No description available.

No description available.

A two year study was initiated in 2001 on a 2.4 ha site of mostly St. Amable loamy sand and shallow loamy sand at the Macdonald Campus Research Farm. This study sought to assess the effects of long term tillage and residue practices on soil physical properties and to relate these properties to their influence on total carbon, total nitrogen and soil microbial biomass-carbon. The site was set up as a factorial experiment with three tillage practices (no till---NT; reduced till---RT; and conventional till---CT) and two residue practices (with residue (grain corn), +R; without residue (silage corn), -R). Soil physical properties measured were bulk density, macroporosity at -6 kPa, saturated hydraulic conductivity (Ksat ), dry aggregate distribution, soil moisture and soil temperature. Wheel versus non-wheel track bulk density was also determined in the NT plots. Total porosity, soil water characteristic curves and pore volume distribution were derived from field samples. Crop yield was also assessed. Tillage alone had an effect on total porosity, bulk density, pore diameter and macroporosity. No individual physical property was significantly affected by the residue treatments; however, the tillage and residue interaction was significant for Ksat, soil moisture and soil temperature. Dry aggregate distribution was not affected by either tillage, residue or the combination of the two. Tillage affected total carbon and total nitrogen in the 0--0.10 m depth. Soil microbial biomass-carbon was affected by residue inputs. Total carbon and nitrogen were influenced by the bulk density, but none of the other soil physical properties. Soil microbial biomass-carbon was not influenced by any of the physical properties. Tillage and residue practices had no significant effect on crop yield for either year.

In 1991, a project was initiated at Quinn and Ormstown, two sites with soils representative of Quebec's present-day agriculture. Three field management techniques were studied related to their possible impact on the soils: tillage, rotation, and N fertilization. The three treatments were randomly assigned in two blocks of a split-split-plot design. The main treatment, tillage, had two levels, conventional tillage (CT) and no-till (NT). The sub-treatment was represented by five 4-year rotations, starting from 1991 as follows: CCCC (continuous corn), CSAC (corn-soybean-alfalfa-corn), CSCS (corn-soybean-corn-soybean), SCSC (soybean-corn-soybean-corn) and SSSS (soybean monocrop). The third factor was N fertilization, at three different rates: 0, 90, and 180 kg/ha, excepting the continuous soybeans which received lower rates of, respectively, 0, 20 and 40 kg N/ha. Soil sampling was performed in 1994, during the last year of the 4-year rotations, at two different moments over the growing season, June and August, for all analysed soil properties, except aggregate stability and organic matter for which samples were taken only in September. (Abstract shortened by UMI.)

No description available.

No description available.

A two year study was initiated in 1999 at the Macdonald Campus Farm, on a 2.4 ha site consisting mainly of St-Amable sand to shallow loamy sand (Typic Endoaquent; Humic Gleysol). The site was planted to alfalfa ( Medicago sativa) prior to the establishment of the experimental design and has been planted to corn (Zea mays L.) since 1991. The experiment was set up as a randomized complete block design and consisted of three tillage levels (NT, no-till; RT, reduced tillage; and CT, conventional tillage) and two residue levels (-R, no residues; +R, with residues). This study was performed in order to ascertain the effect of these management systems on soil organic carbon (SOC), particulate organic matter carbon (POM-C), microbial biomass carbon (MBC) levels and soil physical properties. Soil physical properties measured included bulk density, saturated hydraulic conductivity (Ksat), dry and wet aggregate stability, total porosity, macroporosity at -1 kPa and -6 kPa of matric potential, and moisture content. Crop yield was also measured. Results indicated that lower rates of mineralization of POM-C under NT+R in the surface 0--10 cm led to significantly higher SOC at the same depth. There were no significant differences between treatments at the 10--20 cm depth. The MBC was not a good indicator of the differences in soil organic matter levels between treatments. No-till treatments had higher bulk densities, reduced total porosity and macroporosity, increased moisture content, and increased constant-head measured Ksat. Differences in Ksat as measured with the Guelph permeameter, were not significant between treatments, most likely due to increased earthworm activity in NT. There were no significant differences in crop yield in 1999, but a significantly wetter year in 2000 caused lower grain yields in NT+R compared to NT-R and CT+R.

No description available.