Thesis (MPH. (Occupational and Environmental Health))-- University of Limpopo, 2012 / Background: The objective of this study was to quantify personal time-weighted average respirable dust and silica exposure of workers at foundries in Gauteng and to rank the occupations in foundries according to the risk of exposure to silica quartz. Methods: A task-based risk assessment of 56 personal samples from two foundries was conducted. Personal exposure data was collected from workers’ breathing zones for the full working shift. All analyses of samples for silica dust were carried out in the CSIR Centre for Mining Innovation’s Laboratory, which has SANAS accreditation (ISO 17025) for both x-ray powder diffraction and particle size analysis methods. Results: The personal time-weighted average mean and median respirable silica dust concentration was 0.184 mg/m³ and 0.167 mg/m³ respectively. The maximum exposure concentration was 0.835 mg/m³ and minimum exposure was 0.010 mg/m³. The occupations within the foundries with the highest exposures were moulders, sand mixers, furnace operators and the lowest exposed occupations were grinders, closers, and casting operators. The majority of foundry workers (62%) in both foundries are exposed to respirable silica dust at above the South African occupational exposure level (OEL). Conclusion and recommendations: Foundry workers are over-exposed to respirable silica dust and are potentially at high risk of contracting silicosis and other occupational diseases associated with respirable silica dust. It is recommended that a dust control programme be implemented and a baseline study be conducted.