Yes / This article presents a miniaturized triple-band antenna for Internet of Things (IoT) applications. The miniaturization is achieved by using a split square ring resonator and half ring resonator. The antenna is fabricated on an FR4 substrate with dimensions of (33 × 22 × 1.6) mm3. The proposed antenna resonates at the frequencies 2.4 GHz, 3.7 GHz, and 5.8 GHz for WLAN and WiMax applications. The obtained −10 dB bandwidth for the three bands of the proposed antenna are 300 MHz, 360 MHz, and 900 MHz, respectively. The measured reflection coefficient values of the proposed antenna corresponding to each resonant frequency are equal to −14.772 dB, −20.971 dB, and −28.1755 dB, respectively. The measured gain values are 1.43 dBi, 0.89 dBi, and 1 dBi, respectively, at each resonant frequency. There is a good agreement between the measured and simulated results, and both show an omnidirectional radiation pattern at each of the antenna resonant frequencies that is suitable for IoT portable devices.

Split ring resonator (SRR) is a metamaterial structure which displays negative permeability values over a relatively small bandwidth around its magnetic resonance frequency. Unit SRR cells and arrays have been used in various novel applications including the design of miniaturized microwave devices and antennas. When the SRR arrays are combined with the arrays of conducting wires, left handed materials can be constructed with the unusual property of having negative valued effective refractive indices. In this thesis, unit cells and arrays of single-ring multiple-split type SRR structures are numerically analyzed by using Ansoft&rsquo / s HFSS software that is based on the finite elements method (FEM). Some of these structures are constructed over low-loss dielectric substrates and their complex scattering parameters are measured to verify the numerical simulation results. The major purpose of this study has been to establish equivalent circuit models to estimate the behavior of SRR structures in a simple and computationally efficient manner. For this purpose, individual single ring SRR cells with multiple splits are modeled by appropriate two-port RLC resonant circuits paying special attention to conductor and dielectric loss effects. Results obtained from these models are compared with the results of HFSS simulations which use either PEC/PMC (perfect electric conductor/perfect magnetic conductor) type or perfectly matched layer (PML) type boundary conditions. Interactions between the elements of SRR arrays such as the mutual inductance and capacitance effects as well as additional dielectric losses are also modeled by proper two-port equivalent circuits to describe the overall array behavior and to compute the associated transmission spectrum by simple MATLAB codes. Results of numerical HFSS simulations, equivalent circuit model computations and measurements are shown to be in good agreement.

Metamaterials attracted significant attention in recent years due to their potential to create novel devices that exhibit specific electromagnetic properties. In this thesis, we investigated transmission and propagation properties of novel metamaterial structures. Electromagnetic properties of metamaterials are characterized and the resonance mechanism of Split Ring Resonator (SRR) structure is investigated. Furthermore, a recent lefthanded metamaterial structure for microwave regime called Fishnet-type metamaterial is studied. We demonstrated the left-handed transmission and negative phase velocity in Fishnet Structures. Finally, we proposed and successfully demonstrated novel approaches that utilize the resonant behavior of SRR structures to enhance the transmission of electromagnetic waves through sub-wavelength apertures at microwave frequency regime. We investigated the transmission enhancement of electromagnetic waves through a sub-wavelength aperture by placing SRR structures in front of the aperture and also by changing the aperture shape as SRR-shaped apertures. The incident electromagnetic wave is effectively coupled to the sub-wavelength aperture causing a strong localization of electromagnetic field in the sub-wavelength aperture. Localized electromagnetic wave gives rise to enhanced transmission from a single sub-wavelength aperture. The proposed structures are designed, simulated, fabricated and measured. The simulations and experimental results are in good agreement and shows significant enhancement of electromagnetic wave transmission through sub-wavelength apertures by utilizing proposed novel structures. Radius (r) of the sub-wavelength aperture is approximately twenty times smaller than the incident wavelength (r/&amp / #955 / ~0.05). This is the smallest aperture size to wavelength ratio in the contemporary literature according to our knowledge.