Spelling suggestions: "subject:"soil dimensionalmathematical models"" "subject:"soil spectroscopy.mathematical models""
1 |
EROSION MODELING FOR UPLAND AREASMartinez-Menez, Mario Roberto January 1979 (has links)
No description available.
|
2 |
A stochastic model for soil erosion.Mossaad, Mostafa El-Sayed January 1981 (has links)
No description available.
|
3 |
Gully erosion on rehabilitated bauxite minesMengler, Faron January 2008 (has links)
[Truncated abstract] Landforms rehabilitated after bauxite mining can be vulnerable to soil loss by water erosion processes. On most rehabilitated sites, management controls such as deep ripping, contour mounding and landscaped sub-catchments limit erosion. Despite these measures, severe gully erosion that is anecdotally associated with steep slopes can damage rehabilitated areas and affect downstream drinking water resources. A review of erosion dynamics reveals that gullies develop episodically and in a non-linear manner. They often initiated as a near surface process and are influenced by natural climatic drivers. Despite this, local site characteristics including soil and landform can predispose an area to gully erosion. Moreover, erosion models, becoming more-widely utilized within the mining industry, may provide useful tools with which to measure, analyse, and manage gully erosion. One of these models, SIBERIA was tested to determine its suitability for application a tool to help manage erosion risk. We first surveyed 26 eroding and erosion-prone rehabilitated hillslopes to determine the common form and setting for gully erosion on these rehabilitated bauxite mines. A conceptual model was developed to include and explore the interplay between the common causes of the gullies surveyed. The conceptual model accounts for slope steepness but suggests that additionally, certain triggers and threshold effects operating under different site conditions are as influential (or even more influential) than slope steepness as determinants of gully erosion occurrence and severity. ... Soil properties and soil erodibility had some subtle influence on landform stability and erosion risk. The most-erodible media occurred where either: mine floor material was mixed with topsoil/ overburden; and/or the topsoil/overburden layer was thin or its coverage is patchy resulting in slaking subsoil, hardsetting soil and surface crusts. When erodible surface media were combined with steeper (>8[degrees]) or longer (>50 m) slopes or with any major erosion trigger, rill and gully development was greatly intensified. The SIBERIA simulation model was calibrated and its simulated outputs were compared to known locations of gully erosion on a steep, rehabilitated pit from the Willowdale mine. At a resolution of one metre, SIBERIA was able to simulate the approximate dimensions of gullies. However, SIBERIA could not simulate the exact location of individual gully headcuts. Additionally, SIBERA was able to simulate the effect of different microtopographic surface treatments but this was only achieved by increasing the grid resolution to 25 cm and reducing the size of the area simulated due to model constraints. Locations of gully headcuts were overlain onto a grid-based, Digital Elevation Model (DEM) using a Geographic Information System (GIS). The spatial distribution of gully headcut locations was compared to DEM derivatives such as slope and flow accumulation. Positive, and predictive relationships allow between the steepness of the slope of the pre-mining landform and the cell count of the area contributing to flow (catchment), as determined by GIS, may allow a mine scale indication of erosion risk using simple GIS desktop analysis.
|
4 |
Field-based aeolian sediment transport threshold measurement : sensors, calculation methods, and standards as a strategy for improving inter-study comparisonBarchyn, Thomas Edward, University of Lethbridge. Faculty of Arts and Science January 2010 (has links)
Aeolian sediment transport threshold is commonly defined as the minimum wind speed (or shear stress) necessary for wind-driven sediment transport. Threshold is a core parameter in most models of aeolian transport. Recent advances in methodology for field-based measurement of threshold show promise for improving parameterizations; however, investigators have varied in choice of method and sensor. The impacts of modifying measurement system configuration are unknown. To address this, two field tests were performed: (i) comparison of four piezoelectric sediment transport sensors, and (ii) comparison of four calculation methods. Data from both comparisons suggest that threshold measurements are non-negligibly modified by measurement system configuration and are incomparable. A poor understanding of natural sediment transport dynamics suggests that development of calibration methods could be difficult. Development of technical standards was explored to improve commensurability of measurements. Standards could assist future researchers with data syntheses and integration. / xi, 108 leaves : ill. ; 29 cm
|
5 |
A distributed sediment delivery ratio concept for sediment yield modelling.Hagos, Dawit Berhane. January 2004 (has links)
Identifying areas of the hillslope that are most sensitive to soil erosion and contribute significantly to sediment yield is a primary concern in environmental protection and conservation. Therefore the ability to predict the magnitude and variability of soil erosion and sediment yield is important to catchment managers in order to select the appropriate conservation practices that keep soil erosion and sediment yield within the tolerable limits. A number of models have been developed for simulating soil erosion and sediment yield from a catchment. However, none of them are universally applicable and most of them require extensive data which are extremely costly, time consuming and sometimes not available except in research catchments. Hence it was concluded that the combined use of an empirically based soil loss model, RUSLE, Geographic Information Systems (GIS) techniques, and a Sediment Delivery Ratio (SDR) concept would be a candidate modelling tool, which would be a compromise between the advantages of simplicity, data availability, the complex spatial variability of hydrological and geomorphological characteristics of a catchment and the economic limitation of field data measurements in sediment yield studies. Such a modelling tool was developed in this research and was able to identify sediment source areas and predict annual sediment yield from catchments. Data from the Henley catchment, South Africa have been used for demonstrating the potential use of the model in soil erosion and sediment yield studies. Arcview GIS grid functions were used to define the flow direction, accumulation, pathways, and velocity in a catchment as a function of topography and land use and to describe spatially variable input and output information. In addition the Arcview GIS grid function was used to discretise the catchment into hydrologically homogeneous grid cells to capture the catchment heterogeneity. The gross soil erosion in each cell was calculated using the soil loss model RUSLE while a distributed topography based SDR parameter was used to determine the mass of eroded sediment that would be transported to the nearest stream and ultimately to the catchment outlet. The average annual soil loss and sediment yield values were 26 t. ha-1.yr -1 and 1.6 t. ha-1.yr -1 respectively. High soil erosion and sediment yield rates are evident in the residential and agricultural areas, which are characterised by degradation due to overgrazing and traditional and peri-urban settlements with mixed crops. The average annual SDR value was 0.19 for the Henley catchment and large SDR values are associated with areas adjacent to the channel system. This can be explained by recognizing that the SDR is significantly influenced by characteristics of the drainage system. Comparison of event based simulations of sediment yields to those estimated from measurements demonstrated that the proposed model predictions ranged between 13 % and 60 % of the measured estimates, consistently over predicting. This is because the SDR component of the model is developed as a mean annual parameter, assuming that over a long period a stream system must intimately transport all the sediments delivered to it. Hence the channel network sediment delivery parameters would have to be considered at short temporal scales. Comparing the results of the model prediction against other sediment modelling techniques in South Africa demonstrated the usefulness of the model as an effective catchment management tool. The model has advantages over these other techniques since it includes a distributed grid based component, which enables the identification of sediment source areas in the catchment. The sensitivity analysis shows that the model was highly sensitive to parameters derived from topography and land use of the catchment. Future research with the model should include further testing and analysis of its components on different catchments. The topography based SDR concept which is a key component in sediment routing for prediction of either long term average sediment yield or isolated storm event simulation from a catchment warrants specific attention. Effort in future should focus on identifying parameters which affect the sediment delivery within a catchment. This may be achieved by incorporating processes describing the movement of sediments in the channel network of the catchment. / Thesis (M.Sc.)-University of KwaZulu-Natal, Pietermaritzburg, 2004.
|
Page generated in 0.2939 seconds