short circuit hood can reduce the net air flow from the kitchen and thus decrease the heating demand. If too much air is short circuited, heat and contaminations will leak from the hood to the kitchen. A maximum of 21 % of the total exhaust flow could be short circuited without leakage. The energy calculations in the case study were performed using the program BELOK Värmeåtervinning and in a program coded by the author. The three systems were tested for two cases with different operating hours, a lunch restaurant with few operating hours and a hamburger restaurant with many hours. The energy demand was reduced by 15 % using a short circuit hood and by more than 80 % using the heat recovery system. Despite the reduced energy demand, the heat recovery system was not economically profitable in the lunch restaurant, the operating hours were too low for the big investment costs to pay off. However, the short circuit hood payed off after 4,2 years. In the hamburger restaurant where the operating hours was higher, the short circuit hood payed off after 1,3 years and the heat recovery system after 3,2 years. Over 15 years, however, the heat recovery system was significantly more profitable. Compared to an exhaust only system the short circuit hood reduced the costs by 13,3 %. Over the same period, the heat recovery system reduced the costs by 39,5 %.

This Master 's thesis deals with the topic of protection of generators in case of faults, short circuits and their calculation according to the valid standard ČSN EN 60909-0 ed.2. The practical part includes the calculation of the minimum and maximum short-circuit currents of the Lipno I hydroelectric power plant at various locations using the NetCalc calculation program and for comparison of program funcionality provides the manual calculation. Next chapter deals with the calculation of settings of each protection function of the SIEMENS Siprotec 7UM622 protection relay, which is used to protect main generators of this hydropower plant.

In this master’s thesis there is firstly conducted research about pressure measurement. Next there is mathematical description of thermodynamic conditions in used testing chamber by using magnetohydrodynamic and Maxwell equations. Next chapter deals with testing chamber itself, more precisely with function, model and changes done to it. In practical part there are data measured by used sensors, which are also closer described in this chapter. In next chapter there is comparison of reaction times of used sensors and their frequency specters, obtaining using fast Fourier transformation. Second to last chapter introduces very measurement on the real device and in the last chapter these data are analyzed and more closely described.

The diploma thesis is focused on the innovation of partially user-unsuitable software which is used in the CVVOZE short-circuit laboratory for the evaluation of testing of switching and protection devices. The introductory part of the work presents a technical laboratory, which is used for research and development in the field of electrical devices with possibility of testing of short circuits and over-currents. At the first part of thesis, there is made a description of the technical laboratory. The following past is a chapter with basic introduction of tested devices and standard testing conditions of electrical devices in the laboratory. Then following a description of the original evaluation software is made and its shortcomings are pointed out. The practical part is devoted to the creating in LabVIEW, implementation and verification of the functionality of the new evaluation software.

In the Master Thesis discusses the impact of the bridge connecting the transformer to power system connection to a separate transformers. They were first analyzed the method of calculating the steady operation of the network using the Newton iterative method and the method of calculating short-circuit ratios. It describes the area Slavětice 110kV substation, which is the subject of subsequent calculations. It is also elucidating the function of the bridge connection, advantages and disadvantages. The reason for implementing the bridge operation is to increase the reliability of electricity supply to customers but the major disadvantage is the greater technical and economic performance because increased short circuit current and the need for transmission transformer 400/110kV same type with the same parameters. Point is the practical part, which contains already concrete results taken with the dispatcher software Sinaut. There is a short-circuit resistance compared to short-circuit power substation, then the burden of the elements (transformers, lines) for two specified connection alternatives and four interruptions important elements. Finally, it stated that it can be done with the bridge connection which technical measures. It was discovered that in terms of short-circuit ratios in the present time it is not possible to operate the bridge connection transformers substation Slavětice 110kV and in terms of very different parameters of transformers 400/110kV the operation is not recommended.

The thesis deals with the design of a transformer station for the outgoing power of cogeneration unit with an electric capacity of up to 1 MW. The thesis describes the design procedure of individual devices such as a transformer with a nominal ratio 22/0,4 kV, high voltage switchgears and low voltage switchgears. With the proper selection of the transformer, along with the technical parameters, the economic benefits that come from its purchasing and operating costs with the transformer operation are also considered. Based on this, the economic comparison of selected types of oil transformers during 20 years is also developed. Another part of the thesis deals with HV and LV switchgears, which are dimensioned according to shortcircuit conditions in the transformer station. In conclusion this work deals with the grounding of a transformer station and design protection in accordance PPDS.

Electrical power system is an essential technical system intended to power supply. The power drain is still increasing and it is possible to suppose rising trend in the future. Because of this fact there are installed new power sources into the system, so it is important to know manners and parameters of the electricity supply system as well as the new power sources which we are connecting to the grid. Due to these reasons, the electricity supply system is being simplified and described as the steady state operation with different numerical methods. To dimension a connection of the new power source to the grid, it has to be determined short-circuit conditions too.