Geogrids have been used for decades as reinforcement for mechanically stabilized earth retaining walls and base layers of pavements. However, literature on these applications is contradictory regarding the displacement and strain levels at which the bearing mechanism of interaction between soil and geogrid is developed along the transverse ribs of geogrids. No data are available on the deflections and displacement profiles of transverse ribs during loading of geogrids. Field and laboratory data on strain distributions along geogrids are limited. Accordingly, the objective of this study is to better understand the mechanisms of soil-geogrid interaction that develop at different stages of pullout tests, especially at small displacements and strains. Moreover, the behavior of transverse ribs throughout pullout testing is evaluated. Pullout loads were obtained from a load cell synchronized with two 5 MP cameras. Images of the geogrid were analyzed using the Particle Image Velocimetry (PIV) technique to obtain displacement profiles along the entire geogrid specimen throughout the duration of the test. Five transparent pullout tests were conducted using a confining pressure of 35 kPa (5 psi) on polypropylene geogrids with different configurations. Displacements along the polypropylene geogrid used in this study are well represented by an exponential equation. The bearing mechanism along transverse ribs was observed to develop at small viii displacements. The contribution of the bearing mechanism was first observed at 25 % of the maximum pullout force. Interference between transverse ribs was first observed at approximately 60 % of the maximum pullout force. High interference between transverse ribs was observed when the ratio of spacing between transverse ribs (S) over the thickness of the transverse ribs (B) was equal to 24. Negligible interference was observed when S/B was equal to 57. Displacements of soil particles were observed when the ratio distance from the soil-geogrid interface (d) over the D₅₀ of the soil was equal to 3, but they were orders of magnitude smaller than the displacements of the geogrid specimens. The observed boundary of the zone of influence of geogrids was for values of 3 < d/D₅₀ < 7 for the transparent soil used in this study. / text

Increasing quantities of dredged material (DM) from navigation waterways have led to a growing need to find alternative methods of disposal. Using this material in earthwork construction is a very attractive avenue, but poses concern of quality from a geotechnical standpoint. By blending DM with granular materials like industrial steel slag fines (SSF), studies have showed that the geotechnical properties of the mixture are greatly enhanced. If these materials can be proven to be competitive for use in earthwork construction, they would pose as an economically viable alternative, and would obviate the need for the relatively expensive conventional granular backfill. The scope of this project entailed the characterization of pullout interaction of SSF-DM blends in different proportions with Tensar uniaxial geogrids to determine an optimal combination for usage in earthwork construction. The media used for testing included the individual SSF and DM materials, and the 80/20, 50/50 and 20/80 blends mixed based on dry unit weights of the individual components. The SSF media comprised of particles smaller than 3/8 in. and classified as SW, while the DM was classified OH soil. Two Tensar uniaxial geogrids UX1400 and UX1700 were undertaken for the study. Pullout tests were conducted and performances of all the blends are compared with each geogrid at various normal pressures. Pullout loads and interaction coefficients give an idea of the quality of the interaction, and are studied in this thesis. Also, various variables that could potentially affect the pullout interaction are identified and investigated. Results show remarkably high pullout resistances for the 100% SSF and 80/20 SSF/DM media, and high interaction coefficients indicating excellent pullout interaction, even better than conventional sands. It was also clear that the dredged material exhibits very poor pullout interaction with geogrids. The 50/50 and the 20/80 SSF/DM media were significantly lower than the 80/20 SSF/DM blend in terms of quality of pullout interaction, but still higher than the 100% DM. The results observed with the 80/20 SSF/DM blend show that it is a suitable backfill material and also poses to be a very competitive and cost-effective alternative to be used in earthwork construction. / text