As is the case for DC-DC converters, multi-phase converters require both high-quality power control and high power-density. Although a higher switching frequency not only improves the quality of the converter output but also decreases the size of the converter, it increases switching losses and electromagnetic interference (EMI) noise. Since the soft-switching topologies reduce the switching losses of the converter main switches, the topologies make converters partially independent from the switching frequency. However, the conventional soft-switching topologies have already proposed most of the possible ways to improve converter performance. In addition, the trends of the newly generated power devices reduce the advantages of soft-switching topologies. This critical situation surrounding soft-switching topologies gives research motivations: What features of soft-switching topologies facilitate their practical applications? Given this motivation, the dissertation discusses two aspects = simplifying auxiliary circuits and accounting for the effects of soft-switching operations on the converter control. Engineers working with medium- and high-power multi-phase converters require simplified soft-switching topologies that have the same level of performance as the conventional soft-switching topologies. This demand is the impetus behind one of the research objectives = simplifying the auxiliary circuits of Zero-Voltage-Transition (ZVT) inverters. Simplifying the auxiliary circuits results in both a smaller number of and lower cost for auxiliary components, without any negative impact on performance. This dissertation proposes two major concepts for the simplification - the Single-Switch Single-Leg (S3L) ZVT cell and the Phase-Lock (PL) concept. Throughout an effort to eliminate circulating currents of inductor-coupled (IC) ZVT converters, the S3L ZVT cell is developed. The proposed cell allows a single auxiliary switch to achieve zero-voltage conditions for both the top and bottom main switches, and it achieves the same level of performance as the conventional ZVT cell, as well. This proposal makes IC ZVT topologies more attractive to multi-phase converter applications. Because all of the top main switches generally have identical sequences for zero-voltage turn-on commutations, one auxiliary switch might handle the commutations of all of the top main switches. This possibility introduces the PL concept, which allows the two auxiliary switches to provide a zero-voltage condition for any main switch commutation. In order to compensate for restrictions of this concept, a modified space-vector modulation (SVM) scheme also is introduced. A soft-switching topology changes the duty ratios of the converter, which affects the controllability of the converter. Therefore, this dissertation selects resolution of this issue as one of the research objectives. This dissertation derives the generalized timing equations of ZVT operations, and the generalized equations formulize the effect of ZVT operation on both duty ratios and DC current. Moreover, the effect of SVM schemes is also investigated. An average model of the ZVT converter is developed using both the timing analysis and the investigation of SVM schemes, and small-signal analysis using the average model predicts the steady-state characteristics of the converter. / Ph. D.

This dissertation presents voltage stabilization techniques for flying capacitors used in soft-switching multilevel active power filters. The proposed active filter has proved to be a solution for power system harmonics produced by static high power converters. However, voltage unbalance of the clamping capacitors in the active filter in practical applications was observed due to its unequal parameters. Thus, the fundamentals of flying capacitors were characterized dealing with voltage balancing between flying capacitors and dc capacitors under practical operation, rather than ideal conditions. The study of voltage balancing provides the fundamental high-level solutions to flying capacitor based multilevel converter and inverter applications without additional passive balancing circuits. The use of proposed voltage balancing techniques made it possible to have a simple structure for solving the problems associated with the conventional bulky passive resistors and capacitor banks. Furthermore, the proposed control algorithms can be implemented with a real time digital signal processor. It can achieve the high performance of the active filter by compensating an adaptive gain to the controller. The effectiveness of the proposed controller was confirmed through various simulations and experiments. The focus of this study is to identify and develop voltage stabilization techniques for flying capacitors used in a proposed active filter. The voltage unbalance is investigated and characterized to provide safe operations. After having defined the problems associated with the voltage unbalance, the most important voltage stabilization techniques are proposed to solve this problem, in conjunction with an instantaneous reactive power (IRP) control of an active filter. In order to reduce the switching losses and improve the efficiency of the active filter, the proposed soft-switching techniques were evaluated through simulation and experimentation. Experimental results indicate that the proposed active filter achieved zero-voltage conditions in all of the main switches and zero-current turn-off conditions to the auxiliary switches during commutation processes. Also, various studies on soft-switching techniques, multilevel inverters, control issues and dynamics of the proposed active filter are discussed and analyzed in depth. / Ph. D.

Switched mode power supplies (SMPS) are being extensively used in most power conversion processes. The analysis, design and modeling processes of hard-switched converters are mature, where the switching frequency was limited to a few 10's of kHz. The present direction of evolution m SMPS is towards higher efficiency and higher power density. These twin objectives demand high switching frequency and low overall losses. Soft switching results in practically zero switching losses and extends the switching frequency to 100's of kHz and beyond. This thesis presents novel variants of push-pull and half-bridge DC-DC converters with soft switching properties. The proposed topology uses two additional switches and two diodes. The additional switches introduce freewheeling intervals m the circuit and enable loss-less switching. Switch stress, control and small signal model are similar to hard-switched PWM converter. Synchronous rectifiers are used in the ZVS push-pull converter to achieve high efficiency. It is interesting to see that the drives for the synchronous rectifier device are practically the same as the additional switches. The contributions made in this thesis are 1) Idealized analysis and design methodology for the proposed converters. 2) Validation of the design through circuit simulation as well as prototypes - a 300kHz, 200W push-pull converter and a 300kHz, 640W half-bridge converter. 3) Closed loop control design for desired bandwidth and accuracy Verification of loop gain through network analyzer instrumental for the same The loop gain bandwidth achieved is about 30kHz for the push-pull converter and 20kHz for half-bridge converter. An appendix has been devoted to explain the use of network analyzer. Characterization of coil, transformer and capacitor are explained in detail. Measurement techniques for measuring the small signal parameters of power supply are also explained in the appendix.