Spelling suggestions: "subject:"disulfur battery"" "subject:"radiosulfur battery""
1 |
Electrochemical Flow System for Li-Ion Battery Recycling and Energy StorageYang, Tairan 09 November 2021 (has links)
The wide applications of energy storage systems in consumer electronics, electric vehicles, and grid storage in the recent decade has created an enormous market globally. The electrochemical flow system has many applications in Li-ion battery recycling and energy storage system design. First, research work on a scalable electrochemical flow system is presented to effectively restore the lithium concentration in end-of-life Li-ion cathode materials. An effective recycling process for end-of-life lithium-ion batteries could relieve the environmental burden and retrieve valuable cathode battery materials. The design is validated in a static configuration with both cathode loose powder and cathode electrode sheet. Materials with comparable electrochemical performance to virgin cathode materials are produced after post heat treatment. Second, research contributions in sulfur-based flow battery systems for long-duration energy storage are presented. Sulfur-based redox flow batteries are promising due to their high theoretical capacity, low cost, and high abundance. The speciation of aqueous sulfur solutions with different nominal concentrations, sulfur concentrations, and pH are studied by Raman spectroscopy. Next, a promising aqueous manganese catholyte to couple with the sulfur anolyte for a full flow battery is investigated. Test protocols and quantification metrics for the catholyte are developed. The stability of the catholyte, including self-discharge rate and precipitation rate, is measured via ex-situ characterizations. The electrochemical performance of the catholyte is investigated and optimized via in-situ experiments. The reaction pathway for the precipitation of catholyte is discussed and several mitigation strategies are proposed. Finally, a semi-solid sodium-sulfur flow battery is developed. The electrochemical performance of the sodium-sulfur battery is studied first in a static configuration at an intermediate temperature (150°C). Then a Na-S semi-solid flow cell is assembled and cycled under the two-aliquots and three-aliquots intermittent flow. / Doctor of Philosophy / The market of energy storage systems has been expanding dramatically in recent years due to their wide applications in portable electronics, electric vehicles, and large-scale grid storage. First, the research on the development of an electrochemical flow system in the Li-ion batteries (LIB) recycling process is presented. The improper disposal of end-of-life LIBs will generate flammable hazardous waste. Recycling spent LIBs could ease the environmental burden and replenish valuable resources such as lithium, cobalt, and nickel, and reduce the cost of battery manufacturing. In this study, an electrochemical flow system is designed to restore the end-of-life cathode materials in LIBs. The design has the potential to scale up and is validated with a static configuration. The recycled materials show comparable electrochemical performance to virgin battery cathode materials. Life cycle analysis shows that the recycling process consumes less energy and is more environmentally friendly. Second, the research contribution in sulfur-based flow battery systems for long-duration energy storage is presented. The aqueous sulfur solutions with different nominal concentrations, sulfur concentrations, and pH are studied by Raman spectroscopy. Next, a promising aqueous manganese catholyte to couple with the sulfur anolyte for a full redox flow battery is investigated. The chemical stability of the catholyte, including self-discharge rate and precipitation rate, is measured via ex-situ characterizations. The electrochemical performance of the catholyte is studied and optimized via in-situ experiments. The reaction mechanisms for the precipitation of aqueous manganese solutions are discussed. Finally, a semi-solid sodium-sulfur (Na-S) flow battery is developed. The electrochemical performance of the sodium-sulfur battery is studied first in a static cell at intermediate temperature. Then a Na-S semi-solid flow cell is demonstrated and cycled under the two-aliquots and three-aliquots intermittent flow.
|
2 |
Effect of Electrolytes on Room-Temperature Sodium-Sulfur Battery PerformanceDaniel Jacob Reed (12457485) 26 April 2022 (has links)
<p> </p>
<p>Room-temperature sodium-sulfur (RT Na-S) batteries are an emergent new technology that are highly attractive due to their low raw materials cost and large theoretical specific energy. However, many fundamental problems still plague RT Na-S batteries that prevent their progression from the research and development phase to the commercial phase. Sulfur and its final discharge product are insulators, and intermediate polysulfide discharge products are soluble in commonly used liquid electrolytes. As a result, RT Na-S cells exhibit large capacity defects, low coulombic efficiencies, and rapid capacity fading. Additionally, the reactive sodium metal anode can form dendrites during cycling, which reduces capacity and shortens cell life. One way to combat these issues is the judicious selection of electrolyte components. In this study, the effects of monoglyme (G1), diglyme (G2), and tetraglyme (G4) glyme ether electrolyte solvents on RT Na-S cell performance are investigated. Galvanostatic cycling of Na/Na symmetric coin cells reveals that the G2 solvent enable stable cycling at low overpotentials over a wide range of current densities. In contrast, the G1-based cells show evidence of dendritic plating, and G4-based cells are not suitable for use at high current densities. Electrochemical impedance spectroscopy during cycling confirms that the G2 solvent facilitates the formation of a strong, stable SEI on the Na electrode surface. Results from galvanostatic cycling of RT Na-S full coin cells demonstrates that G1-based cells deliver the highest initial specific discharge capacities among the three cell types, but G4-based cells are the most reversible. Infinite charging, the indefinite accrual of charge capacity at the high charge voltage plateau, affects all cell types at different cycle numbers and to different extents. This behavior is linked to the strength of the polysulfide shuttle during charge. Optical microscopy experiments show that G2 and G4 facilitate the formation of the S3•- sulfur radical, which reduces capacity. G1 minimizes the radical formation and thus delivers higher initial specific discharge capacity. In order to fully optimize the electrolyte for RT Na-S cells, future work should study glyme solvent blends, additives, and concentrated salts.</p>
|
Page generated in 0.046 seconds